Results 1 to 4 of 4

Thread: kfurge on usb?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    kfurge on usb?

    Hello, is there a way to put kfurge firmware on a usb flash drive and boot from it?
    I think this could solve all hdd spinup issues very easily...

    The problem is that I saw in the logs is that usb modules are loaded after the HDD is already booted. Any ideas how to deal with it?

    And for the record I am quite experienced with Linux. However I haven't tried to crosscompile anything yet. I hope this won't be needed :-)

  2. #2
    It's possible, but I suspect it would require substantial hacking to the Asus distribution. More time than I'm willing to invest.

    - K.C.

  3. #3
    I'm back :-)
    I've been using asterisk in my asus for sime time and I really want to do something about the disk spinning up, because it is affecting asterisk performance. Sometimes it is really a problem when there is an incoming call and asterisk needs to get some data from the suspended HDD...

    So I came up with this solution

    I have a USB flash drive, the first partition is just a copy of part1/2 on the HDD, the second partition is my /opt directory from KFurge firmware.

    I run the following script at the bottom of /shares/MYSHARE1/opt/etc/rc.local script in case /dev/scsi/*/part2 is present at boot time

    So far it seems to work well, at least events from asterisk don't seem to spin up the HDD, so there are no delays.

    I have a problem with vsftpd however, I can't list the contents of the "shares" directory, but I can reach shares/MYSHARE1/ without problems. I don't know where the problem might be, as I don't understand where all the permissions for vsftpd are saved. Any suggestions?
    Killing and re-running vsftpd won't help.

    One last thing - I have to put the USB stick in the front port, because in the rear it gave me a bunch of I/O errors etc. I don't get it why, perhaps this is caused by a printer which is in the rear too. I suspect that the rear ports are either connected by a hub, or they are slower. Or could the rear port be damaged?

    Code:
    #!/bin/sh
    
    PATH=/opt/bin:/opt/sbin:${PATH}
    LD_LIBRARY_PATH=/opt/lib:${LD_LIBRARY_PATH}
    
    /opt/bin/umount -l /mnt/
    
    mount -o ro /dev/scsi/host1/bus0/target0/lun0/part1 /mnt
    
    mount -o move /proc /mnt/proc
    pivot_root /mnt /mnt/mnt
    mount -o move /mnt/dev /dev
    
    
    mount -o move /mnt/tmp /tmp
    mount -o move /mnt/shares /shares
    mount -o move /mnt/foreign_shares /foreign_shares
    
    
    mkdir /foreign_shares/opt-usb
    mount -t reiserfs /dev/scsi/host1/bus0/target0/lun0/part2 /foreign_shares/opt-usb/
    mount -o bind /foreign_shares/opt-usb/ /opt/
    
    umount -l /mnt/opt
    umount -l /mnt/opt
    umount -l /mnt
    
    cp /shares/MYVOLUME1/opt/var/run/sshd.pid /opt/var/run/sshd.pid
    /opt/etc/init.d/S40sshd
    
    killall asterisk && asterisk
    killall smbd nmbd
    /usr/local/samba/sbin/smbd
    /usr/local/samba/sbin/nmbd
    
    swapoff /dev/md/0
    
    # just for my convenience - after I reboot I usually want to tweak some stuff, so I want to have the USB flash in rw mode for a while
    sh -c "sleep 300s; mount -o remount,ro /dev/scsi/host1/bus0/target0/lun0/part2"&

  4. #4
    Can anyone make a tutorial on this? this seems like something that would really save power and lower the risk of hard-drive failure.

Similar Threads

  1. linuxrc bug? - WL-500g not booting from usb drive with hub
    By daniel632 in forum WL-500g Custom Development
    Replies: 5
    Last Post: 14-03-2012, 16:28
  2. Unstable boot from USB
    By Tamadite in forum WL-500g Q&A
    Replies: 6
    Last Post: 20-08-2008, 16:19
  3. 7.09 + USB + hotplug
    By oilinki in forum WL-700g Q&A
    Replies: 0
    Last Post: 18-11-2007, 13:51
  4. WL500g 2 USB Drucker und ein LPT
    By Trebron in forum German Discussion - Deutsch (DE)
    Replies: 1
    Last Post: 28-01-2006, 00:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •