Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 59

Thread: [USB] External Storage Cases / External Harddrives

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Tested: NON-WORKING
    Model: WL-500gx
    Hardware: ?
    Firmware: Stock Asus 1.8.2.1

    Device:
    Brandname: Creative
    Brandtype: Muvo2 4GB
    USB Interface: USB 2.0
    URL To manufacturer: http://www.creative.com/
    URL To product: Creative's Muvo2 product page

    NB This webpage states that Kernels 2.4.26 and up have a fix (Asus firmware seems to be 2.4.20 plus USB upgrade to 2.4.25).

  2. #2
    Tested: WORKING
    Model: WL-500gx
    Firmware: 1.9.5.7a

    Device:
    Brandname: Transcend
    Brandtype: StoreJet 1.8"
    USB Interface: USB 2.0
    URL To product: http://www.transcendusa.com/Products...ngNo=0&ModNo=9
    URL To manufacturer: http://www.transcendusa.com
    Brandmodel: TS40GSJ18
    Size: 40GB
    partition: 1x40Gb NTFS 5.0

  3. #3

    Freecom FHD2-Pro

    Device:
    Brandname: Freecom
    Brandtype: FHD2-Pro
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    URL To manufacturer: http://www.freecom.com/

    It is USB powered (no need for a power adapter) on the WL500-gx.
    It is VERY quiet.

  4. #4
    Join Date
    Jun 2005
    Location
    Slovenia
    Posts
    736

    QTEC 3.5" Harddisk Case USB 2.0 Tested: NOT Working QTEC 3.5" Harddisk Case USB 2.0

    QTEC 3.5" Harddisk Case USB 2.0
    Tested: NOT Working
    Model: WL-500g Deluxe (WL-500gx)
    Firmware: 1.9.2.7-6a
    Brandtype: USB 2.0 HDD Case 3.5"
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    HD Size: 3.5"
    URL To manufacturer: http://www.qtec.info
    URL To product: http://www.qtec.info/products/produc...=14214&specs=1


    After several hours of giFT processing USB connection dies with the following klog:
    Code:
    EXT3-fs: mounted filesystem with ordered data mode.
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    usb-storage: host_reset() requested but not implemented
    scsi: device set offline - command error recover failed: host 0 channel 0 id 0 l
    un 0
    SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 6050000
     I/O error: dev 08:03, sector 7828824
     I/O error: dev 08:03, sector 7828832
     I/O error: dev 08:03, sector 7828888
     I/O error: dev 08:03, sector 7828952
     I/O error: dev 08:03, sector 7829016
     I/O error: dev 08:03, sector 7829080
     I/O error: dev 08:03, sector 7829144
     I/O error: dev 08:03, sector 7829208
     I/O error: dev 08:03, sector 7829272
     I/O error: dev 08:03, sector 7829336
     I/O error: dev 08:03, sector 7829400
     I/O error: dev 08:03, sector 7829464
     I/O error: dev 08:03, sector 7829512
     I/O error: dev 08:03, sector 6143600
     I/O error: dev 08:03, sector 6819944
     I/O error: dev 08:03, sector 30776
     I/O error: dev 08:03, sector 30840
     I/O error: dev 08:03, sector 30880
     I/O error: dev 08:03, sector 7829208
     I/O error: dev 08:03, sector 30888
     I/O error: dev 08:03, sector 30952
     I/O error: dev 08:03, sector 30960
     I/O error: dev ...
    Tried this on two hard disks with same results.
    Two ext3 partitions with 128MB swap. After hard reset it works again until it dies.

  5. #5

    Wd 250 Gb

    Tested: WORKING
    Model: WL-500g deluxe
    Firmware: 1.9.2.7-7b by Oleg

    Device:
    Brandname: Western Digital
    Brandtype: External drive Western Digital Essential
    USB Interface: USB 2.0
    URL To product: http://www.wdc.com/en/products/Products.asp?DriveID=94

    HDD used:
    Brandname: Western Digital
    Brandtype: 7200rpm, 2MB cache, hdd model: WDXUL2500BBNE
    Size: 250GB
    Partition: 250GB EXT3

  6. #6

    Angry

    Tested: NOT Working
    Model: WL-500g
    Firmware: 1.9.2.7-7b (customized - Oleg)

    Device:
    Brandname: Freecom
    Brandtype: classic hd
    Size: 160GB
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    URL To manufacturer: http://www.freecom.com
    URL To product:

  7. #7

    Ultron UHD-3500f

    Tested: Working
    Model: WL-500g delux
    Firmware: 1.6.5.3

    Device:
    Brandname: Ultron
    Brandtype: UHD-3500f
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    URL To manufacturer: http://www.ultron.de
    URL To product:

    Device Used during test:
    Brandname: Samsung
    Brandtype: SpinPoint P Series
    Brandmodel: SP1614N
    Size: 160GB
    partition: 115GB Linux / 30 GB FAT32

  8. #8

    Western Digital MyBook Essential 250GB

    Tested: WORKING!
    Model: WL-500gx
    Firmware: 1.9.2.7-7c

    Device:
    Brandname: Western Digital
    Brandtype: 3.5" External Harddisk USB 2.0
    USB Interface: USB 2.0
    Info:
    USB chip: ??
    1.1 Compatible
    UDMA (max): ??

    URL To manufacturer: Click
    URL To product: Click


    HDD used:
    Brandname:
    Brandtype:
    Size: 250GB
    Partition:
    Remark: Does a spindown after being idle some time. Stays quite cool, especially when spun down.

  9. #9
    Join Date
    Jul 2005
    Location
    London, UK
    Posts
    14
    Tested: Working
    Model: WL-500gx
    Firmware: 1.9.x.x Oleg

    Enclosure:
    Brandname: Safecom
    Brandtype: SUSB2-35CAF
    USB Interface: USB 2.0 High Speed (480Mbit) compliant (Firewire and SATA versions also available)
    URL To manufacturer: http://www.safecom.cn
    URL To product: http://safecom.cn/code/sub/category....34&subcatid=43
    Notes: fan can easily be disconnected once you can confirm low operating temperature. Enclosure works with Linux, Mac and Windows

    Drive:
    Brandname: Samsung
    Brandtype: SP2514N
    Interface: IDE/ATA (supports AAM quiet mode)
    URL To manufacturer: http://www.samsunghdd.com
    URL To product: http://www.samsung.com/Products/Hard...es_SP2514N.htm

  10. #10
    Join Date
    May 2004
    Location
    Den Bosch, The Netherlands
    Posts
    33
    Tested: Working
    Model: WL-500g
    Firmware: 1.9.2.7-7e

    Device:
    Brandname: Coolermaster ( Cooler Master )
    Brandtype: Xcraft RX-3HA
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    Firewire Interface: Firewire (400Mbit)
    URL To manufacturer: http://www.coolermaster.com/
    URL To product: Click

    Device Used during test:
    Brandname: Maxtor
    Brandtype: Maxtor Diamondmax Plus 10 250GB
    Brandmodel: 6L250R0
    Size: 250GB
    partition: 4GB using FAT32 (worked the first time)
    partition: 245GB using NTFS (backup purposes, not via Asus WL500g)

    No spindown while connected to WL500g
    Does spindown wile connected to Laptop (firewire)
    USB connecton (spindown) to laptop has to be tested soon.

  11. #11
    Join Date
    Aug 2006
    Location
    CZ, Olomouc
    Posts
    7

    Thumbs up

    Tested: Working
    Model: WL-500gP
    Firmware: 1.9.6.7 - factory original

    Device:
    Brandname: DeLock
    Brandtype: USB 2.0 IDE Converter
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    HD Size: 3.5"
    URL To manufacturer: http://www.delock.com
    URL To product: http://www.delock.com/produkte/grupp...H44_61329.html

    Device Used during test:
    Brandname: Western Digital
    Brandtype:
    Brandmodel: WD1200BB
    Size: 120GB
    partition: Fat32 120GB

    ================================================== ====

    also Tested: Working
    Model: WL-500gP
    Firmware: 1.9.6.7 - factory original

    Device:
    Brandname: Transcend
    Brandtype: 512MB JetFlash MP3
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    URL To manufacturer: http://www.transcend-uk.com
    URL To product: --
    Size: 512MB
    partition: Fat32 512MB

  12. #12

    LaCie Mobile Hard Drive - Working

    Tested: Working
    Model: WL-500g DeLuxe
    Firmware: 1.9.5.4

    Device:
    Brandname: LaCie
    Brandtype: LaCie Mobile Hard Drive, Design by F.A. Porsche 120GB, USB 2.0
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    HD Size: 2.5" 5400 rpm
    URL To manufacturer: http://www.lacie.com
    URL To product: http://www.lacie.com/products/product.htm?pid=10824
    extra: powered by USB bus (no extra power supply required)

  13. #13

    Angry Yakumo External Storage - NOT WORKING!!!

    Tested: NOT WORKING
    Model: WL-500g DeLuxe
    Firmware: 1.9.5.4

    Device:
    Brandname: Yakumo
    Brandtype: Yakumo External Storage 3,5" 320GB, USB 2.0
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    HD Size: 3.5" 7200 rpm
    URL To manufacturer: http://www.yakumo.com/
    URL To product:
    http://www.yakumo.com/products/mode=...art_nr=1036815

  14. #14
    Tested: Working
    Model: WL-500g Premium
    Firmware: 1.9.2.7-7f (Oleg)

    Device:
    Brandname: Spire
    Brandtype: SP222
    USB Interface: USB 2.0 High Speed (480Mbit) compliant
    URL To manufacturer: http://www.spirecoolers.com/
    URL To product: http://www.spirecoolers.com/enc.asp?ProdID=17

    HDD used during test:
    Brandname: Toshiba
    Brandmodel: MK1516GAP
    Size: 12GB
    partition: 11.5GB using ext3 (and 500MB swap)

  15. #15
    Tested: Working
    Model: WL-500g Premium
    Firmware: 1.9.2.7-7f (Oleg)

    Device:
    Brandname: Viewcon
    Brandtype: VE151
    USB Interface: USB 2.0
    URL To manufacturer: http://viewcon.net

    HDD used during test:
    Brandname: Samsung
    Brandmodel: -
    Size: 40GB
    partition: 38.0GB using ext3

    No spindown while connected to WL500g

Page 3 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. External antenna?
    By Guest in forum WL-107g [RAlink Chipset]
    Replies: 2
    Last Post: 11-04-2008, 10:32
  2. FTP on External USB HDD no WAN uploads
    By SpAwN in forum WL-500g Q&A
    Replies: 4
    Last Post: 13-07-2005, 02:56
  3. Use of external antenna
    By Theo in forum WL-500g Q&A
    Replies: 17
    Last Post: 27-06-2005, 17:35
  4. Spin down external HD
    By Styno in forum WL-500g Custom Development
    Replies: 29
    Last Post: 05-06-2005, 22:04
  5. Replies: 1
    Last Post: 09-03-2004, 17:16

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •