You do not need full flash. Just reflash cfe.bin (and check that flashed image is identical to file) and erase nvram.
Registered User
OK gang, I've been beating my head up on this for about 10 days now. I successfully got the CFE upgraded, but then couldn't get it to flash from the net (it would take the tftp image, but never seemed to flash it). many tries later, I've succeeded in fully bricking it (I think erasing the WHOLEFLASH.BIN was probably not a good idea). I get all four LAN lights green for ~2 sec on boot, then only a cable connected LAN light. No power lights at all.
I plan on rebuilding my cable thinking that it's flaked out somehow (it concerns me that backing up the CFE.BIN doesn't give me the same data as the CFE.BIN that I flashed). But in the mean time, anyone want to let me download a WHOLEFLASH.BIN backup? That would give me the option of rebuilding the whole thing with a known state (albeit that it would surely take ~12 hours to do so)....
Any other suggestions?
thanks again gang, while I'm stuck I am enjoying the challenge anyway.
-tv
narwhalDC @t gmail d.ot com
Administrator
You do not need full flash. Just reflash cfe.bin (and check that flashed image is identical to file) and erase nvram.
Junior Member
I'm having a problem getting my DYNDNS Custom DNS host to update it's IP using Oleg's WL500g-1.9.2.7-6b.trx
In the logs, I get:
Jul 10 22:07:00 ddns update: connected to members.dyndns.org (63.208.196.94) on port 80.
Jul 10 22:07:00 ddns update: invalid hostname: myhostnamegoeshere.com
Is this supposed to work? I can get it to update no problem with $vea$oft's Talisman on a Linksys router.
EDIT:
I telneted to the box and used ez-ipupdate (which is what I assume is used for the DDNS updates), and can update my ip without problems:
Jul 10 23:31:06 ddns update: connected to members.dyndns.org (63.208.196.94) on port 80.
Jul 10 23:31:07 ddns update: request successful
Does anyone know what calls ez-ipupdate in the firmware? There must be a bug in there somewhere.
Last edited by pcbroch; 11-07-2005 at 04:44.
Junior Member
Hi
I would set it up in the webinterface(IP-config/miscellaneous).
Lookat the attachment to see my config.
ACluk90
Junior Member
First, you are using DynDNS and I'm using DynDNS CUSTOM.Originally Posted by ACluk90
Hi
I would set it up in the webinterface(IP-config/miscellaneous).
Look
ACluk90
I know how to and WOULD set it up from the web interface if it worked. But the reason I'm trying to do it manually is that it is not working from the web interface. I'm trying to figure out how the web interface translates into actual commands, so I can find what broken and get it fixed.
FYI, there another person with the same problem:
http://wl500g.info/showthread.php?t=2461
Administrator
How ez-update should be called for custom dns? I will then check rc sources...
Junior Member
I suspect it's a problem with the service-type. But I can update manually by typing:
ez-ipupdate -S dyndns-custom -u user:password -h mydomain.com -i the_pppoe_interface
Junior Member
Any luck with this Oleg? (Or simply not the time to look at it?).
This is the only thing missing for my perfect setup!
Worst case PM me the source, I'll have a look.
Administrator
Sorry, I had no time to check this yet.
Administrator
Ok, found it. Both static and custom was broken.
Fixed now.
Junior Member
Where? where?? ;-)
Oleg, you rock!
Administrator
Which unit you're using? wl500g or deluxe?
Junior Member
MN700 actually...
Administrator
ok, wl500g then.MN700 actually...I will try to prepare test version for you.
Junior Member
Where do I send the check?ok, wl500g then.
