New oleg firmware version

[lly]

Hey, I found out this morning that r273 has a non working webcam

r264 patch was blind, since I haven't appropriate hardware
If your webcam don't work in r273 at all, seems to be uhci/ohci drivers requires urb->next, but ehci can't work with it This situation already resolved in 2.6 kernels, and I should to look into drivers code, but it may consume much time. As fast solution I can revert r264 patch only.

About

usb.c: unable to get device descriptor (error=-32) 

or -EPIPE error code - I can only suggest remote debugging, since this error never be observed myself since 232-usb-hub11.patch applied.
i.e. I build debug firmware - you runs it and send back to me debug messages. If it is acceptable for you - drop me private message.

[sebw]

I have my quickcam 4000 working well via USB 2.0 direct into my WL500gx with F/W r264.

I think wpte is having problem using the webcam via a hub, which is the known issue number ID 23:

http://code.google.com/p/wl500g/issu...mmary%20Opened

Edit.
Just realised that I may not have updated my /opt/lib/modules/2.4.37 when I upgraded to r264.
I will need to check and confirm this tonight

[lly]

I have my quickcam 4000 working well via USB 2.0 direct into my WL500gx with F/W r264.

When you plug webcam direct in router - it communicates via UHCI driver. When you connect it via USB 2.0 hub - then EHCI driver communicates with hub+device and perform all transfers.

Anyway, thank you for positive report.

I think wpte is having problem using the webcam via a hub, which is the known issue number ID 23:

No, this issue refers to -ENOSPC (-28) error, wpte's code is -EPIPE (-32) - i.e. stalled device. Possible, timings/timeouts issue.

[AshDyk]

I'm new here, and also quite new to this router. I succesfully installed Oleg's firmware (version 1.9.2.7-10).

Printing works perfect, but I can't get filesharing working. I installed dropbear, can make a connection, but when I try fdisk /dev/discs/disc0/disc (got it from the first start tutorial), it says it can't open it.

Do I need some special hardware for my harddisk, I currently have a "Wintech", with a Jimicron chipset (typenumber EX-MOB-45).

Can somebody help me out?

[sebw]

I have my quickcam 4000 working well via USB 2.0 direct into my WL500gx with F/W r264.

I must confess that I have mislead you lly. I have just recompiled r264 and made sure that I copied the r264 modules to "/opt/lib/modules". Using modprobe to install pwc and pwcx I had a non-working webcam. I then compiled r263 and copied the modules to "/opt/lib/modules" and the webcam worked once again.

[lly]

I must confess that I have mislead you lly.

try r282 - it should fix problem.

[sebw]

I have installed r282 and transferred lib/modules and the webcam is good.
Thanks lly

[mimiko]

Hello
Can you tell me please where I can download the r282?
Thank you

[theMIROn]

Hello
Can you tell me please where I can download the r282?
Thank you

The only way yet is to build it by yourself (http://code.google.com/p/wl500g/wiki...tomFirmware_en)

[nexstar]

ipkg error

ipkg.sh update
mkdir: cannot create directory '//opt/tmp/': Read-only file system





Can you please add an option to mask/unmask password fields

[akacosti]

show output of:

dmesg | grep printer 

enter command either by telnet/ssh or here http://192.168.1.1/Main_AdmStatus_Content.asp

and also output of

ps 

is it usb1 printer?

for the command

ps 

PID USER VSZ STAT COMMAND
1 admin 2472 S /sbin/init
2 admin 0 SW [keventd]
3 admin 0 RWN [ksoftirqd_CPU0]
4 admin 0 SW [kswapd]
5 admin 0 SW [bdflush]
6 admin 0 SW [kupdated]
7 admin 0 SW [mtdblockd]
54 admin 2092 S telnetd
59 admin 2092 S httpd vlan1
60 admin 2092 S syslogd -m 0 -O /tmp/syslog.log -S -l 7
62 admin 2092 S klogd
65 admin 1836 S nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
69 nobody 1184 S dnsmasq
70 admin 0 SW [khubd]
77 admin 1140 S lpd
79 admin 1028 S p9100d -f /dev/usb/lp0 0
82 admin 2464 S waveservermain
84 admin 2464 S rcamdmain
97 admin 1652 S infosvr br0
98 admin 2468 S watchdog
100 admin 2028 S upnp -D -L br0 -W vlan1
101 admin 2464 S ntp
143 admin 2096 S sh -c ps > /tmp/syscmd.log 2>&1
144 admin 2092 R ps

and for

dmesg | grep printer 

printer.c: v0.13: USB Printer Device Class driver
can u help me with a discussion?10x in advance

[zexe]

hi,
I upgraded to WL500W-1.9.2.7-d-r308.trx and now transmission is not working and ipkg update/upgrade as well. Any help?

[lly]

hi,
I upgraded to WL500W-1.9.2.7-d-r308.trx and now transmission is not working and ipkg update/upgrade as well. Any help?

You (like most users) didn't provide necessary info:

• From which firmware you upgraded
• Logs of "broken" ipkg

I don't know about transmission, but ipkg operability confirmed by most customers.

[poiu]

I install r308 yesterday, everything work ok, ipkg too.
WL500GP.
I use rtorrent instead Transmission.

[theMIROn]

I install r308 yesterday, everything work ok, ipkg too.
WL500GP.
I use rtorrent instead Transmission.

thnx for the good report