Page 11 of 12 FirstFirst ... 9101112 LastLast
Results 151 to 165 of 174

Thread: Custom 1.0.7.8 firmware is ready to download

  1. #151
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244
    Quote Originally Posted by Rick View Post
    Thx for replying so quickly but unfortunatly it did not help....................
    I have read some where that u can press the copy button to select a diffrent start up script but i did not get lucky to do this.......

    But when i instal firmware 2.0.0.7 i am able to telnet to the router.
    but when i go back to kfurge 1.0.7.8 i still have the same problem.

    any other good ideas ?

    Groeten
    Ok other good ideas?
    With Kfurge 1.0.7.8 (the latest) you have to wait for about 3 minutes after booting the Asus before the ready lights starts to blink. It will shine all the time before that moment. When it blinks, press the copy button and hold it until the ready light stops blinking.
    Then the default rc.local will be executed, your /shares/MYVOLUME1/opt will not be placed over /opt, and well, this should lead to a state that telnet is possible.
    Second idea: if you can telnet with firmware 2.0.0.7 (this is an extremely dangerous firmware, and if I were you, I would remove the WAN-cable before installing 2.0.0.7), you should be able to do something about /shares/MYVOLUME1/opt/etc/rc.local. Maybe rename it or so (mv rc.local rc.vocal)

    Good luck
    en de groeten terug
    Marc

  2. #152
    Join Date
    Mar 2008
    Location
    Alkmaar, Netherlands.
    Posts
    14

    I am in........

    i am conntected to the router...
    i want to go to shares/MYVOLUME1/opt/etc/rc.local
    but there is no data in this directory....... is that strange ?

  3. #153
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244
    Quote Originally Posted by Rick View Post
    i am conntected to the router...
    i want to go to shares/MYVOLUME1/opt/etc/rc.local
    but there is no data in this directory....... is that strange ?
    No, that is, shares/MYVOLUME1/opt/etc/rc.local is no directory, but a file . To get there, type:
    Code:
    cd /shares/MYVOLUME1/opt/etc
    cat rc.local
    Cat is similar to type in DOS
    then
    Code:
    mv rc.local rc.vocal
    or something you like better to rename this stuff .

    Good luck,
    Marc

  4. #154
    Join Date
    Mar 2008
    Location
    Alkmaar, Netherlands.
    Posts
    14

    Smile

    Yesterday i installed WinSCP, made a new connection withe the "SCP" protocol and was able to move, copy filles much easier...
    so now i have twonky in the opt/share/twonkymedia directory
    also found out that when a failure occured, for example i screwd up my rc.local and i wanted to login using putty i could not loging any more under the user admin.

    (none) login: admin
    Password:
    Login incorrect

    but with the user root i was able to loging in and changed back the rc.local
    to original

    (none) login: root

    now the only thing left to do is to start twonky, automatic.
    i have read some threads and changed rc.local
    but with no luck.

    when is start twonky manually.
    i get this :

    WL700gE login: root

    Password:
    [root@WL700gE /]$ cd opt/share/twonkymedia
    [root@WL700gE twonkymedia]$
    [root@WL700gE twonkymedia]$ ./twonkymedia
    ./twonkymedia: /opt/lib/libpthread.so.0: no version information available (required by ./twonkymedia)
    Segmentation fault
    [root@WL700gE twonkymedia]$
    [root@WL700gE twonkymedia]$


    but now when i first type in this line -> export LD_LIBRARY_PATH=/lib:/opt/lib
    i am able to start the server.
    with "ps"commando i can see what programmas are running and twonky is one of them.

