Page 1 of 11 123 ... LastLast
Results 1 to 15 of 153

Thread: Features or stability???

  1. #1
    Join Date
    May 2004
    Location
    Netherlands
    Posts
    70

    Unhappy Features or stability???

    Hi all,

    I have a big problem with all the latest firmwares, both from ASUS and all the ones that are derived from that.

    I've tried every version that I found here but nothing stoped my problem.

    The problem is that I get random hard-resets of my router. Especially if I run for example web-radio. But it also happens when I'm just surfing. After the reset the logfile is cleared so I can not find the cause of this.

    I use a very basic setup with 2 wire-less laptops and 2 wired pc's. No ftp, no camera, no printer and no audio or something.
    My connection is a PPPoE from Casema/Wanadoo.

    With the older firmwares I never got this problem. (But different ones )

    It looks like that everyone is trying to put more and more fancy features in this router but forget about stability.
    For some features (like the usb-audio) I really think that no-one ever uses it...... (just my opinion)

    Can some-one help me to find a sollution for this stability problem???

    M

  2. #2
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206
    Yes, go back to an older, stable firmware, especially if you don't use any of the advanced features.

    I also have a pretty basic config and I still use 1.6.5.3.

    My router has been up and running for more then four months now.
    Brubber

    WL-500g, WL-138g, WL-160g

  3. #3
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Quote Originally Posted by i-beast-a
    Hi all,

    I have a big problem with all the latest firmwares, both from ASUS and all the ones that are derived from that.

    I've tried every version that I found here but nothing stoped my problem.

    The problem is that I get random hard-resets of my router. Especially if I run for example web-radio. But it also happens when I'm just surfing. After the reset the logfile is cleared so I can not find the cause of this.

    I use a very basic setup with 2 wire-less laptops and 2 wired pc's. No ftp, no camera, no printer and no audio or something.
    My connection is a PPPoE from Casema/Wanadoo.

    With the older firmwares I never got this problem. (But different ones )

    It looks like that everyone is trying to put more and more fancy features in this router but forget about stability.
    For some features (like the usb-audio) I really think that no-one ever uses it...... (just my opinion)

    Can some-one help me to find a sollution for this stability problem???

    M
    That is why we've added "Known bugs in official Asus firmware" topic to te FAQ, trying to ask ASUS to fix them.
    It's very hard to me to solve your problem - it is never happened to me, and I see no reason for it... Previously you've written, that 1.8.1.7 works stable for you. Is this true?

  4. #4
    Join Date
    May 2004
    Location
    Netherlands
    Posts
    70
    yep, I never had these problems with 1.8.1.7

    What has changed that could cause this problem??
    Something with pppoe?

    All versions of the 1.9.X.X series has this problem.

    Can I downgrade to 1.8.1.7. without loosing my settings?

    (Groeten uit Breda)

  5. #5
    Join Date
    Dec 2004
    Location
    the netherlands
    Posts
    155
    Quote Originally Posted by i-beast-a
    Hi all,

    The problem is that I get random hard-resets of my router. Especially if I run for example web-radio. But it also happens when I'm just surfing. After the reset the logfile is cleared so I can not find the cause of this.

    I use a very basic setup with 2 wire-less laptops and 2 wired pc's. No ftp, no camera, no printer and no audio or something.
    My connection is a PPPoE from Casema/Wanadoo.

    With the older firmwares I never got this problem. (But different ones )

    It looks like that everyone is trying to put more and more fancy features in this router but forget about stability.
    For some features (like the usb-audio) I really think that no-one ever uses it...... (just my opinion)

    Can some-one help me to find a sollution for this stability problem???

    M
    This is not true. The customized firmwares that Oleg made are more stable and contain less bugs than the standard ones from Asus.

    Now back to your problem, if the older firmwares don't hard reset, then why do you need the newer ones?

    Try to get back to a stable situation first, and try to figure out which older firmware doesn't cause this problem.

  6. #6
    Join Date
    May 2004
    Location
    Netherlands
    Posts
    70
    @Wiz: I wasn't blaming anyone!!!

    ASUS also introduced a lot of new features.

    The bandwith management is a feature that I want to use. (This is a really good feature for a router!)
    Last edited by i-beast-a; 15-01-2005 at 21:06.

  7. #7
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Quote Originally Posted by i-beast-a
    What has changed that could cause this problem??
    Something with pppoe?
    no, pppoe stayed intact in asus firmwares. Relevant changes are: ethernet and wireless drivers. ethernet driver now includes workaround for wan-die.
    Have you tried to stop using WLAN to reduce the number of affected things?
    Also, have you experienced "WAN port dies" with 1.8.1.7?
    Have you tried 1.8.2.4?

    Can I downgrade to 1.8.1.7. without loosing my settings?
    Sure.

  8. #8
    Join Date
    Oct 2004
    Location
    Portugal
    Posts
    145
    Oleg

    This random reset also happen to me!! Why this happen on some users?
    The WL-500g are more that one version?
    This reset issue are in all of 1.9.2.7 to 1.9.2.7-3b, but not in all other fw. I use 1.8.1.7-3 and work very well...
    Home Page
    Marco Sousa from PORTUGAL
    [ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]

  9. #9
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Quote Originally Posted by int
    This reset issue are in all of 1.9.2.7 to 1.9.2.7-3b, but not in all other fw. I use 1.8.1.7-3 and work very well...
    I'm aware of your problem, but I would like to know more details. Have you tried 1.8.2.4?

  10. #10
    Join Date
    May 2004
    Location
    Netherlands
    Posts
    70
    I will go to 1.8.2.4. tomorrow!

    I'll keep you informed about to progress.....
    Last edited by i-beast-a; 15-01-2005 at 22:21.

  11. #11
    Join Date
    Oct 2004
    Location
    Portugal
    Posts
    145
    Quote Originally Posted by Oleg
    I'm aware of your problem, but I would like to know more details. Have you tried 1.8.2.4?
    The 1.9.2.8 also have the same reset issue.

    I'm go now test fw 1.8.2.4, wait for news. =)
    Last edited by int; 15-01-2005 at 23:07.
    Home Page
    Marco Sousa from PORTUGAL
    [ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]

  12. #12
    Join Date
    Oct 2004
    Location
    Portugal
    Posts
    145
    fw 1.8.2.4
    I have test a lot and work very well to now..
    Home Page
    Marco Sousa from PORTUGAL
    [ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]

  13. #13
    Join Date
    Oct 2004
    Location
    Portugal
    Posts
    145

    Thumbs up

    The reset issue are test and not found in fw 1.8.2.4 BETA.
    Home Page
    Marco Sousa from PORTUGAL
    [ WL-500g - fw: 1.9.2.7-7e [Oleg] | WL-500gP - fw: 1.9.2.7-7f-USB-1.63 [Oleg&koppel.cz] ]

  14. #14
    Join Date
    May 2004
    Location
    Netherlands
    Posts
    70
    I'm running now with 1.8.2.4 for 2 days without any trouble!

    Is this problem going to be fixed in the future or is 1.8.2.4 the last firmware I can ever use?

    Will it be FEATURES or STABILITY in future releases??


    Please do not forget us in the new releases!

  15. #15
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,356
    Ok, try 1.9.2.7-1 then and let me know if it works...

Page 1 of 11 123 ... LastLast

Similar Threads

  1. stability
    By rexster in forum WL-500g Q&A
    Replies: 3
    Last Post: 24-07-2009, 09:22
  2. 1.9.2.7 Audio features
    By Oleg in forum WL-500g Pics & Specs
    Replies: 49
    Last Post: 09-10-2007, 11:31
  3. WL-500G stability versus Wrt54G
    By kolaf in forum WL-500g Q&A
    Replies: 3
    Last Post: 14-05-2005, 12:31
  4. Witch features are implemented in Samba?
    By Ikke in forum WL-500g Q&A
    Replies: 1
    Last Post: 20-08-2004, 09:18
  5. New Features
    By njs in forum WL-500g Q&A
    Replies: 0
    Last Post: 02-01-2004, 16:49

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •