No way. JTAG pins are not wired out of BGA chip.
I'm wonder, where you've got pinout?
someone knows how to connect JTAG to the board?
I found this for BCM4704:
Last edited by Omega; 10-06-2013 at 21:27. Reason: fixed
No way. JTAG pins are not wired out of BGA chip.
I'm wonder, where you've got pinout?
I'm not sure... My router is bricked... When I turn on the four leds LAN1,lan2,lan3,lan4 are turn on and the others turn off... The pc not recognize the LAN port of the router.... no ping...
I had hoped to make it work
Any idea??
can I change firmware using serial port of router?
I change the power device from my dlink2100 and the asus works same...
I know that wl-500w doesn't have jtag connector on board. But I was wondering if there is some way to figure out where to connect jtag.
I've found this topic on dd-wrt forum http://www.dd-wrt.com/phpBB2/viewtopic.php?t=16530
Does anyone has a CE report for wl-500w. There is one for wl-500gp.http://wl500g.info/showthread.php?p=56699