After firmware upgrade, from v1.9.2.7-7g to latest 1.9.2.7-9, my system log becomes useless. Every 15 seconds appear new “udhcpc[92]” event, like this:

Mar 27 14:31:36 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:31:51 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:32:06 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:32:21 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:32:36 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:32:51 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:33:07 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:33:22 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:33:37 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:33:52 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:34:07 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
Mar 27 14:34:22 udhcpc[92]: Lease of 10.0.0.3 obtained, lease time 30
…

Of course, after few hours log is too big, system delete entire content and start all over again.

My WL-500g router works in PPPoE mode, on WAN port is attached noname ADSL modem/router in bridge mode. Before upgrade, I did not have any problem with logging.

I don’t know what to do?