Firmware v1.9.2.7 CR2 [Oleg]

[Oleg]

New firmware, which contains several fixes are available for download.
The exact changes are:

• WPA2 & WME enabled, but WPA is not fully functional as seems
• Fixed WL-500gx USB 1.1 devices support
• Fixed ASUS firmware firewall problems (PPTP passthrough should work now)
• Fixed wshaper problems (was not functional in the 1.9.2.7-1)
• Added WL-500gx rootfs support

[int]

WL500g restart very times...

With:
Firmware v.1.9.2.7 CR2 [Oleg]
Firmware v.1.9.2.7 CR1 [Oleg]

and maybe 1.9.2.7 but I have not test!

[Viper_Jaro]

Hi i have uploaded 1.9.27CR2 from oleg and i have problem with my ftp. I can conect on it i see everything on ftp but i cant download nothing. An with original from asus it works. Where is the problem ??


And another one question. With original it works but the speed is only 300 kB/s. I have readed that there is USB1.1 and the transfer on USB1.1 is 1000 kB/s. Can you help me that i can download with full sped ?? plss

[chupra]

Yes, I've noticed the same problem with ftp on 1.9.2.7 CR1. I get the directory and file listing, but when I try to download the file, I get the file, but the resulting downloaded size is 0kb. The USB hard disk is 40gb with NTFS , and maybe that is causing the problem.

[Viper_Jaro]

I have a 160GB WD. I have watch a system log and there has it found corectly.

And can you help me with the transfer speed pls.

[Oleg]

Hi i have uploaded 1.9.27CR2 from oleg and i have problem with my ftp. I can conect on it i see everything on ftp but i cant download nothing. An with original from asus it works. Where is the problem ??

How you're accessing ftp - anonymously or using create account. If you've created account, then please write down Rights, which you've assigned to user.
Also, does upload works for you?

[Viper_Jaro]

I have accesed als anonymous als supervisor. And nothing. Always i can only list the directories and nothing to downloaden.

To the user acces, where can i find the ruls or samples ???

[Oleg]

To the user acces, where can i find the ruls or samples ???

Read user manual.

Does upload works for you?

[Oleg]

WL500g restart very times...

With:
Firmware v.1.9.2.7 CR2 [Oleg]
Firmware v.1.9.2.7 CR1 [Oleg]

and maybe 1.9.2.7 but I have not test!

Turn off your wl500g for ten minutes and then turn it on.

[N3oXid]

Hi all,

First of all, I'd like to thank Oleg and others for their great work on the WL-500g.
Here is the strange thing I have detected : since I upload and use the firmware 1.9.2.7 CR2 [Oleg], I can observe this thing in the system log :
"Dec 30 06:16:41 kernel: lp_wait_ready timeout
Dec 30 06:16:41 kernel: lp_write timeout
Dec 30 06:16:46 kernel: lp_wait_ready timeout
Dec 30 06:16:46 kernel: lp_write timeout"
etc ...
A real flood from the LPR daemon when my printer is switch off.
And when I switch on my printer (Deskjet 920C), it prints, sometimes, without any request, this kind of information :
"PARPORT: DESKJET 920C"
Of course, In one hand, I don't want my printer to print thing alone ; And in the other hand, I want to switch off my printer when I don't use it.
Thank you for your support.

[Oleg]

Hi all,

First of all, I'd like to thank Oleg and others for their great work on the WL-500g.
Here is the strange thing I have detected : since I upload and use the firmware 1.9.2.7 CR2 [Oleg], I can observe this thing in the system log :
"Dec 30 06:16:41 kernel: lp_wait_ready timeout
Dec 30 06:16:41 kernel: lp_write timeout
Dec 30 06:16:46 kernel: lp_wait_ready timeout
Dec 30 06:16:46 kernel: lp_write timeout"
etc ...
A real flood from the LPR daemon when my printer is switch off.
And when I switch on my printer (Deskjet 920C), it prints, sometimes, without any request, this kind of information :
"PARPORT: DESKJET 920C"
Of course, In one hand, I don't want my printer to print thing alone ; And in the other hand, I want to switch off my printer when I don't use it.
Thank you for your support.

Ok, I will check on this, looks like debug output.
In the mean time I'm suggesting you to write to ASUS Tech support.

[jimmy]

hi, ppl
ive been away for some time, so i dont know whats new at this forum.
what i would like to to know is if this firmware support "USB Plug-‘n'-share speaker" reported by asus on the latest firmware avaible???

[Oleg]

"PARPORT: DESKJET 920C"

Is this the exact message? I mean character case and so on?

Also, have you tried using RAW printing instead?

[solha]

Just updated my WL300g with the new v.1.9.2.7 CR2 firmware and, as I use RADIUS authentication, I could no longer access the wireless network, but via ethernet I can access the AP, configure it via web and access it via telnet or ssh. The RADIUS server is not even contacted by the AP with this firmware. Nevertheless, the v.1.9.2.7 CR1 firmware works like a charm! Maybe I'm putting this message in the wrong forum, but as the WL300g forum is kinda empty and as Oleg offers also custom firmware for this AP, I decided to post this here.

Thanks in advance!

[Oleg]

Just updated my WL300g with the new v.1.9.2.7 CR2 firmware and, as I use RADIUS authentication, I could no longer access the wireless network, but via ethernet I can access the AP, configure it via web and access it via telnet or ssh. The RADIUS server is not even contacted by the AP with this firmware. Nevertheless, the v.1.9.2.7 CR1 firmware works like a charm! Maybe I'm putting this message in the wrong forum, but as the WL300g forum is kinda empty and as Oleg offers also custom firmware for this AP, I decided to post this here.

Thanks in advance!

Yes, this is expected. Looks like I'm was right - radius does not work with ASUS 1.9.2.7, thank you for your report. I will disable WPA2 back as it was in the 1.9.2.7-1.