Can copy the file now but it wont work
./cueib
-sh: ./cueib: Permission denied
can you please make a small step by step reply
(wich files to get and commands to run)
Thxz for the help
Hello Bugmenot.
you will get the file on your asus the same as you normally would copy files to the asus.
download with your pc and copy to the asus share.
or lookup the url, start a ssh-session on the asus.
go to the right folder where you would want the file to download and issue the wget <url> command.
hth
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
Can copy the file now but it wont work
./cueib
-sh: ./cueib: Permission denied
can you please make a small step by step reply
(wich files to get and commands to run)
Thxz for the help
read the thread and answers, I couldn't get cueib to work either and have compiled another file, it's attached, along with example.
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
(To raas: Makkelijker voor mij als je het in het Nederlands typt Anders een Nederlandse topic hierover starten?)
Last edited by bugmenot; 31-05-2009 at 21:44.
to bugmenot.
zoals ik zei, ik kreeg cueib ook niet aan het werk dus daar kan ik je niet mee helpen. ik gebruik zelf K8055.zip welke een stukje terug in deze thread staat.
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
Heb de twee bestanden gekopiert naar mun root dat is de enige plek waar ik ze heen kan downloaden.
[admin@(none) root]$ ls
ScriptK8055 cueib k8055
[admin@(none) root]$ ./scriptK8055
-sh: ./scriptK8055: not found
[admin@(none) root]$ cd /opt
[admin@(none) /opt]$ mk velleman
-sh: mk: not found
[admin@(none) /opt]$ mkdir velleman
mkdir: Cannot create directory `velleman': Read-only file system
[admin@(none) /opt]$
er gaat iets fout.. hij is read only..
Je /opt is niet gemount.
Heb je een harddisk of usb-drive aangesloten?
kijk eens met het 'df' commando waar je harddisk gemount is.
welke firmware draai je?
Het probleem zit 'm niet in de scripts of libraries, maar dat je de bestanden niet op je asus krijgt.
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
Ik heb een WL500G met een LPT en USB poort dus ik kan maar 1 USB apparaat tegelijk aan sluiten. De USB-hubjes die ik heb werken niet direct en het lijkt erop dat het dus nogteeds niet gaat werken.
Of kan ik de 2 files ook in een specifieke map op de wl500g zelf plaatsen ?
thxz raas voor je snelle andwoord!
ps(firmware 1.9.2.7-7g)
dan zou je ze in je flash moeten zetten, en dat gaat waarschijnlijk niet werken gezien de beperkte ruimte.
Als je ze wel ergens neer kunt zetten (/bin ofzo) dan dien je een flash, save, commit en reboot te geven.
succes.
WL500g Premium v1 Oleg 1.9.2.7-10 500gb hdd [storage-disk] - 250gb hdd [download-disk]
Transmission HellaNZB mysql php lighttpd myphpadmin samba AIOCP CMSimple AmpJuke ADOS
HeadStart
How to measure Energy consumption
back to english
I have wl-hdd with the latest firmware (1.9.2.7-9).
When I plug the k8055 board I get:
hub.c: new USB device 00:04.0-1, assigned address 2
usb.c: USB device not accepting new address=2 (error=-145)
hub.c: new USB device 00:04.0-1, assigned address 3
usb.c: USB device not accepting new address=3 (error=-145)
I need some kernel module for the k8055 board or what?
You could also try: http://sourceforge.net/projects/k8055d/
I wrote that package some time ago, it provides a /proc interface for up to 4 k8055 boards...
Hie
I am a student at University and I am in my third year for my final year project I am using the Velleman Board K8055 to simlate automation in the cinema. I am running out of time and I am not good with writting programms I was wondering if you could help me.
I want the program to be able to light up the LEDs in the users selected order with 5secs duration.
If possible I want to be able to access the board via IP address.
Basically I want the board to simulate automation that happens within the Cinema. These are automation that should occur
Show Start
Masking Flat
Masking Scope
Lamp On
2D FLAT
2D SCOPE
3D FLAT
3D SCOPE
Dowser Open
Feature Start
Credits
Lamp Off
Dowser Close
Any Kind of help in terms of the code would help I am using Visual Basic because of GUI. Please let me know if you can help me. Thank you