CUPS correct uri must be: socket://ip.ip.ip.ip:9100
and you have to set correct driver's for HP 3600 on OS X computer, neither RAW.
I have a hard time trying to get the asus connected HP 3600 to work through Mac OSX. In XP everything works smooth.
When I look at oleg.wl500g.info I look at the XP config; looks like http://ip.ip.ip.ip:9100/ is the proper address to the printer.
OSX runs CUPS, but I can't get the RAW format to the printer, option flags are not accepted, locally, the HP3600 works like a charm (Uses HP 3000 colorJet driver). When I print, the output is some misformed postscript...
How can I address the WL500gP with RAW printing from OSX CUPS?
Thanks in advance,
Gerrit
CUPS correct uri must be: socket://ip.ip.ip.ip:9100
and you have to set correct driver's for HP 3600 on OS X computer, neither RAW.
Last edited by mavka; 21-08-2008 at 13:13.
Thanks for the reply Mavka,
well, the socket:// works, but now I get the text print instead of graphics. The printer spits out text starting with:
%!PS-Adobe-3.0
%language level: 1
%documentData: Clean7Bit
etc etc
I had the impression RAW would fix this since it's a setting on XP but now I'm stuck.
Grit
Yes, you need to setup printer driver [like in WinXP]:
http://support.apple.com/kb/HT2545?viewlocale=en_US.
I haven't seen Mac, but can you connect to CUPS like: http://localhost:631/?
Then goto Administration > Add printer > Device = AppSocket > socket://x.x.x.x:9100 > and select correct driver.
Also, you can try connect printer via LPR:
http://support.apple.com/kb/HT1800?viewlocale=en_US
queue name used by ASUS - "LPRServer"
Last edited by mavka; 21-08-2008 at 15:17.
I can connect to CUPS with localhost, tried different settings. The socket:// initiates printing, but text only.
I use the oleg firmware, I think the LPRServer is not used anymore. Printer does not react to LPD:// uri
What driver are you select?
Last edited by mavka; 22-08-2008 at 07:01.
Hi Mavka,
I'm glad to say it worked! I had the Apple pre-installed drivers from HP, but installed the hpijs / ghostscript and foomatic drivers from this link:
http://www.linuxfoundation.org/en/Op...g/MacOSX/hpijs
I now use the 3600 ghostscript driver with this url:
socket://ip.ip.ip.ip/?bidi
And no problems anymore.
Thanks a lot for your help! I wouldn't install those OpenPrinting drivers if you hadn't pushed me (because the Apple driver worked perfectly on local USB conection I did not want to swap it at first)
Grit