New oleg firmware version

[theMIROn]

Okie, it's too-quick-reading fault
Anyway, have to notice that there're pre-stable builds of 1.9.2.7-d at the same ftp link posted above to try out.

[preacher@wl500g]

Will the USB speed increase if I install the firmware WL500W-1.9.2.7-d-r1222 on my Asus WL-500gp (version 1)?

At the moment I am running Olegs 1.9.2.7-10

USB speed when transfering files is not improved.
But when accessing storage via samba it is much more faster. Oleg needs always some seconds for refresh on directory change, but no wait with this firmware.

[preacher@wl500g]

Hi
wanted to ask if this firmware supports USB modems (3G/CDMA/Evdo etc)?

You can use kollel firmware in the meanwhile:
http://koppel.cz/cdmawifi/download/171/
as good as the old oleg but with UMTS support via USB.

[shantanugoel]

From the box, using web-UI only - no. By custom shell scripts - yes.

You can take a look to mango mods 3G disapear threads, but nobody decide to help mangodan to improve solution.

thanks lly.. shell scripts is fine with me.. Will try out the threads you mentioned

[lly]

Due to space reason (currently we blocked to add new features for routers with 4Mb flash), we have plans to drop support ActiveX support on builtin webcam support page (IE only). Ordinary webcam image refresh method we will leave as is.

P.S. As result, we can free up to 18Kb in firmware image.

[wpte]

Due to space reason (currently we blocked to add new features for routers with 4Mb flash), we have plans to drop support ActiveX support on builtin webcam support page (IE only). Ordinary webcam image refresh method we will leave as is.

P.S. As result, we can free up to 18Kb in firmware image.

including the ActiveX stream I guess?
18kb is quite a good clean-up imo

ActiveX is also supposed to work on firefox btw

[lly]

including the ActiveX stream I guess?

Yes

ActiveX is also supposed to work on firefox btw

Even on linux?

[wpte]

Even on linux?

nope
instead asus should have programmed a java applet since that is supported by all major operating systems (IcedTea plugin in linux)

anyway... I have a build error at the rt-n branch when doing make for creating the gateway directory.

patching file libusb/os/linux_usbfs.c
Hunk #1 succeeded at 653 (offset 7 lines).
Hunk #2 succeeded at 724 (offset 7 lines).
Hunk #3 succeeded at 739 (offset 7 lines).
mv /opt/broadcom/src/gateway/libusb-1.0.7 /opt/broadcom/src/gateway/libusb10 && touch /opt/broadcom/src/gateway/libusb10
tar -jxf libusb/libusb-compat-0.1.3.tar.bz2 -C /opt/broadcom/src/gateway
[ ! -f libusb/libusb-compat-0.1.3.patch ] || /opt/broadcom/src/rt-n/patch.sh -Z /opt/broadcom/src/gateway/libusb-compat-0.1.3 libusb/libusb-compat-0.1.3.patch
mv /opt/broadcom/src/gateway/libusb-compat-0.1.3 /opt/broadcom/src/gateway/libusb && touch /opt/broadcom/src/gateway/libusb
rm -rf /opt/broadcom/src/gateway/usb-modeswitch-1.1.2 /opt/broadcom/src/gateway/usb_modeswitch
tar -jxf usb_modeswitch/usb-modeswitch-1.1.2.tar.bz2 -C /opt/broadcom/src/gateway
[ -f usb_modeswitch/usb_modeswitch.setup ] && \
cp -pf usb_modeswitch/usb_modeswitch.setup /opt/broadcom/src/gateway/usb-modeswitch-1.1.2/
make: *** [/opt/broadcom/src/gateway/usb_modeswitch] Error 1

The configuration of usb_modeswitch is deleted in r1520... clue?

[lly]

The configuration of usb_modeswitch is deleted in r1520... clue?

Will be fixed ASAP

[theMIROn]

The configuration of usb_modeswitch is deleted in r1520... clue?

r1521 is the clue

[wpte]

r1521 is the clue

hehe
everyone is drunk now and then

I found out that I had to fill in 3 extra things for the new ipv6 config page.

• the dns server
• tunnel mtu
• tunnel ttl

now sixtun shows up
and works as well

[theMIROn]

[*]the dns server

it's kinda optional - just to specify ipv6 dns server if any.
leave it empty, and only your ipv4 dns will be used.

[wpte]

it's kinda optional - just to specify ipv6 dns server if any.
leave it empty, and only your ipv4 dns will be used.

Yes I thought so... but sixtun didn't load without any... in case the MTU and TTL are optional as well

[theMIROn]

in case the MTU and TTL are optional as well

nope, it's required tunnel options

[Kosmotaur]

Hi,
I would like to contribute to Oleg's firmware, yet I don't really know whom to turn to. I tried contacts from the Google Code site where the firmware is hosted, but no one ever replied to my email. Any help, please?
Cheers!