Results 1 to 3 of 3

Thread: 1.9.2.7-10 FTP access problem

  1. #1

    1.9.2.7-10 FTP access problem

    Hi. First of all I'm using Oleg only with web interface. I have problem with last firmware version. I cannot login to FTP accounts (private/public).

    When I'm trying to login thru e.g. Windows Commander I got error message:
    Code:
    500 Oops: cannot change directory: /tmp/harddisk/ftp_pub
    but df command shown different path (see below)

    Code:
    [root]$ df
    Filesystem           1k-blocks      Used Available Use% Mounted on
    /dev/root                 3072      3072         0 100% /
    /dev/discs/disc0/part1 201269344        32 201269312   0% /tmp/mnt/disc0_1
    /dev/discs/disc0/part2  42866976        32  42866944   0% /tmp/mnt/disc0_2
    I never had shuch problems before (I used previous version Oleg firmware in past)
    If anyone can help please write simple. All I know is how to run telent and login to router. That's all what I know about command line in linux

    Thank you in advance

    UPDATE:

    I've figured it out. Strange, I had to manually create whole folders structure.

    Code:
    ftp_pub
    ftp_pvt
         | - user1
         | - user2
    In previous version when I created user in web-admin it create folder on harddrive with user name by itself.
    Last edited by absolon; 19-05-2008 at 10:39.

  2. #2
    Join Date
    Dec 2007
    Location
    The Netherlands - Eindhoven
    Posts
    1,767
    I use also your firmware but I don''t have any problems.
    You can change the location of the folders yourself, I have something like this:
    Public Directory: /mnt/FTP/pub
    Private Directory: /mnt/FTP/pvt
    Anonymous Directory: /mnt/FTP/anonymous
    note that you need to create these folders yourself!
    so just do a mkdir to create one
    the mountpoints seem to be ok just login with the super user account (if enabled) so just use the user name and pass you use to get to the webinterface. you''ll see, it works

    if you are using the ftp server behind a firewall, dont forget to set the client to "active" instead of "passive".

  3. #3
    Code:
    500 Oops: cannot change directory: /tmp/harddisk/ftp_pub

    So, you have tryed to mount disc_03 into tmp/harddisk, but, for some reasons, you didn't succed

    Sugestion:
    Remove mountpoint tmp/harddisk from your fstab. Then, your disk0_3 will be mounted into /tmp/mnt
    Create directory structure as you like, from Windows Explorer (samba)
    Declare this directorys into wl500's web interface, FTP section



    Example:
    Private dir : /FTP PVT -private
    Public : /FTP PVT/FTP PUB -read/write
    Anonimus: /FTP PVT/FTP PUB -read only

    After, you can fallow raas HeadStart based on -10 firmware

    http://www.wl500g.info/showthread.ph...117#post112117


    Enjoy !
    Last edited by lordu; 29-09-2008 at 07:10.

Similar Threads

  1. FTP problem with user-access
    By Ashutor in forum WL-700g Q&A
    Replies: 3
    Last Post: 04-02-2008, 20:50
  2. Cannot access FTP from outside the router?
    By Rasmuskarlsen in forum WL-500gP Q&A
    Replies: 2
    Last Post: 23-05-2007, 22:10
  3. FTP access problem
    By Zsoltie in forum WL-500gP Firmware Discussion
    Replies: 3
    Last Post: 05-12-2006, 12:18
  4. FTP access problem
    By VaZso in forum WL-500g Q&A
    Replies: 7
    Last Post: 12-09-2006, 21:58

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •