Oleg,
When disabled U4, changed U3 to MICRON MT46V32M16-6T and boot I can see 64MB (so it seams one chip is working). When changed U4 and enabled both (0x0011, 0x0062, 0x0000) I still see 64MB. Do you know where could be the problem (adding capacitor does not change anything).
BTW: do you know when default settings are used (in CFE "printdefault"). There are 0x0009, 0x0062, 0x0000) (sdram_init, sdram_config, sdram_ncdl) - in rescue mode?
