Reply With QuoteIs this 1.9.2.7-2 or ASUS 1.9.2.7?
Registered User
Just tried. It makes my wireless signal very weak. I almost can't use it in 2nd floor of my house (the router is in basement). Go back to 1.8.x and everything is fine.
Administrator
Is this 1.9.2.7-2 or ASUS 1.9.2.7?
Member
I use Oleg's firmware 1.9.2.7-2. Connection with AP on distance of 300-400 meters. A level of a signal only 50 mW. And all works without interruption.
Last edited by Igor Kit; 05-01-2005 at 11:23.
Member
I have also problem with 1.9.2.7-2 and WDS. On other side is Edimax EW-7205Apb. On firmware 1.8.1.7-5 even with 1mw power output with 60kb pings I had 0% packet loss. With 1.9.2.7-2 with 84mw I had 50% packet loss !!! I tried wl configurator from 1.8.1.7 with same result. wl.o module from 1.8.1.7 wants somenthing (tc_blabla, crc32). I heard that the same problem is with WDS between 1.9.2.7 firmwares.
Financial forum supporters :)
Maximum power does not automatically mean optimal wireless connection. Output power is just one of the parameters you can change to optimize your wireless connection.Originally Posted by engy
Brubber
WL-500g, WL-138g, WL-160g
Member
I have tried also 1mw,10mw, 20mw, 40mw but problem with WDS remains. Both asuses are in bridge mode (AP+WDS).
Does anybody else noticed this problem?
Administrator
WDS does not work with 1.9.2.7.
Member
Thanx Oleg. Information about not working WDS came from your tests or from asus? Does asus know abou this terrible problem? Most people use two or more wl-500g to connect their networks with WDS. Will be solved this problem in new asus firmware release or in your modification?
1.9.2.7 firmware is unusable for me!
Administrator
read http://wl500g.info/faq.php?faq=asus_wl_x#faq_knownbugs for known bugs confirmed by either me or Oleg.
in fact WDS does work, but not for WPA connections only WEP works
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Member
I have noticed this problem with WDS and WEP64.
Administrator
have you tried WEP128?
WEP128 works, if it does not work then your configuration has some mismatches
My little Asus Collection: Too much to fit inhere, my 2 babies:WL500w 1.9.2.7-10(OLEG) VX2SE Yellow Lamborghini notebook
WL500g Forum Asus Files OpenDir
Asusforum.NL -- Asusforum.DE -- Asusforum.RU -- Asusforum.PL -- Asusforum.NET -- Asusforum.EU -- Asusforum.BE -- Asusforum.ES -- Asusforum.INFO
Member
I have tried everything and the problem is solved.
There is a bug in automatic Data Rate in fw 1.9.2.7. AP on other side is Edimax EW-7206APb which is 802.11b Only. I have tried setting Wireless mode to 802.11B only, setting Basec Rate Set to 1,2 Mbps and auto with same result - very big packet loss (50%). The only thing wich helped in my configuration is setting Data Rate to any value supported by other side AP. I have set Data Rate to 11Mbps and packet loss is 0% as before. So Automatic Data Rate doesn't work.
In older firmware 1.8.1.7 worked Auto Data Rate but in 1.9.2.7 not!
Junior Member
Tried thatdidn't work
Junior Member
I have the same problem. 1 m from the router the signal strength is about 5% only.
Posting Permissions