Printing on HPLJ 1000 with WL-500g

[jvelsen]

Did anybody succeed in printing on a HP Laserjet 1000 via a WL-500g ??
I think I tried about every option described in any document and on this forum without any result.

I've loaded the latest firmware: 1.9.2.7
The printer is recognized by the system (I can view the properties and the printer is shown in the webmanager) but when I print there's no reaction from the printer (only a very general errormessage).

Any suggestions (apart from new printer/router) are welcome.

[brubber]

From the HP LJ 1000 Printer Data sheet @ http://www.printerworks.com/DataShee...000.html#table

Networking: Direct (local) connection with network sharing through Windows-sharing only

and

Jetdirect support (RAW printing): None

If it's a Windriver and not a hardware problem you may try drivers for another HP LJ printer (HP LJ 4 or 5) or some other simple HP desktop laserjets.

another option may be to get a firmware with Samba

[Ghostrider(NL)]

The reason why it isn't working is that due to the simplicity of the printer,
the driver ( The windows version ) has to upload the firmware everytime the printer is turned on. So your problem is only solvable when you are able to upload the firmware into the printer from the Asus Wl500G. I've been through
this problems before and finally got my LJ1000 to work on my debian server.

I've attached the firmware to this message so you should be able to give it a try.

Gl.

Ghostrider.

[Nelissuh]

Did anybody succeed in printing on a HP Laserjet 1000 via a WL-500g ??
I think I tried about every option described in any document and on this forum without any result.

I've loaded the latest firmware: 1.9.2.7
The printer is recognized by the system (I can view the properties and the printer is shown in the webmanager) but when I print there's no reaction from the printer (only a very general errormessage).

Any suggestions (apart from new printer/router) are welcome.

Hello, I'm new to this forum.

I also want to use a Laserjet 1000 printer in combination with my WL-500g. Does anybody know how to connect the two devices?

I have no Linux knowledge.

These link's don't give a lot hope it will work:

HP internet site link 1

HP internet site link 2

Thanx in advance, Nelissuh