Page 1 of 9 123 ... LastLast
Results 1 to 15 of 131

Thread: transmission the latest the greatest

  1. #1

    transmission the latest the greatest

    Instructions:

    1)skip to step 5 if you updated openssl and libcurl recently.
    2)ipkg update
    3)ipkg install openssl
    4)ipkg install libcurl

    5)download and unzip:

    http://www.4shared.com/dir/35206050/...nsmission.html


    6)copy the ipk file to /opt folder on your asus
    7)edit the file /opt/lib/ipkg/lists/optware
    and remove the lines belonging to transmission

    -ipkg install /opt/transmission_2.11-1_mipsel.ipk (or install the previous compiled version)

    Look here for changes:
    http://trac.transmissionbt.com/timeline?changeset=on
    Last edited by avberk; 22-10-2010 at 15:41.

  2. #2
    Join Date
    Jan 2006
    Location
    Switzerland
    Posts
    16

    What's new ?

    Hey

    Thanks for having the beta packaged !

    From my point of view the real new thing of 1.5 is IPv6 support, is there anything more ?

    I looking for a good torrent client to fill my new HD. I'm not sure which one to choose. I pay attention to the following points :
    • Efficency, should work with the limited capacity of wl-500gx.
    • Configurability, priorities and limits.


    Interface is not important, command line is ok.

    Any advices ?

  3. #3
    Transmission is still under heavy development, but i guess it has the best future.
    http://forum.transmissionbt.com/

    you could also have a look at:

    enhanced-ctorrent
    rtorrent

  4. #4
    Join Date
    Jan 2006
    Location
    Switzerland
    Posts
    16
    Thank you for the feedback,

    I'm currently investigating rtorrent which seems to meet my exact requirements.

  5. #5

    transmission_1.50+r7789_mipsel.ipk

    Hi !! I have installed transmission_1.50+r7789_mipsel.ipk and it was working just fine until I have noticed that after a while ( one hour or so ) the process stops by himself . Any idea why is happening this ?
    Thanks for the great work until now !

  6. #6
    I haven't seen this problem (yet)

    Suggestions:

    Any clues in the logs?
    Disk full?

    Try running transmission in the foreground with the -f switch,
    maybe you will see what happens.

    Did you update openssl and libcurl?

    Try the older version.

  7. #7
    Funny thing. I have deactivated the ppoe relay function and now it is working ....

  8. #8

    zip files corrupted?

    Strangely, every zip archive is corrupted for me. Repeated download and tried with winrar, winzip, 7zip… Avberk, can you check the zip archives please?

  9. #9
    checked. zip file is ok. empty your browsers cache. maybe that helps

  10. #10
    Thank you for quick reply. Cleared IE cache but with same result. As I have allready tried on another PC with same error, I gave a shot with different browser – Opera. As suspected, download is now fine (bloody Microsoft)

  11. #11
    Many thanks for posting the 1.5 version. I installed the 7789 version when it was first posted. Seems to work so much better than 1.4x on my WLHDD. I had a number of partial downloads sitting stalled showing zero peers - they sprang to life once I upgraded to 1.5. The download speeds seem better too.

    One question:
    Quote Originally Posted by avberk View Post
    Added transmission build 7891.

    Long awaited 'seed till ratio is reached' is also included!!!
    (tested. works!)

    seed time till ratio is reached is included, but i don't think it works.
    I can't see this 'Seed til ratio' setting in the web interface. Is there a string I need to add to the settings.json file?
    Thanks.

  12. #12
    have anyone the latest build from site.. http://trac.transmissionbt.com/timeline ??

  13. #13
    Quote Originally Posted by Noeyedeer View Post
    Many thanks for posting the 1.5 version. I installed the 7789 version when it was first posted. Seems to work so much better than 1.4x on my WLHDD. I had a number of partial downloads sitting stalled showing zero peers - they sprang to life once I upgraded to 1.5. The download speeds seem better too.

    One question:

    I can't see this 'Seed til ratio' setting in the web interface. Is there a string I need to add to the settings.json file?
    Thanks.
    in settings.json you must have

    "ratio-limit": "2.000000",
    "ratio-limit-enabled": 1,


    R.

  14. #14
    Quote Originally Posted by RolF2 View Post
    in settings.json you must have

    "ratio-limit": "2.000000",
    "ratio-limit-enabled": 1,


    R.
    Got it, Thank you.
    Marty.

  15. #15
    Any chance you could post the new 1.51 release They mention potential CPU savings.

Page 1 of 9 123 ... LastLast

Similar Threads

  1. WL-500gp and Transmission
    By happymeal in forum WL-500gP Q&A
    Replies: 55
    Last Post: 27-08-2008, 19:46
  2. Understanding and debugging Transmission [oleo?]
    By wengi in forum WL-500gP Q&A
    Replies: 66
    Last Post: 05-08-2007, 10:36

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •