Page 5 of 5 FirstFirst ... 345
Results 61 to 68 of 68

Thread: [HowTo] GPRS/3G/HSDPA/UMTS USB modem Huawei E220 on Asus router

  1. #61
    really want to know when will the firmware support E180/K3715 modem?

  2. #62
    Quote Originally Posted by idsdown View Post
    really want to know when will the firmware support E180/K3715 modem?
    wl500gx has only 4 MB flash. Current firmwares with kernel 2.6 require >5 MB. But your modem should works with old WL500gx-1.9.2.7-d-r2624.trx.
    * Wiki *

  3. #63
    Quote Originally Posted by rss View Post
    wl500gx has only 4 MB flash. Current firmwares with kernel 2.6 require >5 MB. But your modem should works with old WL500gx-1.9.2.7-d-r2624.trx.
    yes, loaded WL500gx-1.9.2.7-d-r2624.trx, but don't know how to make it work with my 3G usb K3715/E180

  4. #64
    Quote Originally Posted by idsdown View Post
    yes, loaded WL500gx-1.9.2.7-d-r2624.trx, but don't know how to make it work with my 3G usb K3715/E180
    Select "USB Network Devices/3G/CDMA Modem" and "Set as WAN Connection Type by default".

    Send me please result of http://my.router/Main_SysInfo_Content.asp if the modem not works.
    * Wiki *

  5. #65
    Quote Originally Posted by rss View Post
    Select "USB Network Devices/3G/CDMA Modem" and "Set as WAN Connection Type by default".

    Send me please result of http://my.router/Main_SysInfo_Content.asp if the modem not works.
    as following:



    the sysinfo log as attached.

    sysinfo.txt

    The sysinfo is too long, post with two replies. Thanks

    Sysinfo 1/2

    Code:
    Status Information
    
    Linux version 2.4.37.11 (root@localhost) (gcc version 3.4.6) #18 2011-02-19 19:42:06 MSK
    1.9.2.7-d-r2624
    
    Thu Jan  1 08:03:16 UCT 1970
     08:03:16 up 3 min, load average: 0.01, 0.02, 0.00
    
    
    Interfaces
    
    br0       Link encap:Ethernet  HWaddr 00:13:D4:22:1B:28  
              inet addr:10.11.101.2  Bcast:10.11.101.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:414 errors:0 dropped:0 overruns:0 frame:0
              TX packets:737 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:30760 (30.0 KiB)  TX bytes:791553 (773.0 KiB)
    
    eth0      Link encap:Ethernet  HWaddr 00:13:D4:22:1B:28
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:413 errors:0 dropped:0 overruns:0 frame:0
              TX packets:737 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:39788 (38.8 KiB)  TX bytes:794501 (775.8 KiB)
              Interrupt:4 Base address:0x1000 
    
    eth1      Link encap:Ethernet  HWaddr 00:13:D4:22:1B:28  
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:1253
              TX packets:0 errors:693 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:12 Base address:0x4000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING MULTICAST  MTU:16436  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    
    vlan0     Link encap:Ethernet  HWaddr 00:13:D4:22:1B:28  
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:413 errors:0 dropped:0 overruns:0 frame:0
              TX packets:737 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:32354 (31.5 KiB)  TX bytes:794501 (775.8 KiB)
    
    vlan1     Link encap:Ethernet  HWaddr 00:13:D4:22:1B:28  
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    
    
    
    Routing Table
    
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    10.11.101.0     0.0.0.0         255.255.255.0   U     0      0        0 br0
    127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
    
    
    ARP Table
    
    IP address       HW type     Flags       HW address            Mask     Device
    10.11.101.3      0x1         0x2         00:13:72:68:D5:3C     *        br0
    
    
    IP Tables
    
    Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state INVALID 
      380 26532 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
        0     0 ACCEPT     all  --  lo     *       0.0.0.0/0            0.0.0.0/0           state NEW 
       71 16908 ACCEPT     all  --  br0    *       0.0.0.0/0            0.0.0.0/0           state NEW 
        0     0 ACCEPT     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp dpt:21 flags:0x17/0x02 
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 ACCEPT     all  --  br0    br0     0.0.0.0/0            0.0.0.0/0           
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state INVALID 
        0     0 TCPMSS     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x06/0x02 TCPMSS clamp to PMTU 
        0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED 
        0     0 DROP       all  --  !br0   ppp0    0.0.0.0/0            0.0.0.0/0           
        0     0 DROP       all  --  !br0   vlan1   0.0.0.0/0            0.0.0.0/0           
        0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           ctstate DNAT 
    
    Chain OUTPUT (policy ACCEPT 704 packets, 770K bytes)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain BRUTE (0 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain MACS (0 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain SECURITY (0 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x17/0x02 limit: avg 1/sec burst 5 
        0     0 RETURN     tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x17/0x04 limit: avg 1/sec burst 5 
        0     0 RETURN     udp  --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 5/sec burst 5 
        0     0 RETURN     icmp --  *      *       0.0.0.0/0            0.0.0.0/0           limit: avg 5/sec burst 5 
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain logaccept (0 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 LOG        all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW LOG flags 7 level 4 prefix `ACCEPT ' 
        0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain logdrop (0 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 LOG        all  --  *      *       0.0.0.0/0            0.0.0.0/0           state NEW LOG flags 7 level 4 prefix `DROP ' 
        0     0 DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    
    IP Tables NAT
    
    Chain PREROUTING (policy ACCEPT 31 packets, 1984 bytes)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain POSTROUTING (policy ACCEPT 4 packets, 1324 bytes)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 MASQUERADE  all  --  *      br0     10.11.101.0/24       10.11.101.0/24      
    
    Chain OUTPUT (policy ACCEPT 4 packets, 1324 bytes)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain VSERVER (0 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    
    Mount points
    
    rootfs on / type rootfs (rw)
    /dev/root on / type squashfs (ro)
    none on /dev type devfs (rw)
    proc on /proc type proc (rw)
    tmpfs on /tmp type tmpfs (rw,noatime)
    usbfs on /proc/bus/usb type usbfs (rw)
    
    
    Filesystem info
    
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/root                 3072      3072         0 100% /
    tmpfs                    15024       156     14868   1% /tmp
    
    
    Partitions
    
    
    
    USB HDD info
    
    
    
    
    Process List
    
      PID USER       VSZ STAT COMMAND
        1 admin     1484 S    /sbin/init
        2 admin        0 SW   [keventd]
        3 admin        0 SWN  [ksoftirqd_CPU0]
        4 admin        0 SW   [kswapd]
        5 admin        0 SW   [bdflush]
        6 admin        0 SW   [kupdated]
        7 admin        0 SW   [mtdblockd]
       60 admin     1484 S    syslogd -m 0 -O /tmp/syslog.log -S -D -l 7 -b 1
       64 admin     1480 S    klogd
       65 admin     1480 S    telnetd
       70 admin     1112 S    httpd vlan1
       72 admin     1080 S    nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
       75 admin     1040 S    upnp -D -L br0 -W vlan1
       78 admin      964 S    lld2d br0 eth1
       79 nobody     852 S    dnsmasq
       80 admin        0 SW   [khubd]
       89 admin     1480 S    rcamdmain
       95 admin     1480 S    watchdog
      111 admin     1496 S    /bin/sh /usr/ppp/dial
      160 admin     1184 S    pppd call dialup
      205 admin     1480 S    sh -c /tmp/ppp/peers/chat.sh
      206 admin     1480 S    /bin/sh /tmp/ppp/peers/chat.sh
      208 admin      664 S    chat -s -S -V -t 10 -f /tmp/ppp/peers/1.chat
      211 admin     1484 S    sh -c /tmp/../usr/sbin/sysinfo > /tmp/sysinfo.htm
      212 admin     1480 S    /bin/sh /tmp/../usr/sbin/sysinfo
      228 admin     1480 R    ps
    
    
    Kernel Modules
    
    ftdi_sio               24512   0 (unused)
    pl2303                 16592   0 (unused)
    usbserial              24196   1 [ftdi_sio pl2303]
    acm                     7572   0 (unused)
    videodev                8752   0 (unused)
    printer                12500   0 (unused)
    ehci-hcd               28740   0 (unused)
    usb-uhci               27412   0 (unused)
    usbcore                78888   1 [ftdi_sio pl2303 usbserial acm printer ehci-hcd usb-uhci]
    ip_nat_ftp              3072   0 (unused)
    ip_conntrack_ftp        4472   1
    ipt_NETMAP               760   0 (unused)
    wl                    897336   0 (unused)
    et                     29280   0 (unused)
    igs                    14436   0 (unused)
    emf                    18576   0 [igs]
    Last edited by idsdown; 31-12-2013 at 11:44.

  6. #66
    Sysinfo 2/2

    Code:
    USB Devices
    
    T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 4
    B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 2.04
    S:  Manufacturer=Linux 2.4.37.11 ehci_hcd
    S:  Product=PCI device 1106:3104
    S:  SerialNumber=01:02.2
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
    T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1001 Rev= 0.00
    S:  Manufacturer=HUAWEI Technology
    S:  Product=HUAWEI Mobile
    C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=serial
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=serial
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=120
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=100
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    
    
    USB devfs Devices
    
    Device         : Location : Info
    /dev/usb/tts/0 : 2.0 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/1 : 2.1 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/2 : 2.2 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/3 : 2.3 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/4 : 2.4 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    
    
    PPP chat log
    
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 161), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 165), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 169), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 173), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 179), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 183), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 187), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 193), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 197), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 201), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    
    CPU Info
    
    system type		: Broadcom BCM5365 chip rev 1 pkg 0
    processor		: 0
    cpu model		: BCM3302 V0.7
    BogoMIPS		: 199.47
    wait instruction	: no
    microsecond timers	: yes
    tlb_entries		: 32
    extra interrupt vector	: no
    hardware watchpoint	: no
    ASEs implemented	:
    VCED exceptions		: not available
    VCEI exceptions		: not available
    unaligned_instructions	: 1
    dcache hits		: 0
    dcache misses		: 0
    icache hits		: 0
    icache misses		: 0
    instructions		: 0
    
    
    Memory
    
            total:    used:    free:  shared: buffers:  cached:
    Mem:  30773248 13557760 17215488        0  1847296  5357568
    Swap:        0        0        0
    MemTotal:        30052 kB
    MemFree:         16812 kB
    MemShared:           0 kB
    Buffers:          1804 kB
    Cached:           5232 kB
    SwapCached:          0 kB
    Active:           3472 kB
    Inactive:         3600 kB
    HighTotal:           0 kB
    HighFree:            0 kB
    LowTotal:        30052 kB
    LowFree:         16812 kB
    SwapTotal:           0 kB
    SwapFree:            0 kB
    Attached Files Attached Files
    Last edited by idsdown; 31-12-2013 at 11:44.

  7. #67
    Quote Originally Posted by idsdown View Post
    Code:
    T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1001 Rev= 0.00
    S:  Manufacturer=HUAWEI Technology
    S:  Product=HUAWEI Mobile
    C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=serial
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=serial
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=120
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=100
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    
    
    USB devfs Devices
    
    Device         : Location : Info
    /dev/usb/tts/0 : 2.0 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/1 : 2.1 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/2 : 2.2 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/3 : 2.3 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    /dev/usb/tts/4 : 2.4 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile"
    
    
    PPP chat log
    
    Calling UMTS/GPRS
    Failed
    Script /tmp/ppp/peers/chat.sh finished (pid 161), status = 0x3
    Connect script failed
    Calling UMTS/GPRS
    Failed
    Your modem detected. And a driver connected. That is assigned an incorrect data port. Please check manually that dataport is 0, user interface port is 2.

    Or update the firmware from http://asus.vectormm.net/wl/3028/
    D-branch not updated officially for a long time. But some changes for modems were taken from RT-N branch.
    * Wiki *

  8. #68
    Quote Originally Posted by rss View Post
    Your modem detected. And a driver connected. That is assigned an incorrect data port. Please check manually that dataport is 0, user interface port is 2.

    Or update the firmware from http://asus.vectormm.net/wl/3028/
    D-branch not updated officially for a long time. But some changes for modems were taken from RT-N branch.

    It should be work now. as my card expired, it need to replace a new card. but the log shows OK.
    I reload the firmware as the link you provided. Thanks you very much.

    Code:
    USB Devices
    
    T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 4
    B:  Alloc=  1/800 us ( 0%), #Int=  1, #Iso=  0
    D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 2.04
    S:  Manufacturer=Linux 2.4.37.11 ehci_hcd
    S:  Product=PCI device 1106:3104
    S:  SerialNumber=01:02.2
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
    T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=12d1 ProdID=1001 Rev= 0.00
    S:  Manufacturer=HUAWEI Technology
    S:  Product=HUAWEI Mobile
    C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=serial
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
    I:  If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=120
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
    B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
    D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
    P:  Vendor=0000 ProdID=0000 Rev= 0.00
    S:  Product=USB UHCI Root Hub
    S:  SerialNumber=100
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
    I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
    E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
    
    
    USB devfs Devices
    
    Device         : Location : Info
    /dev/usb/tts/0 : 2.0 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile" 
    /dev/usb/tts/1 : 2.1 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile" 
    /dev/usb/tts/2 : 2.2 : Manufacturer="HUAWEI Technology" : Product="HUAWEI Mobile" 
    
    
    PPP chat log
    
    Calling WCDMA/UMTS/GPRS
    ATZ
    OK
    AT+CGDCONT=1,"IP","hkcsl"
    OK
    ATD*99#
    CONNECTchat:  Jan 01 08:00:50 CONNECT
    Script /tmp/ppp/peers/wan0_chat.sh finished (pid 180), status = 0x0
    Serial connection established.
    using channel 1
    Using interface ppp0
    Connect: ppp0 <--> /dev/usb/tts/0
    sent [LCP ConfReq id=0x1   ]
    rcvd [LCP ConfReq id=0x0     ]
    No auth is possible
    sent [LCP ConfRej id=0x0   ]
    rcvd [LCP ConfAck id=0x1   ]
    rcvd [LCP ConfReq id=0x1  ]
    sent [LCP ConfAck id=0x1  ]
    sent [LCP EchoReq id=0x0 magic=0xa0e41414]
    sent [CCP ConfReq id=0x1   ]
    sent [IPCP ConfReq id=0x1   ]
    rcvd [LCP DiscReq id=0x2 magic=0x6d091a]
    rcvd [LCP EchoRep id=0x0 magic=0x6d091a a0 e4 14 14]
    rcvd [LCP ProtRej id=0x3 80 fd 01 01 00 12 12 06 00 00 00 01 1a 04 78 00 18 04 78 00]
    Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
    rcvd [IPCP ConfNak id=0x1    ]
    sent [IPCP ConfReq id=0x2     ]
    rcvd [IPCP ConfNak id=0x2    ]
    sent [IPCP ConfReq id=0x3     ]
    rcvd [IPCP ConfNak id=0x3    ]
    sent [IPCP ConfReq id=0x4     ]
    rcvd [IPCP ConfNak id=0x4    ]
    sent [IPCP ConfReq id=0x5     ]
    rcvd [IPCP ConfNak id=0x5    ]
    sent [IPCP ConfReq id=0x6     ]
    rcvd [IPCP ConfNak id=0x6    ]
    sent [IPCP ConfReq id=0x7     ]
    rcvd [IPCP ConfNak id=0x7    ]
    sent [IPCP ConfReq id=0x8     ]
    rcvd [IPCP ConfNak id=0x8    ]
    sent [IPCP ConfReq id=0x9     ]
    rcvd [IPCP ConfNak id=0x9    ]
    sent [IPCP ConfReq id=0xa     ]
    rcvd [IPCP ConfNak id=0xa    ]
    sent [IPCP ConfReq id=0xb     ]
    rcvd [IPCP ConfNak id=0xb    ]
    sent [IPCP ConfReq id=0xc     ]
    rcvd [IPCP ConfNak id=0xc    ]
    sent [IPCP ConfReq id=0xd     ]
    Modem hangup
    Connection terminated.
    Calling WCDMA/UMTS/GPRS

Page 5 of 5 FirstFirst ... 345

Similar Threads

  1. Asus RT-N16 & LTE 4G/3G/CDMA modem
    By ua1onp in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 111
    Last Post: 18-08-2017, 16:49
  2. Asus WL-330N3G Travel Router - 3G Router из коробки
    By Romtron in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 24
    Last Post: 09-09-2013, 14:38
  3. [HowTo] Use Dropbox to download torrents on router
    By ryzhov_al in forum WL-500gP Tutorials
    Replies: 1
    Last Post: 13-01-2013, 09:54
  4. 3G USB Modem + Asus
    By dziadek in forum Polish Discussion - Polski (PL)
    Replies: 22
    Last Post: 20-10-2012, 07:21
  5. HOWTO use your WL-500g as IPv6 router
    By phedny in forum WL-500g/WL-500gx Tutorials
    Replies: 8
    Last Post: 17-02-2008, 07:19

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •