Hi everybody,

I've got a WL-HDD at home which is hooked up to my router via cable and I'm very happy with it. I now bought another WL-HDD for a friend, but there the WL-HDD needs to be integrated into the network via WLAN. Thus, the WL-HDD needs to behave as a wireless client. I tried and read many ways, but could someone just give me a clue how to change the setting so that it works this way?
I do not mean WDS, by the way. The network is a WPA2-encrypted network, thus WDS won't work (as it only works with WEP).

Here's what I've tried, resp. my questions:

"System Setup": Access Point or Home Gateway? Both do not sound correct here.
"IP Config - LAN": Get IP Automatically? is set to yes
"Wireless - Interface": Settings are set in accordance to the WPA2 network
"Wireless - Bridge": AP-Mode is set to Hybrid, although neither AP nor WDS mode are applicable. Connect to APs in Remote Bridge List? is set to yes and MAC-address of router is added.

I know that WL-HDD is no longer going to be supported, but adding the functionality that it behaves as a normal WLAN-client which gets its IP via DHCP would be a great feature to add!

CU!

F.