Reply With QuoteOk! I think i got the hang on VI so as soon as I get home I will try this. But I've got another stupid question first should both lines be in the post-boot file?Originally Posted by Oleg
Junior Member
Ok! So I wasn't able to compleate the testings yesterday I got stuck on how to use vi to create the post-boot file but I'm going to readup on my vi skills during the day and have another go tonight. But thank U Oleg for the help I'm sure it will work now. I will post the results.
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Junior Member
Ok! I think i got the hang on VI so as soon as I get home I will try this. But I've got another stupid question first should both lines be in the post-boot file?
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Administrator
yes, both lines and remember to chmod it.
Junior Member
Thanx
I also need to do
Right?Code:flashfs save flashfs commit flashfs enable
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Administrator
yes, as stated on my page.
Administrator
please try this firmware it should work with wpa-psk out of the box.
Junior Member
Thanx for youre excelent support Oleg. I got the post-boot script to work now.
I'm very greatfull
Does that new firmware work on my wl300g it says WL500G in the file name!? If you say that it works i will try it
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Administrator
Ok, wl300g firmware.
Junior Member
Thanx again Oleg the new firmware is now on and everithing is working out-of-the-box.
What would I do if it wasn't for people like you! Keep up the good work!!
OLEG YOU ROCK!!!!!!!
Next up kai-station............do you think it's possible on a wl300g???........ but that will be another thread
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Junior Member
I've got also the latest OLEG firmware, but when i set the 2 x 300G boxes to WDS (Bridge) i get a lot of time-outs when i sent a big package (ping -t -l 25000 192.168.168.5) 10xis good then 1xtimeout and so on.
The Asus firmware 1.8.1.9 works better in brdige..
Tried almost every setting of channel and power.
No WEP or whatsoever (only MAC filter)
Please help!
Junior Member
I don't realy know what you are asking. In my configuration I do not use WDS. My belkin pre-n is connected to internet and set up as a homegw with firewall. My asus 300g is set up as ap in bridgemode. All wireless devices connects to the belkin.
My ASUS setup
[xbox] <-crossovercabel-> <[ASUSWL300G]> ((((wifi)))) <[BelkinPRE-N]> <-networkcabel-> {internet ADSL2+}
Posting Permissions