Hi,Originally Posted by Flappie
Here you can find everything you need for doing samba to work ...
Cheers
Oldudu
Is there a manual for configuring Smba on the wl500g?
I'm a nwebie. I have used the search, but can't find anuthing about configuring samba.
How can i mount my usb drive?
I have edit the /etc/smb.conf file, (vi /etc/smb.conf) but how can i save it?
Thx
Hi,Originally Posted by Flappie
Here you can find everything you need for doing samba to work ...
Cheers
Oldudu
I have used the search seeveral times, but i can't find anaything about hoe to config.
on http://wl500g.dyndns.org i have found this:
Root file system on the external USB drive
Bla bla bla
But when i try this commands:
# play with fdisk if you need to repartition drive
fdisk /dev/scsi/host0/bus0/target0/lun0/disc
# "format" partition
mke2fs -j /dev/scsi/host0/bus0/target0/lun0/part1
It says: Could not stat device /dev/scsi/host0/bus0/target0/lun0/part1 -- No such fle or directory
There's a lot of info in the WIKI system as well: http://wiki.wl500g.info/
The page for Samba was created for firmware 1.7.x.x but should get you up to speed for firmwares 1.8.x.x and up as well.