Diffs with 1.9.2.6
Code:
diff -Burb 1926/src/router/Makefile 1927/src/router/Makefile
--- 1926/src/router/Makefile 2004-12-08 15:36:39.000000000 +0300
+++ 1927/src/router/Makefile 2004-12-10 04:00:51.000000000 +0300
@@ -493,9 +493,9 @@
images:
make images-WL500gx
make images-WL500g
- make images-WL500b
- make images-WL500bv2
- make images-WL300g
+ #make images-WL500b
+ #make images-WL500bv2
+ #make images-WL300g
#make images-WL331g
#make images-WL331gl
#make images-WL500gl
diff -Burb 1926/src/router/mipsel-uclibc/version.conf 1927/src/router/mipsel-uclibc/version.conf
--- 1926/src/router/mipsel-uclibc/version.conf 2004-12-02 03:39:51.000000000 +0300
+++ 1927/src/router/mipsel-uclibc/version.conf 2004-12-10 04:00:27.000000000 +0300
@@ -1,6 +1,6 @@
# Version Information used by addver in image section of Makefile
KERNEL_VER="1.9"
-FS_VER="2.6"
+FS_VER="2.7"
PRODUCTID="WL500gx"
HWL1="0.02"
HWH1="2.99"
diff -Burb 1926/src/router/rc/common_ex.c 1927/src/router/rc/common_ex.c
--- 1926/src/router/rc/common_ex.c 2004-12-03 19:46:47.000000000 +0300
+++ 1927/src/router/rc/common_ex.c 2004-12-10 04:03:12.000000000 +0300
@@ -229,12 +229,20 @@
#ifdef WPA2_WMM
if (nvram_match("wl_auth_mode", "wpa"))
{
+ nvram_set("wl_akm", "wpa wpa2");
nvram_set("wl0_akm", "wpa wpa2");
}
else if (nvram_match("wl_auth_mode", "psk"))
{
+ nvram_set("wl_akm", "psk psk2");
nvram_set("wl0_akm", "psk psk2");
}
+ else
+ {
+ nvram_set("wl_akm", "");
+ nvram_set("wl0_akm", "");
+ }
+
nvram_set("wl0_auth_mode", "none");
nvram_set("wl0_preauth", nvram_safe_get("wl_preauth"));
nvram_set("wl0_net_reauth", nvram_safe_get("wl_net_reauth"));