    [root@WL700gE twonkymedia]$ export LD_LIBRARY_PATH=/lib:/opt/lib
    [root@WL700gE twonkymedia]$
    [root@WL700gE twonkymedia]$ ./twonkymedia
    [root@WL700gE twonkymedia]$
    [root@WL700gE twonkymedia]$ TwonkyMedia Version 4.4.4
    ps
    PID Uid VSZ Stat Command
    1 root 9116 S init
    2 root SW< [keventd]
    3 root SW [events/0]
    4 root SWN [ksoftirqd_CPU0]
    5 root SW [kswapd]
    6 root SW [bdflush]
    7 root SW [kupdated]
    8 root SW [mtdblockd]
    9 root SW [khubd]
    14 root SW< [mdrecoveryd]
    74 root SW< [ksed]
    75 root SW [ksechanged]
    77 root SW [gpio_out_pulse]
    78 root SW [button_notify_u]
    106 root SW< [raid1d]
    111 root SW< [raid1d]
    114 root SW [kreiserfsd]
    173 root 3600 S syslogd -R 255.255.255.255
    175 root 3552 S klogd
    177 root 11020 S httpd 80 y
    179 root 11020 S httpd 8080 share_browsing
    185 root 4880 S upnp -D -L br0 -W eth0
    195 root 1880 S udhcpd /tmp/udhcpd_lan.conf
    199 root 2188 S dnsmasq -i br0 -r /tmp/resolv.conf
    209 root 8520 S /usr/local/samba/sbin/smbd
    219 root 1856 S udhcpc -i eth0 -p /var/run/udhcpc.pid -s /tmp/udhcpc
    224 root 6792 S /usr/local/samba/sbin/nmbd
    228 root 5072 S vsftpd /etc/vsftpd.conf
    244 root 8520 S /usr/local/samba/sbin/smbd
    259 root 5824 S waveservermain
    261 root 5824 S rcamdmain
    262 root 4808 S infosvr br0
    263 root 5832 S watchdog
    275 root 5824 S usbcopymain
    490 root 3172 S thttpd -d /shares/MYVOLUME1/MYSHARE1/web -c ** -p 808
    492 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
    500 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
    504 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
    506 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
    515 root 3468 S ./dmathined /shares/MYVOLUME1/MYSHARE1 2
    518 root 3076 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
    519 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
    521 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
    522 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
    525 root 5732 S giftd --home-dir=/shares/MYVOLUME1/MYSHARE1/Download
    534 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
    543 guest 9128 S < /usr/local/samba/sbin/smbd
    575 root 2164 S utelnetd -d -i br0
    582 root 1364 S /opt/sbin/dropbear
    612 root 1444 S /opt/sbin/dropbear
    613 root 2024 S -bash
    625 root 2132 S -bash
    628 root 1876 S ./twonkymedia
    629 root 23472 S ./twonkymediaserver
    630 root 23472 S ./twonkymediaserver
    631 root 23472 S ./twonkymediaserver
    632 root 23472 S ./twonkymediaserver
    633 root 23472 S ./twonkymediaserver
    634 root 23472 S ./twonkymediaserver
    635 root 23472 S ./twonkymediaserver
    636 root 23472 S ./twonkymediaserver
    637 root 23472 S ./twonkymediaserver
    638 root 23472 S ./twonkymediaserver
    640 root 23472 R ./twonkymediaserver
    648 root 23472 S ./twonkymediaserver
    649 root 1792 R ps
    [root@WL700gE twonkymedia]$
    [root@WL700gE twonkymedia]$

    so how do i modify te rc.local the correct way i tried, the code what was posted but with no luck.....

    Gegroet Rick.

  5. #155
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244

    Exclamation Twonky needs the original libs !!!

    Hi Rick,

    To start Twonky automatically, you must start it before changing libraries in rc.local. So here is the first part of my rc.local
    Code:
    #!/opt/bin/bash
    
    #############
    # Get nvram variables
    #############
    pool=`nvram get apps_pool`
    share=`nvram get apps_share`
    kc_spin_down_hdd=`nvram get kc_spin_down_hdd`
    
    #############
    # Misc defines
    #############
    internal_hdd=/dev/ide/host2/bus0/target0/lun0/disc
    
    #############
    # These items only run once at power up
    #############
    if [ ! -f /tmp/rc.local.done ]; then
    
     #Start Twonkymedia, werkt met originele library_path
     /opt/share/TwonkyMedia/twonkymedia &
    
     export PATH=/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin
     export LD_LIBRARY_PATH=/opt/lib:/apps/lib:/apps/usr/gift-nasoc/lib
     export KCSHELL=/opt/bin/bash
    This works for me, you must adjust the directory for Twonky to your setup, Linux is case sensitive.

    Good luck,
    Marc

  6. #156
    Join Date
    Mar 2008
    Location
    Alkmaar, Netherlands.
    Posts
    14

    rc.local

    oke thx..
    i`ll give this a try but for now i will leave it as its is am happy the router is finally working correct , with twonky.
    so the next challenge i am facing is installing SABnzb.
    Hope everything goes as told on :

    http://wl700g.homelinux.net/portal/content/view/44/30/

    Greetings. Rick

  7. #157
    Join Date
    Mar 2008
    Location
    Alkmaar, Netherlands.
    Posts
    14

    Login.......

    I have set my router to WAN Acces.
    but to day i saw in my log file :

    Apr 10 06:02:05 dropbear[1172]: exit before auth: Disconnect received
    Apr 10 06:02:06 dropbear[1173]: login attempt for nonexistent user from 194.169.227.233:41438
    Apr 10 06:02:07 dropbear[1173]: exit before auth: Disconnect received
    Apr 10 06:02:08 dropbear[1174]: login attempt for nonexistent user from 194.169.227.233:41649

    etc. etc etc.

    does this means some is trying to login in to my router, at random port numbers ????
    because there are several attemps with diffrent port numbers.

    greetings Rick

  8. #158
    This is what i get. Can someone please tell me what it means?

    Apr 13 06:34:20 dropbear[9718]: Child connection from 202.100.82.230:57558
    Apr 13 06:34:30 dropbear[9718]: exit before auth: Failed to get remote version
    Apr 13 06:40:59 dropbear[9731]: Child connection from 202.100.82.230:60421
    Apr 13 06:41:02 dropbear[9732]: Child connection from 202.100.82.230:60514
    Apr 13 06:41:05 dropbear[9733]: Child connection from 202.100.82.230:60663
    Apr 13 06:41:05 dropbear[9731]: bad password attempt for 'root' from 202.100.82.230:60421
    Apr 13 06:41:07 dropbear[9731]: exit before auth (user 'root', 1 fails): Disconnect received
    Apr 13 06:41:07 dropbear[9734]: Child connection from 202.100.82.230:60803
    Apr 13 06:41:08 dropbear[9735]: Child connection from 202.100.82.230:60837
    Apr 13 06:41:11 dropbear[9738]: Child connection from 202.100.82.230:32840
    Apr 13 06:41:12 dropbear[9732]: exit before auth: Exited normally
    Apr 13 06:41:13 dropbear[9735]: bad password attempt for 'root' from 202.100.82.230:60837
    Apr 13 06:41:13 dropbear[9735]: exit before auth (user 'root', 1 fails): Disconnect received
    Apr 13 06:41:14 dropbear[9739]: Child connection from 202.100.82.230:33101
    Apr 13 06:41:15 dropbear[9734]: bad password attempt for 'root' from 202.100.82.230:60803
    Apr 13 06:41:16 dropbear[9733]: exit before auth: Failed to get remote version
    Apr 13 06:41:16 dropbear[9734]: exit before auth (user 'root', 1 fails): Disconnect received
    Apr 13 06:41:17 dropbear[9740]: Child connection from 202.100.82.230:33370
    Apr 13 06:41:17 dropbear[9741]: Child connection from 202.100.82.230:33402
    Apr 13 06:41:18 dropbear[9742]: Child connection from 202.100.82.230:33093
    Apr 13 06:41:19 dropbear[9739]: bad password attempt for 'root' from 202.100.82.230:33101
    Apr 13 06:41:20 dropbear[9739]: exit before auth (user 'root', 1 fails): Disconnect received
    Apr 13 06:41:20 dropbear[9743]: Child connection from 202.100.82.230:33708
    Apr 13 06:41:22 dropbear[9738]: exit before auth: Failed to get remote version
    Apr 13 06:41:22 dropbear[9741]: login attempt for nonexistent user from 202.100.82.230:33402
    Apr 13 06:41:23 dropbear[9741]: exit before auth: Disconnect received
    Apr 13 06:41:23 dropbear[9744]: Child connection from 202.100.82.230:34076
    Apr 13 06:41:25 dropbear[9740]: bad password attempt for 'root' from 202.100.82.230:33370
    Apr 13 06:41:26 dropbear[9745]: Child connection from 202.100.82.230:34422
    Apr 13 06:41:27 dropbear[9740]: exit before auth (user 'root', 1 fails): Exited normally
    Apr 13 06:41:28 dropbear[9746]: Child connection from 202.100.82.230:34183
    Apr 13 06:41:29 dropbear[9743]: login attempt for nonexistent user from 202.100.82.230:33708
    Apr 13 06:41:30 dropbear[9743]: exit before auth: Exited normally
    Apr 13 06:41:32 dropbear[9747]: Child connection from 202.100.82.230:35189
    Apr 13 06:41:33 dropbear[9746]: login attempt for nonexistent user from 202.100.82.230:34183
    Apr 13 06:41:34 dropbear[9744]: exit before auth: Failed to get remote version
    Apr 13 06:41:34 dropbear[9746]: exit before auth: Exited normally
    Apr 13 06:41:35 dropbear[9748]: Child connection from 202.100.82.230:35582
    Apr 13 06:41:37 dropbear[9745]: exit before auth: Failed to get remote version
    Apr 13 06:41:39 dropbear[9749]: Child connection from 202.100.82.230:35970
    Apr 13 06:41:39 dropbear[9742]: exit before auth: Failed to get remote version
    Apr 13 06:41:42 dropbear[9748]: login attempt for nonexistent user from 202.100.82.230:35582
    Apr 13 06:41:43 dropbear[9747]: exit before auth: Failed to get remote version
    Apr 13 06:41:43 dropbear[9748]: exit before auth: Disconnect received
    Apr 13 06:41:44 dropbear[9749]: login attempt for nonexistent user from 202.100.82.230:35970
    Apr 13 06:41:44 dropbear[9752]: Child connection from 202.100.82.230:36634
    Apr 13 06:41:45 dropbear[9753]: Child connection from 202.100.82.230:36358
    Apr 13 06:41:45 dropbear[9749]: exit before auth: Disconnect received
    Apr 13 06:41:45 dropbear[9754]: Child connection from 202.100.82.230:36768
    Apr 13 06:41:45 dropbear[9755]: Child connection from 202.100.82.230:36888
    Apr 13 06:41:48 dropbear[9756]: Child connection from 202.100.82.230:37160
    Apr 13 06:41:49 dropbear[9752]: login attempt for nonexistent user from 202.100.82.230:36634
    Apr 13 06:41:50 dropbear[9752]: exit before auth: Disconnect received
    Apr 13 06:41:51 dropbear[9758]: Child connection from 202.100.82.230:37511
    Apr 13 06:41:51 dropbear[9754]: login attempt for nonexistent user from 202.100.82.230:36768
    Apr 13 06:41:52 dropbear[9754]: exit before auth: Disconnect received
    Apr 13 06:41:53 dropbear[9759]: Child connection from 202.100.82.230:37805
    Apr 13 06:41:53 dropbear[9753]: exit before auth: Exited normally
    Apr 13 06:41:54 dropbear[9760]: Child connection from 202.100.82.230:37928
    Apr 13 06:41:58 dropbear[9759]: login attempt for nonexistent user from 202.100.82.230:37805
    Apr 13 06:41:59 dropbear[9759]: exit before auth: Disconnect received
    Apr 13 06:42:00 dropbear[9761]: Child connection from 202.100.82.230:38663
    Apr 13 06:42:06 dropbear[9755]: exit before auth: Failed to get remote version
    Apr 13 06:42:08 dropbear[9756]: exit before auth: Failed to get remote version
    Apr 13 06:42:10 dropbear[9762]: Child connection from 202.100.82.230:39878
    Apr 13 06:42:10 dropbear[9763]: Child connection from 202.100.82.230:39485
    Apr 13 06:42:11 dropbear[9758]: exit before auth: Failed to get remote version
    Apr 13 06:42:13 dropbear[9764]: Child connection from 202.100.82.230:40255
    Apr 13 06:42:16 dropbear[9760]: exit before auth: Failed to get remote version
    Apr 13 06:42:16 dropbear[9762]: login attempt for nonexistent user from 202.100.82.230:39878
    Apr 13 06:42:17 dropbear[9762]: exit before auth: Disconnect received
    Apr 13 06:42:17 dropbear[9763]: exit before auth: Exited normally
    Apr 13 06:42:19 dropbear[9766]: Child connection from 202.100.82.230:41018
    Apr 13 06:42:20 dropbear[9767]: Child connection from 202.100.82.230:40915
    Apr 13 06:42:21 dropbear[9761]: exit before auth: Failed to get remote version
    Apr 13 06:42:22 dropbear[9768]: Child connection from 202.100.82.230:41428
    Apr 13 06:42:28 dropbear[9769]: Child connection from 202.100.82.230:41796
    Apr 13 06:42:28 dropbear[9767]: exit before auth: Exited normally
    Apr 13 06:42:31 dropbear[9770]: Child connection from 202.100.82.230:42568
    Apr 13 06:42:32 dropbear[9768]: exit before auth: Failed to get remote version
    Apr 13 06:42:33 dropbear[9764]: exit before auth: Failed to get remote version
    Apr 13 06:42:34 dropbear[9771]: Child connection from 202.100.82.230:42962
    Apr 13 06:42:37 dropbear[9772]: Child connection from 202.100.82.230:43336
    Apr 13 06:42:39 dropbear[9769]: exit before auth: Failed to get remote version
    Apr 13 06:42:39 dropbear[9771]: login attempt for nonexistent user from 202.100.82.230:42962
    Apr 13 06:42:40 dropbear[9771]: exit before auth: Disconnect received
    Apr 13 06:42:40 dropbear[9773]: Child connection from 202.100.82.230:43719
    Apr 13 06:42:40 dropbear[9774]: Child connection from 202.100.82.230:43798
    Apr 13 06:42:41 dropbear[9770]: exit before auth: Exited normally
    Apr 13 06:42:43 dropbear[9775]: Child connection from 202.100.82.230:44109
    Apr 13 06:42:44 dropbear[9772]: login attempt for nonexistent user from 202.100.82.230:43336
    Apr 13 06:42:45 dropbear[9772]: exit before auth: Disconnect received
    Apr 13 06:42:46 dropbear[9776]: Child connection from 202.100.82.230:44434
    Apr 13 06:42:49 dropbear[9766]: exit before auth: Failed to get remote version
    Apr 13 06:42:49 dropbear[9777]: Child connection from 202.100.82.230:44874
    Apr 13 06:42:50 dropbear[9773]: exit before auth: Failed to get remote version
    Apr 13 06:42:51 dropbear[9774]: exit before auth: Failed to get remote version
    Apr 13 06:42:52 dropbear[9778]: Child connection from 202.100.82.230:45255
    Apr 13 06:42:54 dropbear[9775]: exit before auth: Failed to get remote version
    Apr 13 06:42:56 dropbear[9779]: Child connection from 202.100.82.230:45637
    Apr 13 06:42:57 dropbear[9776]: exit before auth: Failed to get remote version
    Apr 13 06:42:59 dropbear[9780]: Child connection from 202.100.82.230:45992
    Apr 13 06:43:02 dropbear[9781]: Child connection from 202.100.82.230:46380
    Apr 13 06:43:04 dropbear[9778]: exit before auth: Exited normally
    Apr 13 06:43:05 dropbear[9783]: Child connection from 202.100.82.230:46757
    Apr 13 06:43:10 dropbear[9780]: exit before auth: Exited normally
    Apr 13 06:43:14 dropbear[9784]: Child connection from 202.100.82.230:47544
    Apr 13 06:43:16 dropbear[9779]: exit before auth: Failed to get remote version
    Apr 13 06:43:17 dropbear[9785]: Child connection from 202.100.82.230:48299
    Apr 13 06:43:20 dropbear[9777]: exit before auth: Failed to get remote version
    Apr 13 06:43:20 dropbear[9786]: Child connection from 202.100.82.230:48653
    Apr 13 06:43:22 dropbear[9781]: exit before auth: Failed to get remote version
    Apr 13 06:43:23 dropbear[9787]: Child connection from 202.100.82.230:49069
    Apr 13 06:43:25 dropbear[9784]: exit before auth: Failed to get remote version
    Apr 13 06:43:29 dropbear[9787]: bad password attempt for 'root' from 202.100.82.230:49069
    Apr 13 06:43:29 dropbear[9788]: Child connection from 202.100.82.230:49445
    Apr 13 06:43:30 dropbear[9787]: exit before auth (user 'root', 1 fails): Disconnect received
    Apr 13 06:43:31 dropbear[9786]: exit before auth: Failed to get remote version
    Apr 13 06:43:33 dropbear[9789]: Child connection from 202.100.82.230:50240
    Apr 13 06:43:34 dropbear[9790]: Child connection from 202.100.82.230:50029
    Apr 13 06:43:36 dropbear[9783]: exit before auth: Failed to get remote version
    Apr 13 06:43:38 dropbear[9785]: exit before auth: Failed to get remote version
    Apr 13 06:43:39 dropbear[9791]: Child connection from 202.100.82.230:50633
    Apr 13 06:43:41 dropbear[9790]: exit before auth: Exited normally

    Thanks in advance.

  9. #159
    Join Date
    Jan 2007
    Location
    The Netherlands
    Posts
    244
    Could you do some investigation yourself?

    Maybe login with ssh and try a random password for root, what does the log then say?
    Maybe you could conclude then that someone evil is trying to get in!

    Maybe you could edit your loooooooong quote a bit and make it shrtr.

    Marc

  10. #160
    gingishan1

    Your being Hacked.
    Happens a lot.
    Ensure you keep dropbear with password on and look at settings for your VSFTPD sometimes they will try to get in that way as well.
    If your additionally worried install fail2ban as an additional measure.

  11. #161
    Join Date
    Jun 2007
    Location
    Netherlands
    Posts
    3

    Dovecot

    I want to start Dovecot automatic at boot up.
    How can I do that in rc.local.
    I tryed this several times, different ways but it won't start.
    When I start Dovecot manual it works fine.
    Someone there who can help me.

    Gr. Ronald

  12. #162
    Quote Originally Posted by Ford View Post
    I want to start Dovecot automatic at boot up.
    How can I do that in rc.local.
    I tryed this several times, different ways but it won't start.
    When I start Dovecot manual it works fine.
    Someone there who can help me?
    Two things generally are to blame for startup failures in rc.local:

    1) Either your PATH, or some other environment variable, is not properly configured. Make sure all the environment matches the one your have when you login.

    2) The busybox shell which executes rc.local is not able to execute the startup script for the program. Add this line to rc.local prior to executing the startup script for your application: "export KCSHELL=/opt/bin/bash". This will use bash instead of the busybox shell for every instance of /bin/sh.

    - K.C.

  13. #163
    Join Date
    Jun 2007
    Location
    Netherlands
    Posts
    3
    Thanks KC for your answer.
    But it don`t work this way.
    Is there maybe an other way to start Dovecot automatic.

  14. #164
    "ipkg update" will not work for me. (WL700gE_kc_1078_02.nas)
    I will install the syslog-ng, please help!

    THX

  15. #165
    Quote Originally Posted by Payton View Post
    "ipkg update" will not work for me. (WL700gE_kc_1078_02.nas)
    I will install the syslog-ng, please help!

    THX
    What's the error message?

    LK

Page 11 of 12 FirstFirst ... 9101112 LastLast

Similar Threads

  1. Installing Optware Packages on Asus Firmware 1.0.7.8
    By emailpr in forum WL-700g Firmware Discussion
    Replies: 3
    Last Post: 16-01-2008, 02:13
  2. wan to lan filter on default firmware 1.0.7.8?
    By nully in forum WL-700g Firmware Discussion
    Replies: 1
    Last Post: 11-11-2007, 00:36
  3. Custom Firmware v1.1.2.7
    By JOCKYW2001 in forum WL-HDD Firmware Releases
    Replies: 59
    Last Post: 11-12-2004, 13:26

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •