Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 58

Thread: WL-500gP и CDMA модем Pantech UM150/175/185/190 и Huawei EC306 от ИнтерТелекома

  1. 02-08-2010, 07:52 #16
    Maxiller
    Maxiller is offline фанат
    Join Date
    Oct 2008
    Posts
    55
    Quote Originally Posted by Denoiser View Post
    прошивка r1825

    пока вообще подключения нет.
    скрипт еррор даже при включении роутера сразу.
    делаю ребут и лезет такое
    acm для телефонов.
    Что у тебя здесь?
    Reply With Quote Reply With Quote
  2. 02-08-2010, 07:54 #17
    Denoiser
    Denoiser is offline Junior Member
    Join Date
    Aug 2010
    Posts
    6
    Quote Originally Posted by Maxiller View Post
    acm для телефонов.
    Что у тебя здесь?
    СДМА/ЕВДО )
    Reply With Quote Reply With Quote
  3. 02-08-2010, 07:59 #18
    rss
    rss is offline Forum Guru
    Join Date
    Jan 2010
    Posts
    1,260
    Quote Originally Posted by Denoiser View Post
    прошивка r1825
    делаю ребут и лезет такое
    Code:
    Jan 1 02:00:47 admin: pppd exit code: 2
Jan 1 02:00:49 pppd[294]: In file /tmp/ppp/peers/dialup: unrecognized option '/dev/usb/acm/1'
Jan 1 02:00:49 admin: pppd exit code: 2
Jan 1 02:00:52 pppd[304]: In file /tmp/ppp/peers/dialup: unrecognized option '/dev/usb/acm/1'
Jan 1 02:00:52 admin: pppd exit code: 2
    Для r1825 довольно странно. Рекомендую перейти на свежую ftp://core.dumped.ru/wl/1893/ - будем разбираться со скриптом дозвона. И, кстати, неплохо бы увидеть Diagnostic Info
    Reply With Quote Reply With Quote
  4. 02-08-2010, 08:12 #19
    Denoiser
    Denoiser is offline Junior Member
    Join Date
    Aug 2010
    Posts
    6
    Quote Originally Posted by rss View Post
    Для r1825 довольно странно. Рекомендую перейти на свежую ftp://core.dumped.ru/wl/1893/ - будем разбираться со скриптом дозвона. И, кстати, неплохо бы увидеть Diagnostic Info
    Вот что пишет на 1825 при первом запуске

    Status & Log - PPP Chat Log

    Using interface ppp0
    local IP address 10.64.64.64
    remote IP address 10.112.112.112
    Starting link
    Calling CDMA/EVDO
    PING 8.8.8.8 (8.8.8.8): 56 data bytes

    --- 8.8.8.8 ping statistics ---
    1 packets transmitted, 0 packets received, 100% packet loss
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 165), status = 0x3
    Connect script failed
    PING 8.8.8.8 (8.8.8.8): 56 data bytes

    --- 8.8.8.8 ping statistics ---
    1 packets transmitted, 0 packets received, 100% packet loss
    Starting link
    Calling CDMA/EVDO
    PING 8.8.8.8 (8.8.8.8): 56 data bytes
    прикрепляю сис. лог и дигностик
    Attached Files Attached Files
    Reply With Quote Reply With Quote
  5. 02-08-2010, 08:20 #20
    Maxiller
    Maxiller is offline фанат
    Join Date
    Oct 2008
    Posts
    55
    Quote Originally Posted by Denoiser View Post
    Вот что пишет на 1825 при первом запуске
    Может имеет смысл пинговать не дефолтный 8.8.8.8, а нативный 10.112.112.112?
    Onlime @ RTN66U
    Megafon @ E392+WL500W
    DOVADO TINY (работает с E392, но не так шустро)
    Reply With Quote Reply With Quote
  6. 02-08-2010, 08:21 #21
    Denoiser
    Denoiser is offline Junior Member
    Join Date
    Aug 2010
    Posts
    6
    прошился на 1893

    при первом запуске подключилось сразу.
    тестирую
    Reply With Quote Reply With Quote
  7. 02-08-2010, 18:54 #22
    rss
    rss is offline Forum Guru
    Join Date
    Jan 2010
    Posts
    1,260
    Quote Originally Posted by Denoiser View Post
    прошился на 1893

    при первом запуске подключилось сразу.
    тестирую
    Судя по acm1 для 1825 вместо фактического
    Code:
    /dev/usb/acm/0 : 1.2.0 : Manufacturer="PANTECH" : Product="PANTECH USB MODEM"
    в настройках был порт 1.

    В текущей версии проверяется устройство /acm/$port, в 1825 проверялся /tyy/$port
    Reply With Quote Reply With Quote
  8. 12-10-2010, 15:08 #23
    Krizai
    Krizai is offline Registered User
    Join Date
    Oct 2009
    Posts
    1
    Пытаюсь подружить Asus 500gp2 и pantech, он же starcom UM150.
    Прошивка последняя 1.9.2.7-d-r2174.
    При подключении в логах наблюдаю вот такую картину:
    Code:
    Jan  1 00:00:03 kernel: usb.c: registered new driver usbdevfs
Jan  1 00:00:03 kernel: usb.c: registered new driver hub
Jan  1 00:00:03 kernel: usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
Jan  1 00:00:03 kernel: usb-ohci.c: usb-00:03.0, PCI device 14e4:471a
Jan  1 00:00:03 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 kernel: hub.c: USB hub found
Jan  1 00:00:03 kernel: hub.c: 2 ports detected
Jan  1 00:00:04 kernel: ehci_hcd 00:03.1: PCI device 14e4:471a
Jan  1 00:00:04 kernel: ehci_hcd 00:03.1: irq 6, pci mem b8003800
Jan  1 00:00:04 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan  1 00:00:04 kernel: ehci_hcd 00:03.1: USB 0.0 enabled, EHCI 1.00, driver 10 Dec 2004/2.4
Jan  1 00:00:04 kernel: hub.c: USB hub found
Jan  1 00:00:04 kernel: hub.c: 2 ports detected
Jan  1 00:00:04 kernel: usb.c: registered new driver usblp
Jan  1 00:00:04 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan  1 00:00:05 kernel: hub.c: new USB device 00:03.1-1, assigned address 2
Jan  1 00:00:05 kernel: hub.c: USB hub found
Jan  1 00:00:05 kernel: hub.c: 2 ports detected
Jan  1 00:00:05 kernel: usb.c: registered new driver audio
Jan  1 00:00:05 kernel: audio.c: v1.0.1:USB Audio Class driver
Jan  1 00:00:05 kernel: Linux video capture interface: v1.00
Jan  1 00:00:05 kernel: SCSI subsystem driver Revision: 1.00
Jan  1 00:00:06 kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:06 kernel: usb.c: registered new driver usb-storage
Jan  1 00:00:06 kernel: USB Mass Storage support registered.
Jan  1 00:00:33 dnsmasq-dhcp[74]: DHCPREQUEST(br0) 192.168.1.234 00:1f:e1:6f:60:ec 
Jan  1 00:00:33 dnsmasq-dhcp[74]: DHCPACK(br0) 192.168.1.234 00:1f:e1:6f:60:ec PovoStudio
Jan  1 00:00:55 dnsmasq-dhcp[74]: DHCPINFORM(br0) 192.168.1.234 00:1f:e1:6f:60:ec 
Jan  1 00:00:55 dnsmasq-dhcp[74]: DHCPACK(br0) 192.168.1.234 00:1f:e1:6f:60:ec PovoStudio
Jan  1 00:01:19 kernel: hub.c: new USB device 00:03.1-1.2, assigned address 3
Jan  1 00:01:20 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:01:20 kernel:   Vendor: PANTECH   Model: Mass Storage      Rev: 0001
Jan  1 00:01:20 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
Jan  1 00:01:20 kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Jan  1 00:01:20 kernel: sda: Waiting for disc 0 to settle.
Jan  1 00:01:22 kernel: sda: Unit Not Ready, sense:
Jan  1 00:01:22 kernel: Current 00:00: sns = 70  2
Jan  1 00:01:22 kernel: ASC=3a ASCQ= 0
Jan  1 00:01:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
Jan  1 00:01:23 kernel: sda : READ CAPACITY failed.
Jan  1 00:01:23 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  1 00:01:23 kernel: Current sd00:00: sns = 70  2
Jan  1 00:01:23 kernel: ASC=3a ASCQ= 0
Jan  1 00:01:23 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x3a 0x00 0x00 0x00 0x00 0x00 
Jan  1 00:01:23 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  1 00:01:23 kernel: Partition check:
Jan  1 00:01:23 kernel:  /dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  1 00:01:23 kernel:  I/O error: dev 08:00, sector 0
Jan  1 00:01:23 kernel:  unable to read partition table
Jan  1 00:01:26 kernel: sda: Waiting for disc 0 to settle.
Jan  1 00:01:27 kernel: usb.c: registered new driver acm
Jan  1 00:01:27 kernel: forcing new wMaxPacketSize for modem device: 4096
Jan  1 00:01:27 kernel: ttyACM0: USB ACM device
Jan  1 00:01:27 kernel: acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters (patched)
Jan  1 00:01:27 kernel: usb.c: USB disconnect on device 00:03.1-1.2 address 3
Jan  1 00:01:27 kernel: USB device disconnected from the SCSI subsystem
Jan  1 00:01:27 kernel: sda: Unit Not Ready, error = 0x70000
Jan  1 00:01:27 kernel: Unable to handle kernel paging request at virtual address 000000d1, epc == c0212068, ra == c0211e4c
Jan  1 00:01:27 kernel: Oops in fault.c::do_page_fault, line 206:
Jan  1 00:01:27 kernel: $0 : 00000000 1000dc00 801b0000 81968800 00000020 00000000 0000001e 00000000
Jan  1 00:01:27 kernel: $8 : 00000001 00001db3 00001db3 00001d8b 80230000 80230000 80230000 ffffffff
Jan  1 00:01:27 kernel: $16: 801b0900 81d20aa0 00000005 00000000 c0210000 81718000 c0210000 81813dc8
Jan  1 00:01:27 kernel: $24: 00000000 00000004                   81812000 81813d98 00000000 c0211e4c
Jan  1 00:01:27 kernel: Hi : 00000000
Jan  1 00:01:27 kernel: Lo : 00000800
Jan  1 00:01:27 kernel: epc   : c0212068    Tainted: P 
Jan  1 00:01:28 kernel: usb.c: registered new driver serial
Jan  1 00:01:28 kernel: usbserial.c: USB Serial support registered for Generic
Jan  1 00:01:28 kernel: usbserial.c: USB Serial Driver core v1.4
Jan  1 00:01:30 kernel: hub.c: new USB device 00:03.1-1.2, assigned address 4
Jan  1 00:01:30 kernel: forcing new wMaxPacketSize for modem device: 4096
Jan  1 00:01:30 kernel: ttyACM0: USB ACM device
Jan  1 00:01:30 kernel: usbserial.c: Generic converter detected
Jan  1 00:01:30 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Jan  1 00:01:31 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:01:31 kernel: USB device connected to the SCSI subsystem
Jan  1 00:01:31 kernel: usb.c: USB disconnect on device 00:03.1-1.2 address 4
Jan  1 00:01:31 kernel: usbserial.c: Generic converter now disconnected from ttyUSB0
Jan  1 00:01:31 kernel: Unable to disconnect USB device from the SCSI subsystem
Jan  1 00:01:33 kernel: hub.c: new USB device 00:03.1-1.2, assigned address 5
Jan  1 00:01:33 kernel: forcing new wMaxPacketSize for modem device: 4096
Jan  1 00:01:33 kernel: ttyACM0: USB ACM device
Jan  1 00:01:33 kernel: usbserial.c: Generic converter detected
Jan  1 00:01:33 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
Jan  1 00:01:34 kernel: usb.c: error getting string descriptor 0 (error=-71)
Jan  1 00:01:34 kernel: USB device connected to the SCSI subsystem
Jan  1 00:01:34 kernel: usb.c: USB disconnect on device 00:03.1-1.2 address 5
Jan  1 00:01:34 kernel: usbserial.c: Generic converter now disconnected from ttyUSB0
Jan  1 00:01:34 kernel: Unable to disconnect USB device from the SCSI subsystem
Jan  1 00:01:36 kernel: hub.c: new USB device 00:03.1-1.2, assigned address 6
Jan  1 00:01:36 kernel: forcing new wMaxPacketSize for modem device: 4096
Jan  1 00:01:36 kernel: ttyACM0: USB ACM device
Jan  1 00:01:36 kernel: usbserial.c: Generic converter detected
Jan  1 00:01:36 kernel: usbserial.c: Generic converter now attached to ttyUSB0 (or usb/tts/0 for devfs)
    И т.д. до бесконечности. Модем при этом соответсвенно тоже постоянно пытается включиться, но не включается.

    Может проблема с питанием, но во второй порт воткнут винт со своим питанием.

    Подскажите, пожалуйста, что это может быть, и в какую сторону копать.
    Last edited by Krizai; 13-10-2010 at 20:33.
    Reply With Quote Reply With Quote
  9. 17-01-2011, 20:35 #24
    Diggerua
    Diggerua is offline Junior Member
    Join Date
    Nov 2008
    Posts
    6

    dir-320 3G USB + WAN

    Возникла задача: в DIR-320 есть работающий модем USB Pantech UM175, все работает без проблем! Но есть еще и проводной инет воткнутый в WAN, как сделать чтоб при отключении проводного инета срабатывал на подключение модем от USB. Ну типа: если WAN конект NO, тогда конект USB. Далее если таймаут WAN (5-10-30мин.), тогда отключить USB и включить WAN.

    Сильно не пинайте! Как смог так и изложил. Буду рад любым объяснениям!

    Устройство Dir-320
    прошивка DIR320-1.9.2.7-d-r2394M
    модем Pantech UM175
    проводной оператор 5g (Киев)
    Reply With Quote Reply With Quote
  10. 17-01-2011, 20:41 #25
    Vampik
    Vampik is offline Forum Guru
    Join Date
    Mar 2009
    Location
    Moscow
    Posts
    968
    Можно вопрос вам немного не по теме - у вас этот USB модем без всякого шаманства и дополнительных настроек заработал на r2394?
    А то в списке модемов на wiki его нет, и недавно мне жаловались, что он якобы не работает.
    D-Link DIR-320 A1/A2, DIR-620 C1, Netgear WNR3500L v1 v2
    Reply With Quote Reply With Quote
  11. 17-01-2011, 20:46 #26
    Diggerua
    Diggerua is offline Junior Member
    Join Date
    Nov 2008
    Posts
    6
    без бубна не обошлось. прописывал все в ручную.
    Reply With Quote Reply With Quote
  12. 16-05-2011, 14:30 #27
    PVolodymyr
    PVolodymyr is offline Junior Member
    Join Date
    Feb 2011
    Posts
    15

    asus wl 500gP pantech um185

    Доброго времени суток
    Скажите пожалуйста, как узнать, какая версия прошивки для asus wl 500gP поддерживает CDMA модем Pantech UM 185 ?
    И может кто поднимал такую связку? Поделитесь пожалуйста опытом!
    ################################################## ######
    # UTStarcom UM185E (distributor "Alltel")

    DefaultVendor= 0x106c
    DefaultProduct=0x3b06

    TargetVendor= 0x106c
    TargetProduct= 0x3717

    CheckSuccess=20

    MessageContent="55534243b82e238c24000000800008ff02 0000000000000000000000000000"


    Может он же
    Last edited by PVolodymyr; 17-05-2011 at 23:14.
    Reply With Quote Reply With Quote
  13. 16-05-2011, 14:36 #28
    FilimoniC
    FilimoniC is offline The Last Millenium
    Send a message via ICQ to FilimoniC
    Join Date
    Jul 2005
    Posts
    800
    Судя по поиску, UM185 никто не интересовался.
    Но есть для других моделей много чего
    Sorry for my bad English.
    Покупайте Отечественных Слонов!!!
    Reply With Quote Reply With Quote
  14. 18-05-2011, 12:40 #29
    LastLeader
    LastLeader is offline Member
    Join Date
    Sep 2010
    Posts
    38

    Arrow ec122

    Что делать с модемом Huawei EC122, вроде и подключается а связь какая то глючная?
    Code:
    Calling CDMA/EVDO
ATZ
OK
ATDT#777
^HRSSILVL:40

^HDRRSSI: 20
Failed
Script /tmp/ppp/peers/chat.sh finished (pid 169), status = 0x3
Connect script failed
Calling CDMA/EVDO
~Failed (~)
<<< chat.sh >>> Modem session is up, force reconnect
Script /tmp/ppp/peers/chat.sh finished (pid 175), status = 0x0
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/usb/tts/0
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x3 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x4 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x5 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x5 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x6 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x6 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x7 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x7 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x8 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x8 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x9 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x9 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xa <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0xa <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0xb <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0xb <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xc <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0xc <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0xd <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0xd <pcomp> <accomp>]
rcvd [LCP ConfReq id=0xe <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0xe <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0xf <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0xf <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x10 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x11 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x11 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x12 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x13 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x13 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x14 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x14 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x1 <mru 1492> <asyncmap 0x0> <magic 0x466d45c8>]
rcvd [LCP ConfReq id=0x15 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x15 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x16 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x16 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
LCP: timeout sending Config-Requests
Connection terminated.
Modem hangup
Calling CDMA/EVDO
~Failed (~)
<<< chat.sh >>> Modem session is up, force reconnect
Script /tmp/ppp/peers/chat.sh finished (pid 181), status = 0x0
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/usb/tts/0
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x17 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x17 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x18 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x18 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x19 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x19 <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1a <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x1a <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x1b <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x1b <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1c <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x1c <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x1d <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x1d <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1e <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x1e <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x1f <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x1f <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x20 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x20 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfReq id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x21 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f> <pcomp> <accomp>]
sent [LCP ConfRej id=0x21 <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x2 <mru 1492> <asyncmap 0x0> <magic 0x358e8250>]
rcvd [LCP ConfReq id=0x22 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP ConfAck id=0x22 <asyncmap 0x0> <auth chap MD5> <magic 0x9e1b468f>]
sent [LCP EchoReq id=0x0 magic=0x358e8250]
rcvd [CHAP Challenge id=0x1 <cf17a80044d123f5bee3fd702e898a17>, name = ""]
sent [CHAP Response id=0x1 <98d5cf14403733f2e7f6362b413fd51c>, name = "80922028040@people.net.ua"]
rcvd [LCP EchoRep id=0x0 magic=0x9e1b468f]
rcvd [CHAP Success id=0x1 ""]
CHAP authentication succeeded
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <mppe -H -M -S -L -D +C> <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr 77.109.0.225>]
sent [IPCP ConfAck id=0x1 <addr 77.109.0.225>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 12 12 06 00 00 00 01 1a 04 78 00 18 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>]
sent [IPCP ConfReq id=0x2 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>]
rcvd [IPCP ConfAck id=0x2 <addr 109.167.15.178> <ms-dns1 77.109.1.8> <ms-dns2 77.109.1.9>]
local IP address 109.167.15.178
remote IP address 77.109.0.225
primary DNS address 77.109.1.8
secondary DNS address 77.109.1.9
Script /tmp/ppp/ip-up started (pid 188)
Script /tmp/ppp/ip-up finished (pid 188), status = 0x0
System time change detected.
    Reply With Quote Reply With Quote
  15. 19-05-2011, 19:24 #30
    dlukanidin
    dlukanidin is offline Forum Guru
    Join Date
    May 2010
    Posts
    660
    Quote Originally Posted by LastLeader View Post
    Что делать с модемом Huawei EC122, вроде и подключается а связь какая то глючная?
    Code:
    ^HRSSILVL:40

^HDRRSSI: 20
    По этим строкам могу предположить, что Вы подключаетесь не на data port, а на ui port, т.к. похоже это статусные сообщения, а они гонятся без запроса именно на ui port.
    Соответственно попробуйте другие порты.
    ASUS RT-AC66U <Merlin 384.15>
    ASUS RT-N66U <Merlin>
    ASUS RT-N16 <Merlin>
    ☀ Макет нового WEB интерфейса ☀ Для iPhone/iPad ☀
    Reply With Quote Reply With Quote
Page 2 of 4 FirstFirst 1234 LastLast
« Previous Thread | Next Thread »

Similar Threads

  1. Два провайдера (3G/CDMA/YOTA USB-модем и WAN)
    By andr128 in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 56
    Last Post: 09-05-2017, 10:32
  2. WeTelecom WM-D200/D300 CDMA модем от SkyLink и роутер Asus
    By dlukanidin in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 55
    Last Post: 22-02-2014, 19:08
  3. Asus WL-500gP & CDMA модем Sierra 595U/598U
    By Lukasarts in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 57
    Last Post: 08-02-2014, 21:05
  4. CDMA модем JOA Telecom LM-700R и WL-500gP
    By rollon in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 14
    Last Post: 06-01-2014, 18:43
  5. Asus WL-500gP + 3G/CDMA/EV-DO + people.net.ua
    By dimats in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 102
    Last Post: 01-09-2012, 18:52

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules