Немного офф, но с другой стороны и не офф.
По поводу RT-N16. Был вопрос, что там за ядро. Догадайтесь с одного раза.
Code:
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Dec 4 16:48:54 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.3
CPU type 0x19740: 532MHz
Tot mem: 131072 KBytes
CFE mem: 0x80700000 - 0x8079AE30 (634416)
Data: 0x80731670 - 0x807343A0 (11568)
BSS: 0x807343A0 - 0x80734E30 (2704)
Heap: 0x80734E30 - 0x80798E30 (409600)
Stack: 0x80798E30 - 0x8079AE30 (8192)
Text: 0x80700000 - 0x80731670 (202352)
Device eth0: hwaddr 00-90-4C-08-00-2D, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 1585152 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00019740, options: 0x000021cd
Primary instruction cache 32kb, linesize 32 bytes (4 ways)
Primary data cache 32kb, linesize 32 bytes (4 ways)
Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.2.3 with Broadcom modifications) #18 Thu Dec 4 11:19:32 CST 2008
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
On node 0 totalpages: 32767
zone(0): 32767 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4716 rev 1 at 532 MHz
Calibrating delay loop... 265.42 BogoMIPS
Memory: 127872k/131068k available (1352k kernel code, 3196k reserved, 112k data, 64k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
Flash device: 0x2000000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 918
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "boot"
0x00040000-0x01fe0000 : "linux"
0x000e5a94-0x01fe0000 : "rootfs"
0x01fe0000-0x02000000 : "nvram"
Found a 0MB serial flash
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (1023 buckets, 8184 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Using /lib/modules/2.4.20/kernel/drivers/net/emf/emf.o
Using /lib/modules/2.4.20/kernel/drivers/net/igs/igs.o
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/bcm57xx/bcm57xx.o
insmod: init_module: bcm57xx: No such device
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Hit enter to continue...telnetd: starting
port: 23; interface: any; login program: /bin/sh
WARNING: console log level set to 1
vlan1: No such device
ifconfig: No such device
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
br1: Network is unreachable
killall: upnp: no process killed
UPnP::upnp_init:UPnP daemon is ready to run
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
Hit enter to continue...Hit enter to continue...
BusyBox v0.60.0 (2008.11.17-08:51+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
#
# cat /proc/cpuinfo
system type : Broadcom BCM4716 chip rev 1
processor : 0
cpu model : V4.0
BogoMIPS : 265.42
wait instruction : no
microsecond timers : yes
tlb_entries : 64
extra interrupt vector : no
hardware watchpoint : yes
VCED exceptions : not available
VCEI exceptions : not available
unaligned_instructions : 0
System clocks
(cpu/mem/si/xtal) : 532/266/133/20 Mhz.
dcache hits : 2147483648
dcache misses : 3750653946
icache hits : 2147483648
icache misses : 1840993899
instructions : 2147483648
# wl revinfo
vendorid 0x14e4
deviceid 0x4329
radiorev 0x72056000
chipnum 0x4716
chiprev 0x1
corerev 0x11
boardid 0x4cf
boardvendor 0x14e4
boardrev P221
driverrev 0x50a3803
ucoderev 0x1fc0066
bus 0x0
phytype 0x4
phyrev 0x5
anarev 0x8
# wl status
SSID: "Broadcom"
Mode: Managed RSSI: 0 dBm noise: 0 dBm Channel: 11
BSSID: 00:90:4C:09:00:2D Capability: ESS ShortSlot
Supported Rates: [ 1(b) 2(b) 5.5(b) 6 9 11(b) 12 18 24 36 48 54 ]
802.11N Capable:
Chanspec: 2.4GHz channel 11 20MHz (0x2b0b)
Control channel: 11
802.11N Capabilities:
Supported MCS : [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
# wl cap
ap led wme pio 802.11d 802.11h rm cqa mbss16 afterburner ampdu amsdurx amsdutx
Богомипсов как-то маловато. Хотя может не в попугаях счастье?
Устройство полуживое, при загрузке usb модулей просто вешается. Версия броадкомовской части 5.10.56.3, сорцов у меня нет.