Firmware v1.9.2.7 CR3c [Oleg]

**Wesleyrpg** · 19-02-2005, 02:03

More info for you.......no reponse from net....so i manually disconnected and reconnected....heres a log

Jan 1 11:00:13 bpalogin[102]: BPALogin v2.0.2 - portable BigPond Broadband login client
Jan 1 11:00:13 kernel: neg fail
Jan 1 11:00:16 bpalogin[102]: Cant connect to auth server - No route to host
Jan 1 11:00:16 bpalogin[102]: Sleeping for 60 seconds
Jan 1 11:00:22 udhcpc[101]: Received DHCP NAK
Jan 1 11:00:22 dnsmasq[51]: read /etc/hosts - 4 addresses
Jan 1 11:00:22 dnsmasq[51]: reading /tmp/resolv.conf
Jan 1 11:00:22 dnsmasq[51]: using nameserver 61.9.128.15#53
Jan 1 11:00:22 bpalogin[102]: Error connecting logout auth socket - Network is unreachable
Jan 1 11:00:22 dhcp client: nak: lease is lost
Jan 1 11:00:22 ddns update: error connecting to members.dyndns.org:80
Jan 1 11:00:22 dnsmasq[51]: read /etc/hosts - 4 addresses
Jan 1 11:00:22 dnsmasq[51]: reading /tmp/resolv.conf
Jan 1 11:00:22 dnsmasq[51]: using nameserver 61.9.128.15#53
Jan 1 11:00:23 dhcp client: deconfig: lease is lost
Jan 1 11:00:26 udhcpc[101]: Entering released state
Jan 1 11:00:56 wan: connected manually
Jan 1 11:00:56 udhcpc[101]: Performing a DHCP renew
Jan 1 11:00:58 udhcpc[101]: Lease of 144.132.41.152 obtained, lease time 20925
Jan 1 11:00:58 dnsmasq[51]: read /etc/hosts - 4 addresses
Jan 1 11:00:58 dnsmasq[51]: reading /tmp/resolv.conf
Jan 1 11:00:58 dnsmasq[51]: using nameserver 61.9.192.15#53
Jan 1 11:00:58 dnsmasq[51]: using nameserver 61.9.128.14#53
Jan 1 11:00:58 dnsmasq[51]: using nameserver 61.9.128.15#53
Jan 1 11:00:59 ddns update: no update needed at this time
Feb 19 12:27:20 bpalogin[136]: BPALogin v2.0.2 - portable BigPond Broadband login client
Feb 19 12:27:20 dhcp client: bound IP : 144.132.41.152 from 144.132.40.1
Feb 19 12:27:29 ntp client: Synchronizing time with time.nist.gov ...
Feb 19 12:28:05 login[145]: root login on `pts/0'
Feb 19 12:45:04 login[148]: root login on `pts/0'
Feb 19 12:54:13 wan: disconnected manually
Feb 19 12:54:13 udhcpc[101]: Unicasting a release of 144.132.41.152 to 172.18.17.80
Feb 19 12:54:13 dnsmasq[51]: read /etc/hosts - 4 addresses
Feb 19 12:54:13 dnsmasq[51]: reading /tmp/resolv.conf
Feb 19 12:54:13 dnsmasq[51]: using nameserver 61.9.128.15#53
Feb 19 12:54:13 bpalogin[136]: Error connecting logout auth socket - Network is unreachable
Feb 19 12:54:13 dhcp client: deconfig: lease is lost
Feb 19 12:54:13 udhcpc[101]: Entering released state
Feb 19 12:54:13 udhcpc[101]: Entering released state
Feb 19 12:54:16 wan: connected manually
Feb 19 12:54:16 udhcpc[101]: Performing a DHCP renew
Feb 19 12:54:19 udhcpc[101]: Lease of 144.132.41.152 obtained, lease time 3600
Feb 19 12:54:19 dnsmasq[51]: read /etc/hosts - 4 addresses
Feb 19 12:54:19 dnsmasq[51]: reading /tmp/resolv.conf
Feb 19 12:54:19 dnsmasq[51]: using nameserver 61.9.192.15#53
Feb 19 12:54:19 dnsmasq[51]: using nameserver 61.9.128.14#53
Feb 19 12:54:19 dnsmasq[51]: using nameserver 61.9.128.15#53
Feb 19 12:54:19 ddns update: no update needed at this time
Feb 19 12:54:20 dhcp client: bound IP : 144.132.41.152 from 144.132.40.1
Feb 19 12:54:20 bpalogin[171]: BPALogin v2.0.2 - portable BigPond Broadband login client

Good luck

Adam

**Oleg** · 19-02-2005, 09:29

Check your PM.

**AlexSuslov** · 20-02-2005, 08:50

Device: WLHDD
Firmware: 1.9.2.7-3c
Problem: No ftp

[admin@wl-hdd /]$ lsmod
Module Size Used by
usb-storage 62144 0 (unused)
sd_mod 13268 0 (unused)
scsi_mod 70176 1 [usb-storage sd_mod]
videodev 8304 0 (unused)
audio 50120 0 (unused)
soundcore 5280 0 [audio]
printer 12620 0 (unused)
usb-ohci 21764 0 (unused)
usbcore 77224 1 [usb-storage audio printer usb-ohci]
ipt_NETMAP 992 2
ip_nat_starcraft 2224 0 (unused)
wl 418352 0 (unused)
et 26976 0 (unused)
ide-disk 13524 0
ide-probe-mod 11468 0
ide-mod 109568 0 [ide-disk ide-probe-mod]

[admin@wl-hdd /]$ mount
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)

Syslog part:
Jan 1 03:00:02 kernel: hda: IC25N040ATMR04-0, ATA DISK drive

I see hard disk not mount, but it present

What i must to do?
Alex

**Oleg** · 20-02-2005, 19:08

Originally Posted by AlexSuslov

Device: WLHDD
Firmware: 1.9.2.7-3c
Problem: No ftp

Alex, the problem is that my firmware does not mount your harddisk automatically, you will need to do it yourself using the post-boot script. The easiest way is to add these lines to it:

Code:

#!/bin/sh
nvram set usb_storage_device=1

This should trigger mounting your drive in 10 seconds and launching ftp/samba.

**Wesleyrpg** · 22-02-2005, 13:02

What does the router do with OOB (Out of Band) packets?

I'm having problems getting any punkbuster game to work. I have tried router with and without firewall turned on? Does it ignore OOB's?

Thanks

Adam

**kiboko** · 22-02-2005, 17:59

HI.

I have a problem with the router and the printer(hp deskjet 5652). In the past two days in the system log I get this info

Code:

Feb 22 16:03:55 kernel: lp_wait_ready timeout
Feb 22 16:03:55 kernel: lp_write timeout
Feb 22 16:04:00 kernel: lp_wait_ready timeout
Feb 22 16:04:00 kernel: lp_write timeout
Feb 22 16:04:05 kernel: lp_wait_ready timeout
Feb 22 16:04:05 kernel: lp_write timeout
Feb 22 16:04:10 kernel: lp_wait_ready timeout
Feb 22 16:04:10 kernel: lp_write timeout
Feb 22 16:04:15 kernel: lp_wait_ready timeout
Feb 22 16:04:15 kernel: lp_write timeout
Feb 22 16:04:20 kernel: lp_wait_ready timeout
Feb 22 16:04:20 kernel: lp_write timeout
Feb 22 16:04:25 kernel: lp_wait_ready timeout
Feb 22 16:04:25 kernel: lp_write timeout
Feb 22 16:04:30 kernel: lp_wait_ready timeout
Feb 22 16:04:30 kernel: lp_write timeout

When I turn on the printer she prints the latest printed document. It's in Raw port 9100, USB.
I've readed a similar problem in the previous fw version.
Any news about this?

My fw is 1.9.2.7-cr3c with wpa-psk my wan(2 asus and 1 toshiba) and lan has 3 laptops

and 2 desktops.

Thanks.

**Oleg** · 22-02-2005, 18:06

Originally Posted by kiboko

HI.

I have a problem with the router and the printer(hp deskjet 5652). In the past two days in the system log I get this info

According to your log you are trying to print via parallel port using either port 9101 or LPR.

**kiboko** · 22-02-2005, 21:24

the printer is connected by usb, port 9100 in both asus laptops. No other laptop or desktop uses the printer.

**kiboko** · 23-02-2005, 14:46

Problem solved. A friend of mine who also has a wl-500g and has configured his printer in parallel mode has come to my house with his laptop. I believe that was the reason why the router act like this. I've restarted the router and now everything is ok.
thanks.

**freestuff** · 23-02-2005, 21:49

I Have a strange problem, I have to reset my AP sometimes. When I look with Netstumbler to my AP I see the following:

Does anyone have seen this before?

**Oleg** · 23-02-2005, 21:56

Originally Posted by freestuff

I Have a strange problem, I have to reset my AP sometimes. When I look with Netstumbler to my AP I see the following:
Does anyone have seen this before?

Well, looks like corrupted packets. Also, the receive signal is too strong - -28dB - have you changed output power somehow or attached external antenna?

**KO(c)Tik** · 23-02-2005, 22:14

Device: WL500g
Firmware: 1.9.2.7 CR3c
Problem: MPPE required, but kernel has no support :-(

I try to connect to ISP over VPN connection.

My options.pptp file:
-----------------------------------------
lock
noauth
nobsdcomp
nodeflate
require-mppe
-----------------------------------------

My peer file:
-----------------------------------------
name myname
remotename PPTP
ipparam quadra
file /etc/ppp/options.pptp
-----------------------------------------

Files pap-secret and chap-secret exists and are correct.

Adn I start my connection with command
pppd pty 'pptp 10.4.0.254 --nolaunchpppd' call quadra updetach

This that I see:
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Warning - secret file /tmp/ppp/chap-secrets has world and/or group access
MPPE required, but kernel has no support.
Connection terminated.
:-(((

This string is from kernel log:
Jan 1 03:00:03 kernel: MPPE/MPPC encryption/compression module registered

Sorry for my bad English :-(

**Oleg** · 23-02-2005, 22:27

Originally Posted by KO(c)Tik

This that I see:
Using interface ppp0
Connect: ppp0 <--> /dev/pts/1
Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Warning - secret file /tmp/ppp/chap-secrets has world and/or group access
MPPE required, but kernel has no support.
Connection terminated.
:-(((

This is not an 1.9.2.7-3c log - either you've not upgraded firmware, or it does not belong to wl500g at all. Is this peer (server) log?
1.9.2.7-3c supports MPPE/MPPC out of the box, no manual actions required at all - just select PPTP.

**KO(c)Tik** · 23-02-2005, 23:30

Originally Posted by Oleg

This is not an 1.9.2.7-3c log - either you've not upgraded firmware, or it does not belong to wl500g at all. Is this peer (server) log?
1.9.2.7-3c supports MPPE/MPPC out of the box, no manual actions required at all - just select PPTP.

Sorry, can i speek russian with you? My english is to poore to discribe all my manipulations with this device

But i can say with 100%, that firmware is 1.9.2.7-3c. This text is not a log, this is what i see on my display, when i try to connect to my VPN server by executing the following command.
pppd pty 'pptp 10.4.0.254 --nolaunchpppd' call quadra updetach

In /tmp/syslog.log I find the following lines:
-----------------------------------------------------
Jan 1 03:11:20 pppd[280]: pppd 2.4.2 started by admin, uid 0
Jan 1 03:11:20 pppd[280]: Using interface ppp0
Jan 1 03:11:20 pppd[280]: Connect: ppp0 <--> /dev/pts/1
Jan 1 03:11:20 pptp[283]: anon log[main

ptp.c:243]: The synchronous pptp option is NOT activated
Jan 1 03:11:20 pptp[285]: anon log[ctrlp_rep

ptp_ctrl.c:243]: Sent control packet type is 1 'Start-Control-Connection-Request'
Jan 1 03:11:20 pptp[285]: anon log[ctrlp_disp

ptp_ctrl.c:721]: Received Start Control Connection Reply
Jan 1 03:11:20 pptp[285]: anon log[ctrlp_disp

ptp_ctrl.c:755]: Client connection established.
Jan 1 03:11:21 pppd[280]: Warning - secret file /tmp/ppp/pap-secrets has world and/or group access
Jan 1 03:11:21 pptp[285]: anon log[ctrlp_rep

ptp_ctrl.c:243]: Sent control packet type is 7 'Outgoing-Call-Request'
Jan 1 03:11:21 pptp[285]: anon log[ctrlp_disp

ptp_ctrl.c:841]: Received Outgoing Call Reply.
Jan 1 03:11:21 pppd[280]: Warning - secret file /tmp/ppp/chap-secrets has world and/or group access
Jan 1 03:11:21 pptp[285]: anon log[ctrlp_disp

ptp_ctrl.c:880]: Outgoing call established (call ID 0, peer's call ID 4480).
Jan 1 03:11:21 pppd[280]: MPPE required, but kernel has no support.
Jan 1 03:11:21 pppd[280]: Connection terminated.
Jan 1 03:11:21 pptp[283]: anon warn[decaps_hdlc

ptp_gre.c:197]: short read (-1): Input/output error
Jan 1 03:11:21 pptp[283]: anon warn[decaps_hdlc

ptp_gre.c:209]: pppd may have shutdown, see pppd log
Jan 1 03:11:21 pppd[280]: Exit.
Jan 1 03:11:21 pptp[285]: anon log[callmgr_main

ptp_callmgr.c:228]: Closing connection
Jan 1 03:11:21 pptp[285]: anon log[ctrlp_rep

ptp_ctrl.c:243]: Sent control packet type is 12 'Call-Clear-Request'
Jan 1 03:11:21 pptp[285]: anon log[pptp_read_some

ptp_ctrl.c:525]: read returned zero, peer has closed
Jan 1 03:11:21 pptp[285]: anon log[call_callback

ptp_callmgr.c:77]: Closing connection
------------------------------------------------------

**Oleg** · 24-02-2005, 08:02

Originally Posted by KO(c)Tik

Sorry, can i speek russian with you? My english is to poore to discribe all my manipulations with this device

Sure, use private messages.

Thread: Firmware v1.9.2.7 CR3c [Oleg]

Thread Tools

Display

How start ftp server on WL-HDD?

Problem with pptp

Similar Threads

Firewall not working on 1.9.2.7 CR3c?

Wl-HDD reseted nvram on 1.9.3.7 CR3c

Firmware v1.7.5.6 CR3 [Oleg]

Firmware v1.7.5.6 CR4 [Oleg]

Firmware v1.7.5.6 CR2.1 [Oleg]

Posting Permissions