View Poll Results: Должно ли быть активным меню настройки MTU и MRU для протоколов L2TP и PPTP

Voters
18. You may not vote on this poll

  • Да, обязательно

    10 55.56%

  • Скорее Да, чем нет

    3 16.67%

  • Скорее Нет, чем да

    1 5.56%

  • Нет, это лишнее

    2 11.11%

  • Мне всё равно, есть оно или нет

    2 11.11%

  • Я не знаю, для чего это надо

    0 0%
Page 2 of 7 FirstFirst 1234 ... LastLast
Results 16 to 30 of 92

Thread: WL-500gP - L2TP - Корбина - Тула

  1. 15-06-2008, 11:13 #16
    avk
    avk is offline Подмастерье
    Join Date
    May 2006
    Location
    Moscow, Russia
    Posts
    1,457
    Quote Originally Posted by MrGalaxy View Post
    Лучше взгляните на это:
    ЭТО - я понимаю так, что отрабатывается Additional pppd options.
    У меня подобных строк нет, а результат показан выше.

    Quote Originally Posted by MrGalaxy View Post
    А вот это из исходников прошивки:
    Ну да, "the default is 1500". А Вы искренне полагаете, что у меня другие исходники?
    То, что Вы не поленились - это хорошо. Но, мне так кажется, это доказавает кривизну провайдера.
    Intel 2200BG (v.9.0.4.39) + Asus WL500g Premium (1.9.2.7-10.7) + ONLIME / [Corbina L2TP] / [MGTS + ZTE 831AII]
  2. 15-06-2008, 12:31 #17
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    Quote Originally Posted by avk View Post
    А Вы искренне полагаете, что у меня другие исходники?
    Я этого не говорил.

    Quote Originally Posted by avk View Post
    это доказавает кривизну провайдера.
    Да, кривизна. Что теперь, отказаться от Корбины и продать роутер? Не у всех есть выбор...

    А знаете, я опрос подниму (если есть такая возможность на форуме): нужны ли настройки mtu. Если за проголосует подавляющее меншинство, тогда и я отзову своё предложение, тем более, что у меня лично всё работает и на нашем местном форуме я дал мануал по настройке.
  3. 15-06-2008, 12:38 #18
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492

    Нужны ли настройки MTU для L2TP

    Уважаемые пользователи!
    Предлагаю ответить на вопрос "Должно ли быть активным меню настройки параметров MTU и MRU для протоколов L2TP и PPTP"?
  4. 15-06-2008, 12:50 #19
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    Сам проголосовал "Да", т.к. без настройки MTU в Туле Корбина по l2tp не работает, а после настройки работает.
  5. 15-06-2008, 13:14 #20
    avk
    avk is offline Подмастерье
    Join Date
    May 2006
    Location
    Moscow, Russia
    Posts
    1,457
    Quote Originally Posted by MrGalaxy View Post
    Да, кривизна. Что теперь, отказаться от Корбины и продать роутер? Не у всех есть выбор...
    ЕСТЬ!
    И даже два:
    1. Additional pppd options
    2. Настучать саппорту по... (здесь тоже есть несколько вариантов)
    Intel 2200BG (v.9.0.4.39) + Asus WL500g Premium (1.9.2.7-10.7) + ONLIME / [Corbina L2TP] / [MGTS + ZTE 831AII]
  6. 15-06-2008, 18:21 #21
    nnmax
    nnmax is offline Junior Member
    Join Date
    Apr 2008
    Posts
    5
    Quote Originally Posted by MrGalaxy View Post
    Я этого не говорил.

    Да, кривизна. Что теперь, отказаться от Корбины и продать роутер? Не у всех есть выбор...

    А знаете, я опрос подниму (если есть такая возможность на форуме): нужны ли настройки mtu. Если за проголосует подавляющее меншинство, тогда и я отзову своё предложение, тем более, что у меня лично всё работает и на нашем местном форуме я дал мануал по настройке.
    Если вам интересно могу проверить работоспособность wl500 , на Тульском впн сервере корбины, логи предоставлю.
  7. 15-06-2008, 20:15 #22
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    Quote Originally Posted by nnmax View Post
    Если вам интересно могу проверить работоспособность wl500 , на Тульском впн сервере корбины, логи предоставлю.
    А чем плохи выложенные мной? Адрес удалённого IP (пост №14) сами видите какой - самый что ни на есть тульский.
    Впрочем, давайте и Ваши логи до кучи, в подтверждение моих слов.
  8. 15-06-2008, 20:29 #23
    avk
    avk is offline Подмастерье
    Join Date
    May 2006
    Location
    Moscow, Russia
    Posts
    1,457
    Мне всё равно, есть оно или нет...
    потому что есть Additional pppd options
    Intel 2200BG (v.9.0.4.39) + Asus WL500g Premium (1.9.2.7-10.7) + ONLIME / [Corbina L2TP] / [MGTS + ZTE 831AII]
  9. 15-06-2008, 20:55 #24
    L.A.M.B.
    L.A.M.B. is offline Junior Member
    Join Date
    Jan 2008
    Posts
    17
    По скольку такой пункт в меню есть, то он должен быть активен, а использовать его или нет, каждый решит сам.
    Либо вообще теряется смысл его присутствия в меню.
  10. 15-06-2008, 21:14 #25
    avk
    avk is offline Подмастерье
    Join Date
    May 2006
    Location
    Moscow, Russia
    Posts
    1,457
    Первое:
    Для 1.9.2.7-10 при L2TP:
    Quote Originally Posted by avk View Post
    У меня без доп.параметров значение 1460.
    ...
    Я полагаю, что прошивка рассчитана на то, чтобы получить корректные параметры от провайдера. А посему поле ввода заблокировано, но в тоже время остается Additional pppd options для особо тяжелых случаев.
    Остальное - кривизна настроек провайдера.

    Второе:
    В официальной прошивке 1.9.7.7 (которую сейчас тестирую) поля MTU и MRU также заблокированы и для PPTP, и для L2TP. И реально сейчас для PPTP MTU=1400.
    Intel 2200BG (v.9.0.4.39) + Asus WL500g Premium (1.9.2.7-10.7) + ONLIME / [Corbina L2TP] / [MGTS + ZTE 831AII]
  11. 16-06-2008, 18:20 #26
    nnmax
    nnmax is offline Junior Member
    Join Date
    Apr 2008
    Posts
    5
    Quote Originally Posted by MrGalaxy View Post
    А чем плохи выложенные мной? Адрес удалённого IP (пост №14) сами видите какой - самый что ни на есть тульский.
    Впрочем, давайте и Ваши логи до кучи, в подтверждение моих слов.
    Ну собствено

    ppp0 Link encap:Point-Point Protocol
    inet addr:89.179.14.151 P-t-P:85.21.80.93 Mask:255.255.255.255
    UP POINTOPOINT RUNNING MULTICAST MTU:1464 Metric:1
    RX packets:9 errors:0 dropped:0 overruns:0 frame:0
    TX packets:23 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:513 (513.0 B) TX bytes:1155 (1.1 KiB)









    Jan 1 03:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
    Jan 1 03:00:03 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
    Jan 1 03:00:03 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
    Jan 1 03:00:03 kernel: 2.11 Wireless Controller 4.150.10.16
    Jan 1 03:00:03 kernel: device eth0 entered promiscuous mode
    Jan 1 03:00:03 kernel: device vlan0 entered promiscuous mode
    Jan 1 03:00:03 kernel: device eth1 entered promiscuous mode
    Jan 1 03:00:03 kernel: br0: port 2(eth1) entering learning state
    Jan 1 03:00:03 kernel: br0: port 1(vlan0) entering learning state
    Jan 1 03:00:03 kernel: br0: port 2(eth1) entering forwarding state
    Jan 1 03:00:03 kernel: br0: topology change detected, propagating
    Jan 1 03:00:03 kernel: br0: port 1(vlan0) entering forwarding state
    Jan 1 03:00:03 kernel: br0: topology change detected, propagating
    Jan 1 03:00:03 dnsmasq[71]: DHCP, IP range 192.168.1.2 -- 192.168.1.3, lease time 24h
    Jan 1 03:00:03 dnsmasq[71]: DHCP, /tmp/dnsmasq.log will be written every 8h
    Jan 1 03:00:03 dnsmasq[71]: read /etc/hosts - 5 addresses
    Jan 1 03:00:03 dnsmasq[71]: reading /tmp/resolv.conf
    Jan 1 03:00:04 kernel: usb.c: registered new driver usbdevfs
    Jan 1 03:00:04 kernel: usb.c: registered new driver hub
    Jan 1 03:00:04 kernel: usb-uhci.c: $Revision: 1.275 $ time 20:50:46 Mar 17 2008
    Jan 1 03:00:04 kernel: usb-uhci.c: High bandwidth mode enabled
    Jan 1 03:00:04 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
    Jan 1 03:00:04 kernel: ECHI PCI device 30381106 found.
    Jan 1 03:00:04 kernel: UCHI reg 0x41 = 10
    Jan 1 03:00:04 kernel: UCHI reg 0x41 changed to = 0
    Jan 1 03:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
    Jan 1 03:00:04 kernel: usb-uhci.c: Detected 2 ports
    Jan 1 03:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
    Jan 1 03:00:04 kernel: hub.c: USB hub found
    Jan 1 03:00:04 kernel: hub.c: 2 ports detected
    Jan 1 03:00:04 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
    Jan 1 03:00:04 kernel: ECHI PCI device 30381106 found.
    Jan 1 03:00:04 kernel: UCHI reg 0x41 = 10
    Jan 1 03:00:04 kernel: UCHI reg 0x41 changed to = 0
    Jan 1 03:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
    Jan 1 03:00:04 kernel: usb-uhci.c: Detected 2 ports
    Jan 1 03:00:04 kernel: usb.c: new USB bus registered, assigned bus number 2
    Jan 1 03:00:04 kernel: hub.c: USB hub found
    Jan 1 03:00:04 kernel: hub.c: 2 ports detected
    Jan 1 03:00:04 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    Jan 1 03:00:04 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
    Jan 1 03:00:04 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
    Jan 1 03:00:04 kernel: ehci_hcd 01:03.2: irq 12, pci mem c011c000
    Jan 1 03:00:04 kernel: usb.c: new USB bus registered, assigned bus number 3
    Jan 1 03:00:04 kernel: ECHI PCI device 31041106 found.
    Jan 1 03:00:04 kernel: ECHI reg 0x49 = 80010f20
    Jan 1 03:00:04 kernel: ECHI reg 0x49 changed to = 80010f00
    Jan 1 03:00:04 kernel: ECHI reg 0x4b = 80010f09
    Jan 1 03:00:04 kernel: ECHI reg 0x4b changed to = 80010f29
    Jan 1 03:00:04 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
    Jan 1 03:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    Jan 1 03:00:04 kernel: hub.c: USB hub found
    Jan 1 03:00:04 kernel: hub.c: 4 ports detected
    Jan 1 03:00:05 kernel: usb.c: registered new driver usblp
    Jan 1 03:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
    Jan 1 03:00:06 kernel: usb.c: registered new driver audio
    Jan 1 03:00:06 kernel: audio.c: v1.0.0:USB Audio Class driver
    Jan 1 03:00:06 kernel: Linux video capture interface: v1.00
    Jan 1 03:00:06 kernel: SCSI subsystem driver Revision: 1.00
    Jan 1 03:00:07 kernel: Initializing USB Mass Storage driver...
    Jan 1 03:00:07 kernel: usb.c: registered new driver usb-storage
    Jan 1 03:00:07 kernel: USB Mass Storage support registered.
    Jan 1 03:00:07 kernel: vlan1: Setting MAC address to 00 1e 8c d0 74 9d.
    Jan 1 03:00:07 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
    Jan 1 03:00:07 udhcpc[99]: udhcpc (v0.9.9-pre) started
    Jan 1 03:00:07 dhcp client: deconfig: lease is lost
    Jan 1 03:00:08 udhcpc[99]: Lease of 192.168.246.8 obtained, lease time 144000
    Jan 1 03:00:08 dnsmasq[71]: read /etc/hosts - 5 addresses
    Jan 1 03:00:08 dnsmasq[71]: reading /tmp/resolv.conf
    Jan 1 03:00:08 dnsmasq[71]: using nameserver 195.14.50.3#53
    Jan 1 03:00:08 dnsmasq[71]: using nameserver 192.168.240.156#53
    Jan 1 03:00:08 dnsmasq[71]: using nameserver 192.168.240.89#53
    Jan 1 03:00:08 dhcp client: bound IP : 192.168.246.8 from 192.168.240.223
    Jun 16 20:59:14 pppd[119]: Plugin pppol2tp.so loaded.
    Jun 16 20:59:14 pppd[119]: pppd 2.4.2 started by noname, uid 0
    Jun 16 20:59:14 pppd[119]: Using interface ppp0
    Jun 16 20:59:14 pppd[119]: Connect: ppp0 <-->
    Jun 16 20:59:14 pppd[119]: CHAP authentication succeeded
    Jun 16 20:59:14 dropbear[127]: Running in background
    Jun 16 20:59:14 pppd[119]: local IP address 89.179.14.151
    Jun 16 20:59:14 pppd[119]: remote IP address 85.21.80.93
    Jun 16 20:59:14 pppd[119]: primary DNS address 195.14.50.1
    Jun 16 20:59:14 pppd[119]: secondary DNS address 195.14.50.21
    Jun 16 20:59:14 dnsmasq[71]: read /etc/hosts - 5 addresses
    Jun 16 20:59:14 dnsmasq[71]: reading /tmp/resolv.conf
    Jun 16 20:59:14 dnsmasq[71]: using nameserver 195.14.50.21#53
    Jun 16 20:59:14 dnsmasq[71]: using nameserver 195.14.50.1#53
    Jun 16 20:59:15 L2TP: connect to ISP
    Jun 16 20:59:16 pppd[119]: local IP address 89.179.14.151
    Jun 16 20:59:16 pppd[119]: remote IP address 85.21.80.93
    Jun 16 20:59:16 pppd[119]: primary DNS address 195.14.50.1
    Jun 16 20:59:16 pppd[119]: secondary DNS address 195.14.50.21
    Jun 16 20:59:16 dnsmasq[71]: read /etc/hosts - 5 addresses
    Jun 16 20:59:16 dnsmasq[71]: reading /tmp/resolv.conf
    Jun 16 20:59:16 dnsmasq[71]: using nameserver 195.14.50.3#53
    Jun 16 20:59:16 dnsmasq[71]: using nameserver 192.168.240.156#53
    Jun 16 20:59:16 dnsmasq[71]: using nameserver 192.168.240.89#53
    Jun 16 20:59:16 L2TP: Disconnected
    Jun 16 20:59:16 pppd[119]: Child process /tmp/ppp/ip-down (pid 140) terminated with signal 11
    Jun 16 20:59:16 dnsmasq[71]: read /etc/hosts - 5 addresses
    Jun 16 20:59:16 dnsmasq[71]: reading /tmp/resolv.conf
    Jun 16 20:59:16 dnsmasq[71]: using nameserver 195.14.50.21#53
    Jun 16 20:59:16 dnsmasq[71]: using nameserver 195.14.50.1#53
    Jun 16 20:59:17 L2TP: connect to ISP
    Jun 16 20:59:23 ntp client: Synchronizing time with time.nist.gov ...
    Jun 16 21:00:06 dnsmasq[71]: DHCPDISCOVER(br0) 00:1d:e0:45:aa:63
    Jun 16 21:00:06 dnsmasq[71]: DHCPOFFER(br0) 192.168.1.3 00:1d:e0:45:aa:63
    Jun 16 21:00:06 dnsmasq[71]: DHCPREQUEST(br0) 192.168.1.3 00:1d:e0:45:aa:63
    Jun 16 21:00:06 dnsmasq[71]: DHCPACK(br0) 192.168.1.3 00:1d:e0:45:aa:63 microsof-edf263



    Настройки такие:

    WAN Connection Type: L2TP
    WAN Connection Speed: Auto negotiation
    Get IP automatically? Yes
    Get DNS Server automatically? Yes
    User Name: *****
    Password: *****
    Additional pppd options: nomppe nomppc sync
    Enable PPPoE Relay? No
    Heart-Beat or PPTP/L2TP (VPN) Server: 85.21.80.93 --sync --nobuffer
  12. 16-06-2008, 19:16 #27
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    nnmax,

    С Вашими настройками у меня ничего не изменилось. (Логи разбил на 2 порции, в одно сообщение не влазят).

    ppp0 Link encap:Point-Point Protocol
    inet addr:89.179.9.246 P-t-P:85.21.80.93 Mask:255.255.255.255
    UP POINTOPOINT RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:5 errors:0 dropped:0 overruns:0 frame:0
    TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:3
    RX bytes:206 (206.0 B) TX bytes:206 (206.0 B)


    Jan 1 03:00:02 syslogd started: BusyBox v1.1.3
    Jan 1 03:00:02 kernel: klogd started: BusyBox v1.1.3 (2008.03.17-18:24+0000)
    Jan 1 03:00:02 kernel: CPU revision is: 00029006
    Jan 1 03:00:02 kernel: Primary instruction cache 16kb, linesize 16 bytes (2 ways)
    Jan 1 03:00:02 kernel: Primary data cache 16kb, linesize 16 bytes (2 ways)
    Jan 1 03:00:02 kernel: Linux version 2.4.20 (root@localhost) (gcc version 3.2.3 with Broadcom modifications) #18 Sun Mar 30 13:13:29 MSD 2008
    Jan 1 03:00:02 kernel: Setting the PFC to its default value
    Jan 1 03:00:02 kernel: Determined physical RAM map:
    Jan 1 03:00:02 kernel: memory: 02000000 @ 00000000 (usable)
    Jan 1 03:00:02 kernel: On node 0 totalpages: 8192
    Jan 1 03:00:02 kernel: zone(0): 8192 pages.
    Jan 1 03:00:02 kernel: zone(1): 0 pages.
    Jan 1 03:00:02 kernel: zone(2): 0 pages.
    Jan 1 03:00:02 kernel: Kernel command line: root=/dev/mtdblock2 noinitrd init=/linuxrc console=ttyS0,115200
    Jan 1 03:00:02 kernel: CPU: BCM4704 rev 9 pkg 0 at 264 MHz
    Jan 1 03:00:02 kernel: Calibrating delay loop... 263.78 BogoMIPS
    Jan 1 03:00:02 kernel: Memory: 30092k/32768k available (1862k kernel code, 2676k reserved, 136k data, 72k init, 0k highmem)
    Jan 1 03:00:02 kernel: Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 1 03:00:02 kernel: Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 1 03:00:02 kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Jan 1 03:00:02 kernel: Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Jan 1 03:00:02 kernel: Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
    Jan 1 03:00:02 kernel: Checking for 'wait' instruction... unavailable.
    Jan 1 03:00:02 kernel: POSIX conformance testing by UNIFIX
    Jan 1 03:00:02 kernel: PCI: Initializing host
    Jan 1 03:00:02 kernel: PCI: Fixing up bus 0
    Jan 1 03:00:02 kernel: PCI: Fixing up bridge
    Jan 1 03:00:02 kernel: PCI: Fixing up bus 1
    Jan 1 03:00:02 kernel: Linux NET4.0 for Linux 2.4
    Jan 1 03:00:02 kernel: Based upon Swansea University Computer Society NET3.039
    Jan 1 03:00:02 kernel: Initializing RT netlink socket
    Jan 1 03:00:02 kernel: Starting kswapd
    Jan 1 03:00:02 kernel: Journalled Block Device driver loaded
    Jan 1 03:00:02 kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
    Jan 1 03:00:02 kernel: devfs: boot_options: 0x1
    Jan 1 03:00:02 kernel: NTFS driver v1.1.22 [Flags: R/O]
    Jan 1 03:00:02 kernel: pty: 256 Unix98 ptys configured
    Jan 1 03:00:02 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
    Jan 1 03:00:02 kernel: ttyS00 at 0xb8000300 (irq = 3) is a 16550A
    Jan 1 03:00:02 kernel: ttyS01 at 0xb8000400 (irq = 3) is a 16550A
    Jan 1 03:00:02 kernel: HDLC line discipline: version $Revision$, maxframe=4096
    Jan 1 03:00:02 kernel: N_HDLC line discipline registered.
    Jan 1 03:00:02 kernel: loop: loaded (max 8 devices)
    Jan 1 03:00:02 kernel: PPP generic driver version 2.4.2
    Jan 1 03:00:02 kernel: PPP Deflate Compression module registered
    Jan 1 03:00:02 kernel: PPP BSD Compression module registered
    Jan 1 03:00:02 kernel: MPPE/MPPC encryption/compression module registered
    Jan 1 03:00:02 kernel: PPPoL2TP kernel driver, V0.13 (oleg@cs.msu.su)
    Jan 1 03:00:02 kernel: Amd/Fujitsu Extended Query Table v1.3 at 0x0040
    Jan 1 03:00:02 kernel: Flash Id: Vendor: 0x0001 Device: 0x007e
    Jan 1 03:00:02 kernel: number of CFI chips: 1
    Jan 1 03:00:02 kernel: Flash device: 0x800000 at 0x1c000000
    Jan 1 03:00:02 kernel: Physically mapped flash: squashfs filesystem found at block 912
    Jan 1 03:00:02 kernel: Creating 5 MTD partitions on "Physically mapped flash":
    Jan 1 03:00:02 kernel: 0x00000000-0x00040000 : "boot"
    Jan 1 03:00:02 kernel: 0x00040000-0x007f0000 : "linux"
    Jan 1 03:00:02 kernel: 0x000e4000-0x007f0000 : "rootfs"
    Jan 1 03:00:02 kernel: 0x007f0000-0x00800000 : "nvram"
    Jan 1 03:00:02 kernel: 0x003e0000-0x007f0000 : "flashfs"
    Jan 1 03:00:02 kernel: sflash: found no supported devices
    Jan 1 03:00:02 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
    Jan 1 03:00:02 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
    Jan 1 03:00:02 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
    Jan 1 03:00:02 kernel: TCP: Hash tables configured (established 2048 bind 4096)
    Jan 1 03:00:02 kernel: Linux IP multicast router 0.06 plus PIM-SM
    Jan 1 03:00:02 kernel: ip_conntrack version 2.1 (256 buckets, 2048 max) - 352 bytes per conntrack
    Jan 1 03:00:02 kernel: ip_conntrack_pptp version 1.9 loaded
    Jan 1 03:00:02 kernel: ip_nat_pptp version 1.5 loaded
    Jan 1 03:00:02 kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Jan 1 03:00:02 kernel: ipt_time loading
    Jan 1 03:00:02 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    Jan 1 03:00:02 kernel: IPv6 v0.8 for NET4.0
    Jan 1 03:00:02 kernel: IPv6 over IPv4 tunneling driver
    Jan 1 03:00:02 kernel: NET4: Ethernet Bridge 008 for NET4.0
    Jan 1 03:00:02 kernel: 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
    Jan 1 03:00:02 kernel: All bugs added by David S. Miller <davem@redhat.com>
    Jan 1 03:00:02 kernel: FAT: bogus logical sector size 59648
    Jan 1 03:00:02 kernel: FAT: bogus logical sector size 59648
    Jan 1 03:00:02 kernel: NTFS: Unable to set blocksize 512.
    Jan 1 03:00:02 kernel: VFS: Mounted root (squashfs filesystem) readonly.
    Jan 1 03:00:02 kernel: Mounted devfs on /dev
    Jan 1 03:00:02 kernel: Freeing unused kernel memory: 72k freed
    Jan 1 03:00:02 kernel: Algorithmics/MIPS FPU Emulator v1.5
    Jan 1 03:00:02 kernel: eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.10.16
    Jan 1 03:00:02 kernel: PCI: Enabling device 01:02.0 (0004 -> 0006)
  13. 16-06-2008, 19:17 #28
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    Jan 1 03:00:02 kernel: 2.11 Wireless Controller 4.150.10.16
    Jan 1 03:00:02 kernel: device eth0 entered promiscuous mode
    Jan 1 03:00:02 kernel: device vlan0 entered promiscuous mode
    Jan 1 03:00:02 kernel: device eth1 entered promiscuous mode
    Jan 1 03:00:02 kernel: br0: port 2(eth1) entering listening state
    Jan 1 03:00:02 kernel: br0: port 1(vlan0) entering listening state
    Jan 1 03:00:02 kernel: br0: port 2(eth1) entering learning state
    Jan 1 03:00:02 kernel: br0: port 2(eth1) entering forwarding state
    Jan 1 03:00:02 kernel: br0: topology change detected, propagating
    Jan 1 03:00:02 kernel: br0: port 1(vlan0) entering learning state
    Jan 1 03:00:02 kernel: br0: port 1(vlan0) entering forwarding state
    Jan 1 03:00:02 kernel: br0: topology change detected, propagating
    Jan 1 03:00:02 dnsmasq[67]: started, version 2.22 cachesize 150
    Jan 1 03:00:02 dnsmasq[67]: read /etc/hosts - 5 addresses
    Jan 1 03:00:02 dnsmasq[67]: reading /tmp/resolv.conf
    Jan 1 03:00:02 kernel: usb.c: registered new driver usbdevfs
    Jan 1 03:00:02 kernel: usb.c: registered new driver hub
    Jan 1 03:00:03 kernel: usb-uhci.c: $Revision: 1.275 $ time 20:50:46 Mar 17 2008
    Jan 1 03:00:03 kernel: usb-uhci.c: High bandwidth mode enabled
    Jan 1 03:00:03 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
    Jan 1 03:00:03 kernel: ECHI PCI device 30381106 found.
    Jan 1 03:00:03 kernel: UCHI reg 0x41 = 10
    Jan 1 03:00:03 kernel: UCHI reg 0x41 changed to = 0
    Jan 1 03:00:03 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
    Jan 1 03:00:03 kernel: usb-uhci.c: Detected 2 ports
    Jan 1 03:00:03 kernel: usb.c: new USB bus registered, assigned bus number 1
    Jan 1 03:00:03 kernel: hub.c: USB hub found
    Jan 1 03:00:03 kernel: hub.c: 2 ports detected
    Jan 1 03:00:03 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
    Jan 1 03:00:03 kernel: ECHI PCI device 30381106 found.
    Jan 1 03:00:03 kernel: UCHI reg 0x41 = 10
    Jan 1 03:00:03 kernel: UCHI reg 0x41 changed to = 0
    Jan 1 03:00:03 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
    Jan 1 03:00:03 kernel: usb-uhci.c: Detected 2 ports
    Jan 1 03:00:03 kernel: usb.c: new USB bus registered, assigned bus number 2
    Jan 1 03:00:03 kernel: hub.c: USB hub found
    Jan 1 03:00:03 kernel: hub.c: 2 ports detected
    Jan 1 03:00:03 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    Jan 1 03:00:03 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
    Jan 1 03:00:03 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
    Jan 1 03:00:03 kernel: ehci_hcd 01:03.2: irq 12, pci mem c011c000
    Jan 1 03:00:03 kernel: usb.c: new USB bus registered, assigned bus number 3
    Jan 1 03:00:03 kernel: ECHI PCI device 31041106 found.
    Jan 1 03:00:03 kernel: ECHI reg 0x49 = 80010f20
    Jan 1 03:00:03 kernel: ECHI reg 0x49 changed to = 80010f00
    Jan 1 03:00:03 kernel: ECHI reg 0x4b = 80010f09
    Jan 1 03:00:03 kernel: ECHI reg 0x4b changed to = 80010f29
    Jan 1 03:00:03 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
    Jan 1 03:00:03 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
    Jan 1 03:00:03 kernel: hub.c: USB hub found
    Jan 1 03:00:03 kernel: hub.c: 4 ports detected
    Jan 1 03:00:03 kernel: usb.c: registered new driver usblp
    Jan 1 03:00:03 kernel: printer.c: v0.13: USB Printer Device Class driver
    Jan 1 03:00:03 kernel: Linux video capture interface: v1.00
    Jan 1 03:00:04 kernel: SCSI subsystem driver Revision: 1.00
    Jan 1 03:00:04 kernel: Initializing USB Mass Storage driver...
    Jan 1 03:00:04 kernel: usb.c: registered new driver usb-storage
    Jan 1 03:00:04 kernel: USB Mass Storage support registered.
    Jan 1 03:00:04 kernel: vlan1: Setting MAC address to 00 1f c6 52 fd 2b.
    Jan 1 03:00:04 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
    Jan 1 03:00:04 udhcpc[86]: udhcpc (v0.9.9-pre) started
    Jan 1 03:00:04 dhcp client: deconfig: lease is lost
    Jan 1 03:00:04 udhcpc[86]: Lease of 10.216.82.219 obtained, lease time 604800
    Jan 1 03:00:05 dnsmasq[67]: read /etc/hosts - 5 addresses
    Jan 1 03:00:05 dnsmasq[67]: reading /tmp/resolv.conf
    Jan 1 03:00:05 dnsmasq[67]: using nameserver 195.14.50.21#53
    Jan 1 03:00:05 dnsmasq[67]: using nameserver 195.14.50.1#53
    Jan 1 03:00:05 dhcp client: bound IP : 10.216.82.219 from 10.216.0.17
    Jan 1 03:00:06 pppd[106]: Plugin pppol2tp.so loaded.
    Jan 1 03:00:06 pppd[106]: pppd 2.4.2 started by admin, uid 0
    Jan 1 03:00:06 pppd[106]: Using interface ppp0
    Jan 1 03:00:06 pppd[106]: Connect: ppp0 <-->
    Jan 1 03:00:10 pppd[106]: CHAP authentication succeeded
    Jan 1 03:00:10 pppd[106]: local IP address 89.179.9.246
    Jan 1 03:00:10 pppd[106]: remote IP address 85.21.80.93
    Jan 1 03:00:10 pppd[106]: primary DNS address 195.14.50.1
    Jan 1 03:00:10 pppd[106]: secondary DNS address 195.14.50.21
    Jan 1 03:00:10 dnsmasq[67]: read /etc/hosts - 5 addresses
    Jan 1 03:00:10 dnsmasq[67]: reading /tmp/resolv.conf
    Jan 1 03:00:10 dnsmasq[67]: using nameserver 195.14.50.21#53
    Jan 1 03:00:10 dnsmasq[67]: using nameserver 195.14.50.1#53
    Jan 1 03:00:11 L2TP: connect to ISP
    Jun 16 22:01:20 ntp client: Synchronizing time with time.nist.gov ...
  14. 16-06-2008, 19:41 #29
    Serge_K
    Serge_K is offline Forum Guru
    Join Date
    Aug 2007
    Location
    Moscow, Russia
    Posts
    976
    Quote Originally Posted by MrGalaxy View Post
    Jan 1 03:00:02 kernel: 2.11 Wireless Controller 4.150.10.16
    ...
    Может Вы уже писали, а я пропустил: Вы после залития прошивки Олега роутер сбрасывали в дефолт? Ну не может одна и та же прошивка на одном и том же роутере вести себя по-разному!
  15. 16-06-2008, 20:01 #30
    MrGalaxy
    MrGalaxy is offline Вечный студент
    Join Date
    Apr 2008
    Location
    город самоваров и пряников
    Posts
    1,492
    Quote Originally Posted by Serge_K View Post
    Вы после залития прошивки Олега роутер сбрасывали в дефолт?
    Да! Без этого у меня вообще с сервером соединение не происходит.
Page 2 of 7 FirstFirst 1234 ... LastLast
« Previous Thread | Next Thread »

Similar Threads

  1. Скорость 500gP и Корбина (PPTP vs L2TP)
    By pilots in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 150
    Last Post: 22-01-2010, 19:50

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules