Results 1 to 5 of 5

Thread: problem telnet

  1. #1

    problem telnet

    The problem has arisen, through a web is connected and looked through, and here through a telnet, simply picked up but writes so (none) login, I write admin asks the password-admin.A was written (approximately) wl700 login earlier and to come it is impossible.
    When I write root appears:
    (none) login: root
    BusyBox v1.00-pre2 (2008.01.23-03:08+0000) Built-in shell (msh)
    Enter 'help' for a list of built-in commands.

    [u@h W]
    reset pressed, reflashing, what it is possible to make? So that like all works but it would be desirable Twonky to put, and as that is bad that telnet is not started.

  2. #2
    Something is wrong with rc.local and it is not being properly executed. You're experiencing the "stock" telnet which is enabled in the 1.0.7.8 release from Asus. I suspect they never meant to have telnet enabled at all, but who knows.

    Make sure you flash the XXX_02.nas version of my firmware:

    http://wl700g.homelinux.net/drupal/f...kc_1078_02.nas

    And follow the "I've really messed my rc.local" instructions found here:

    http://wl700g.homelinux.net/drupal/?q=node/192

    - K.C.

  3. #3
    Quote Originally Posted by kfurge View Post
    Something is wrong with rc.local and it is not being properly executed. You're experiencing the "stock" telnet which is enabled in the 1.0.7.8 release from Asus. I suspect they never meant to have telnet enabled at all, but who knows.

    Make sure you flash the XXX_02.nas version of my firmware:

    http://wl700g.homelinux.net/drupal/f...kc_1078_02.nas

    And follow the "I've really messed my rc.local" instructions found here:

    http://wl700g.homelinux.net/drupal/?q=node/192

    - K.C.
    Thank you very much. Works!

  4. #4
    Only after reboot the previous variant is restored: (
    How to make what always it was loaded normal rc.local ?

    PS. I am not familiar with Linux systems, therefore if that is possible describe step by step.

    Thanks!

  5. #5
    Bypass your broked rc.local as below, then copy /opt/etc/rc.local over /shares/MYVOLUME1/opt/etc/rc.local to restore default startup behavior:

    "cp /opt/etc/rc.local /shares/MYVOLUME1/opt/etc/rc.local"

    - K.C.
    Last edited by kfurge; 15-04-2008 at 02:39. Reason: Bad advice the first time

Similar Threads

  1. Asus + Zadacom default gateway problem
    By Anttu in forum WL-500gP Q&A
    Replies: 5
    Last Post: 29-02-2008, 06:35
  2. FTP problem with user-access
    By Ashutor in forum WL-700g Q&A
    Replies: 3
    Last Post: 04-02-2008, 19:50
  3. telnet troubles
    By trogdorix in forum WL-700g Q&A
    Replies: 2
    Last Post: 16-07-2007, 16:15
  4. Telnet Login Problem
    By rookie in forum WL-500gP Q&A
    Replies: 14
    Last Post: 10-03-2007, 20:36
  5. WL-500gP and Asus support experience
    By Blezi in forum WL-500gP Q&A
    Replies: 6
    Last Post: 03-12-2006, 12:59

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •