Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 116

Thread: Firmware v1.9.2.7 CR3 - Now CR3b [Oleg]

  1. #46

    pppd crashes?

    Hi,

    today i had the second time an crash of the pppoed. After a restart everything works fine. will this problem fixed i the next cr release? I want to try out 1.9.2.7 CR3a now.
    Bye Enno

    My FW is 1.9.2.7 CR3
    Here is my log:
    yesterday:
    Jan 1 04:48:22 pppd[2849]: pppd 2.4.3 started by admin, uid 0
    Jan 1 04:48:57 pppd[2849]: Timeout waiting for PADO packets
    Jan 1 04:48:57 pppd[2849]: Fatal signal 11
    Jan 1 04:48:57 pppd[2849]: Exit.

    today:
    Jan 1 01:00:05 pppd[71]: pppd 2.4.3 started by admin, uid 0
    Jan 1 01:00:05 kernel: lp driver: get device ID
    Jan 1 01:00:40 pppd[71]: Timeout waiting for PADO packets
    Jan 1 01:00:40 pppd[71]: Fatal signal 11
    Jan 1 01:00:40 pppd[71]: Exit.

  2. #47
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Upgrade to CR3a as I wrote before.

  3. #48
    Hi,

    I have upgraded from 1.8.1.7-3 to 1.9.2.7-3, thanks for all the work Oleg, but I found that the router loses its LAN host name after a number of hours.

    I then have to use the direct IP address for web admin and telnet. This means that samba drive mapping stop working until I reboot the router.

    I have checked the hosts file and it is still OK.

    The router kept its host name with 1.8.1.7-3. but samba kept failing as already described.

    Thanks

  4. #49
    Quote Originally Posted by Oleg
    You mean it does not reconnect automatically, when you disconnect it?
    According to your logs wl500g automatically connects on the startup, when it gots manual disconnect from the web interface and then manual connect. I could not see any problems here.
    Hi Oleg,
    attached you will find the log after 24h, the wl500g doesn't reconnect after the ISP disconnected the line. I had manually to reconnect.

    Regards Georg
    Attached Files Attached Files

  5. #50
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Quote Originally Posted by GeorgJ
    Hi Oleg,
    attached you will find the log after 24h, the wl500g doesn't reconnect after the ISP disconnected the line. I had manually to reconnect.

    Regards Georg
    Ok, I see. Same thing happened to me. ppp-2.4.3 seems to be buggy, I will probably will go to 2.4.2...

  6. #51
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Also, what happened after

    Jan 11 22:38:16 pppd[232]: Connection terminated.
    Jan 11 22:38:16 pppd[232]: PPP session is 4339
    Jan 11 22:38:16 pppd[232]: Using interface ppp0
    Jan 11 22:38:16 pppd[232]: Connect: ppp0 <--> eth1
    Jan 11 22:38:16 pppd[232]: Modem hangup
    Jan 11 22:38:46 pppd[232]: Modem hangup
    Jan 11 22:38:46 pppd[232]: Connection terminated.

    ?

  7. #52
    Quote Originally Posted by Oleg
    Also, what happened after

    Jan 11 22:38:16 pppd[232]: Connection terminated.
    Jan 11 22:38:16 pppd[232]: PPP session is 4339
    Jan 11 22:38:16 pppd[232]: Using interface ppp0
    Jan 11 22:38:16 pppd[232]: Connect: ppp0 <--> eth1
    Jan 11 22:38:16 pppd[232]: Modem hangup
    Jan 11 22:38:46 pppd[232]: Modem hangup
    Jan 11 22:38:46 pppd[232]: Connection terminated.

    ?
    Hi Oleg!

    Nothing happened, I had to reconnect manually.

    Regards Georg

  8. #53
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Nothing? I mean do you've anything in the log below this point? Saying something like Exit?
    Could you please post complete log?

  9. #54
    Quote Originally Posted by Oleg
    Nothing? I mean do you've anything in the log below this point? Saying something like Exit?
    Could you please post complete log?
    Incidently I rebooted and not only reconnected the router. The log was cleared. I will send you the log after this happens again tonight, around 23:30.
    Regards Georg

  10. #55
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Ok, thanks. In the mean time I will post 1.9.2.7-3b with ppp-2.4.2, which is more stable as seems. I'm started testing it right now. This will took 24h also...

  11. #56
    Join Date
    Jan 2005
    Location
    holland
    Posts
    2

    Red face

    I'm new at this. I've just bought a wl500G. Reception is good for only a few metres away, but transmission failes even to a PC on the next floor in my house. I've upgrade the drivers for the PCI cards...didn't help. Fiddled with the original and a new (external) antenna and it won't work! Now i'm told your latest firmware upgrade makes it possible to control and dramatically increase the signal strenght of the 500G. Is that true and if so, how do i install the firmware on my router? (I told you, i'm new at this ) My operating system is WinXP.

  12. #57
    Join Date
    Dec 2004
    Location
    the netherlands
    Posts
    155
    Quote Originally Posted by Michael57
    I'm new at this. how do i install the firmware on my router? (I told you, i'm new at this ) My operating system is WinXP.
    Start by reading the manuals. How to upgrade firmware is described in detail. Doesn't harm to read first and then ask

    Quick howto:

    go to http://my.router, logon to it as admin, and go to tab system setup, click firmware update, point to directory where you have downloaded the new firmware and click update.

    Wait until your browser screen gets updated and presto.

  13. #58
    Quote Originally Posted by Oleg
    Ok, thanks. In the mean time I will post 1.9.2.7-3b with ppp-2.4.2, which is more stable as seems. I'm started testing it right now. This will took 24h also...
    Here is the new log. It didn't reconnect at all, even not manually.
    I will install the b-version.
    Good Night.
    Georg
    Attached Files Attached Files

  14. #59
    Join Date
    Jan 2005
    Location
    Holland
    Posts
    9

    Just installed this firmware for Samba.... Works excellent!

    Just installed this firmware for Samba. Works really flawless on my environment!

    Thanx for the excellent work, Oleg!

  15. #60

    How to install this

    Quote Originally Posted by Oleg
    Ok, thanks. In the mean time I will post 1.9.2.7-3b with ppp-2.4.2, which is more stable as seems. I'm started testing it right now. This will took 24h also...
    Oleg, I've download the firmware (I've bought the wl 500g two days ago and I've tried to connect my HP 710C printer (parralel). But it still doesn't work. I've understood that with the new firmware this problem should be solved. But my system (XP-SP2) doesn't recognize the TRX extension. Which program do i need to instaal the new firmware?

Page 4 of 8 FirstFirst ... 23456 ... LastLast

Similar Threads

  1. Firmware v1.9.2.7 CR1 [Oleg]
    By Oleg in forum WL-500g Firmware Releases
    Replies: 53
    Last Post: 14-04-2005, 00:26
  2. Firmware v1.9.2.7 CR2 [Oleg]
    By Oleg in forum WL-500g Firmware Releases
    Replies: 64
    Last Post: 11-01-2005, 19:22
  3. Firmware v1.7.5.9 CR2 [Oleg]
    By Oleg in forum WL-500g Firmware Releases
    Replies: 38
    Last Post: 06-10-2004, 09:12
  4. Firmware v1.7.5.6 CR2 [Oleg]
    By Oleg in forum WL-500g Firmware Releases
    Replies: 37
    Last Post: 05-05-2004, 04:10
  5. Firmware v1.7.5.6 CR1 [Oleg]
    By Antiloop in forum WL-500g Firmware Releases
    Replies: 15
    Last Post: 07-04-2004, 18:22

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •