I'm talking of physical interfaces, not their logical names.Originally Posted by majx
This is a separate part with closed sources.Flashing FW with a recompiled one...do you recompile/flash that bootloader too or is it a seperate sw?
Do you mean, turning on the box -> you have at least eth0-2?Originally Posted by Oleg
And an unconfigured WAN-IF and br0 (until config read from nvram)?
Flashing FW with a recompiled one...do you recompile/flash that bootloader too or is it a seperate sw?
I'm talking of physical interfaces, not their logical names.Originally Posted by majx
This is a separate part with closed sources.Flashing FW with a recompiled one...do you recompile/flash that bootloader too or is it a seperate sw?
But in general it's a linuxOriginally Posted by Oleg
in this case with existing boot-line-up ->
bootloader starts kernel & init (and rc-scripts) witch are all hardcoded as c-src. changing that srs-es to disable all NIC-hw until boot suceeds and then enabling it would make it at least a bit more secure...
The time spent in the bootloader and loading kernel is enough to break the things. I do not want to "workaround" bootloader bugs, they should be fixed by ASUS and existing units should be replaced/upgraded or whatever.Originally Posted by majx
Bad news
The wl500g deluxe is just available in france today since a few hours http://www.materiel.net/details_WL-500gDeluxe.html
I was buying one unit when I have decided to check the latest news on the forum
Oleg have you got any answer from asus about this problem ?
Last edited by msp; 14-02-2005 at 19:12.
Well, I've submitted this to Asus Russia Tech Support, but have not got any answer yet.Originally Posted by msp
Also, if you use pppoe connection, then this issue should not affect you too much.
Any news from Asus on this issue?
Oleg, you mentioned that there is no JTAG port on the 500gx. Do you know where to find the JTAG connections, so that one can "add" a JTAG port to the device?
Is it possible to flash the bootloader for end users, or must Asus replace the hole unit to change/upgrade the bootloader?
According to ASUS Russia, ASUS contacted Broadcom on this issue.Originally Posted by lexi
Nope. I've no idea.Oleg, you mentioned that there is no JTAG port on the 500gx. Do you know where to find the JTAG connections, so that one can "add" a JTAG port to the device?
Yes, this is possible, but requires small modification to firmware to allow writing to this area.Is it possible to flash the bootloader for end users, or must Asus replace the hole unit to change/upgrade the bootloader?
hi to all,
I bought a WL-500g Deluxe and due to a problem with FTP server configuration I found this site. I have read Oleg's warning and I'm worried. I would have to give it back? Oleg says that Asus sent an update to him that it fixes the problems but is possible to update bootloader only via software? When it will be available for all?
Last edited by hEiFoN; 06-03-2005 at 02:00.
Just wait. I need some time to prepare update. But most likely you're not affected at all.
Thanks Oleg, may be that you haven't understood me because I didn't explain it very well (I have bad English ). I tried to say that I have two days to return the WL-500gx to shop and I would like to know what is better option (in security themes):
- To change the WL-500gx to WL-500g
- Not to return it and to update bootloader.
And only one more question: Why Asus don't release update officially?
Thanks a lot.
Best Regards.
This one.Originally Posted by hEiFoN
I've no idea.And only one more question: Why Asus don't release update officially?
In my NIC stands also Gateway and DNS on 192.16.1.1 must that remove? My cable modem must also remove? Do the bootloader have with utility Eng_1380 done?To upgrade your unit you will need a PC with one ethernet adapter only, so if you've more than one adapter (including wireless, ieee1394 or whatever) please disable it. You need to configure your adapter with manual IP. Consider using 192.168.1.2 as an IP address and an IP mask of 255.255.255.0. Once you've configured your adapter follow next step
Gerard
Oleg says:
But how to know wether it is RETAIL or non-RETAIL unit?DO NOT TRY TO USE THIS SOFTWARE WITH THE UNITS OTHER THAN WL-500g Deluxe RETAIL UNITS.
I have just ordered one hier - https://www3.alternate.de/html/shop/...r&Level3=#Asus (and it seems that only wl-500g is retail, but not the DELUXE unit).
Thanks.
where are you quoting this from?Originally Posted by kiewer
anyway WL500g Deluxe = retail when it is delivered in a box, also never seen OEM WL500g's/DeluxesDO NOT TRY TO USE THIS SOFTWARE WITH THE UNITS OTHER THAN WL-500g Deluxe RETAIL UNITS.
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO