Custom 1.0.7.8 firmware is ready to download

[mumsoft]

Thx for replying so quickly but unfortunatly it did not help....................
I have read some where that u can press the copy button to select a diffrent start up script but i did not get lucky to do this.......

But when i instal firmware 2.0.0.7 i am able to telnet to the router.
but when i go back to kfurge 1.0.7.8 i still have the same problem.

any other good ideas ?

Groeten

Ok other good ideas?
With Kfurge 1.0.7.8 (the latest) you have to wait for about 3 minutes after booting the Asus before the ready lights starts to blink. It will shine all the time before that moment. When it blinks, press the copy button and hold it until the ready light stops blinking.
Then the default rc.local will be executed, your /shares/MYVOLUME1/opt will not be placed over /opt, and well, this should lead to a state that telnet is possible.
Second idea: if you can telnet with firmware 2.0.0.7 (this is an extremely dangerous firmware, and if I were you, I would remove the WAN-cable before installing 2.0.0.7), you should be able to do something about /shares/MYVOLUME1/opt/etc/rc.local. Maybe rename it or so (mv rc.local rc.vocal)

Good luck
en de groeten terug
Marc

[Rick]

i am conntected to the router...
i want to go to shares/MYVOLUME1/opt/etc/rc.local
but there is no data in this directory....... is that strange ?

[mumsoft]

i am conntected to the router...
i want to go to shares/MYVOLUME1/opt/etc/rc.local
but there is no data in this directory....... is that strange ?

No, that is, shares/MYVOLUME1/opt/etc/rc.local is no directory, but a file . To get there, type:

cd /shares/MYVOLUME1/opt/etc
cat rc.local

Cat is similar to type in DOS
then

mv rc.local rc.vocal

or something you like better to rename this stuff .

Good luck,
Marc

[Rick]

Yesterday i installed WinSCP, made a new connection withe the "SCP" protocol and was able to move, copy filles much easier...
so now i have twonky in the opt/share/twonkymedia directory
also found out that when a failure occured, for example i screwd up my rc.local and i wanted to login using putty i could not loging any more under the user admin.

(none) login: admin
Password:
Login incorrect

but with the user root i was able to loging in and changed back the rc.local
to original

(none) login: root

now the only thing left to do is to start twonky, automatic.
i have read some threads and changed rc.local
but with no luck.

when is start twonky manually.
i get this :

WL700gE login: root

Password:
[root@WL700gE /]$ cd opt/share/twonkymedia
[root@WL700gE twonkymedia]$
[root@WL700gE twonkymedia]$ ./twonkymedia
./twonkymedia: /opt/lib/libpthread.so.0: no version information available (required by ./twonkymedia)
Segmentation fault
[root@WL700gE twonkymedia]$
[root@WL700gE twonkymedia]$


but now when i first type in this line -> export LD_LIBRARY_PATH=/lib:/opt/lib
i am able to start the server.
with "ps"commando i can see what programmas are running and twonky is one of them.

[root@WL700gE twonkymedia]$ export LD_LIBRARY_PATH=/lib:/opt/lib
[root@WL700gE twonkymedia]$
[root@WL700gE twonkymedia]$ ./twonkymedia
[root@WL700gE twonkymedia]$
[root@WL700gE twonkymedia]$ TwonkyMedia Version 4.4.4
ps
PID Uid VSZ Stat Command
1 root 9116 S init
2 root SW< [keventd]
3 root SW [events/0]
4 root SWN [ksoftirqd_CPU0]
5 root SW [kswapd]
6 root SW [bdflush]
7 root SW [kupdated]
8 root SW [mtdblockd]
9 root SW [khubd]
14 root SW< [mdrecoveryd]
74 root SW< [ksed]
75 root SW [ksechanged]
77 root SW [gpio_out_pulse]
78 root SW [button_notify_u]
106 root SW< [raid1d]
111 root SW< [raid1d]
114 root SW [kreiserfsd]
173 root 3600 S syslogd -R 255.255.255.255
175 root 3552 S klogd
177 root 11020 S httpd 80 y
179 root 11020 S httpd 8080 share_browsing
185 root 4880 S upnp -D -L br0 -W eth0
195 root 1880 S udhcpd /tmp/udhcpd_lan.conf
199 root 2188 S dnsmasq -i br0 -r /tmp/resolv.conf
209 root 8520 S /usr/local/samba/sbin/smbd
219 root 1856 S udhcpc -i eth0 -p /var/run/udhcpc.pid -s /tmp/udhcpc
224 root 6792 S /usr/local/samba/sbin/nmbd
228 root 5072 S vsftpd /etc/vsftpd.conf
244 root 8520 S /usr/local/samba/sbin/smbd
259 root 5824 S waveservermain
261 root 5824 S rcamdmain
262 root 4808 S infosvr br0
263 root 5832 S watchdog
275 root 5824 S usbcopymain
490 root 3172 S thttpd -d /shares/MYVOLUME1/MYSHARE1/web -c ** -p 808
492 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
500 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
504 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
506 root 6748 S dms /shares/DMSRoot WL700gE 00:1B:FC:22:43:FA
515 root 3468 S ./dmathined /shares/MYVOLUME1/MYSHARE1 2
518 root 3076 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
519 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
521 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
522 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
525 root 5732 S giftd --home-dir=/shares/MYVOLUME1/MYSHARE1/Download
534 root 8044 S mt-daapd -c /tmp/mt-daapd.conf -s WL700gE
543 guest 9128 S < /usr/local/samba/sbin/smbd
575 root 2164 S utelnetd -d -i br0
582 root 1364 S /opt/sbin/dropbear
612 root 1444 S /opt/sbin/dropbear
613 root 2024 S -bash
625 root 2132 S -bash
628 root 1876 S ./twonkymedia
629 root 23472 S ./twonkymediaserver
630 root 23472 S ./twonkymediaserver
631 root 23472 S ./twonkymediaserver
632 root 23472 S ./twonkymediaserver
633 root 23472 S ./twonkymediaserver
634 root 23472 S ./twonkymediaserver
635 root 23472 S ./twonkymediaserver
636 root 23472 S ./twonkymediaserver
637 root 23472 S ./twonkymediaserver
638 root 23472 S ./twonkymediaserver
640 root 23472 R ./twonkymediaserver
648 root 23472 S ./twonkymediaserver
649 root 1792 R ps
[root@WL700gE twonkymedia]$
[root@WL700gE twonkymedia]$

so how do i modify te rc.local the correct way i tried, the code what was posted but with no luck.....

Gegroet Rick.

[mumsoft]

Hi Rick,

To start Twonky automatically, you must start it before changing libraries in rc.local. So here is the first part of my rc.local

#!/opt/bin/bash

#############
# Get nvram variables
#############
pool=`nvram get apps_pool`
share=`nvram get apps_share`
kc_spin_down_hdd=`nvram get kc_spin_down_hdd`

#############
# Misc defines
#############
internal_hdd=/dev/ide/host2/bus0/target0/lun0/disc

#############
# These items only run once at power up
#############
if [ ! -f /tmp/rc.local.done ]; then

 #Start Twonkymedia, werkt met originele library_path
 /opt/share/TwonkyMedia/twonkymedia &

 export PATH=/opt/bin:/opt/sbin:/bin:/sbin:/usr/bin:/usr/sbin
 export LD_LIBRARY_PATH=/opt/lib:/apps/lib:/apps/usr/gift-nasoc/lib
 export KCSHELL=/opt/bin/bash

This works for me, you must adjust the directory for Twonky to your setup, Linux is case sensitive.

Good luck,
Marc

[Rick]

oke thx..
i`ll give this a try but for now i will leave it as its is am happy the router is finally working correct , with twonky.
so the next challenge i am facing is installing SABnzb.
Hope everything goes as told on :

http://wl700g.homelinux.net/portal/content/view/44/30/

Greetings. Rick

[Rick]

I have set my router to WAN Acces.
but to day i saw in my log file :

Apr 10 06:02:05 dropbear[1172]: exit before auth: Disconnect received
Apr 10 06:02:06 dropbear[1173]: login attempt for nonexistent user from 194.169.227.233:41438
Apr 10 06:02:07 dropbear[1173]: exit before auth: Disconnect received
Apr 10 06:02:08 dropbear[1174]: login attempt for nonexistent user from 194.169.227.233:41649

etc. etc etc.

does this means some is trying to login in to my router, at random port numbers ????
because there are several attemps with diffrent port numbers.

greetings Rick

[gingishan1]

This is what i get. Can someone please tell me what it means?

Apr 13 06:34:20 dropbear[9718]: Child connection from 202.100.82.230:57558
Apr 13 06:34:30 dropbear[9718]: exit before auth: Failed to get remote version
Apr 13 06:40:59 dropbear[9731]: Child connection from 202.100.82.230:60421
Apr 13 06:41:02 dropbear[9732]: Child connection from 202.100.82.230:60514
Apr 13 06:41:05 dropbear[9733]: Child connection from 202.100.82.230:60663
Apr 13 06:41:05 dropbear[9731]: bad password attempt for 'root' from 202.100.82.230:60421
Apr 13 06:41:07 dropbear[9731]: exit before auth (user 'root', 1 fails): Disconnect received
Apr 13 06:41:07 dropbear[9734]: Child connection from 202.100.82.230:60803
Apr 13 06:41:08 dropbear[9735]: Child connection from 202.100.82.230:60837
Apr 13 06:41:11 dropbear[9738]: Child connection from 202.100.82.230:32840
Apr 13 06:41:12 dropbear[9732]: exit before auth: Exited normally
Apr 13 06:41:13 dropbear[9735]: bad password attempt for 'root' from 202.100.82.230:60837
Apr 13 06:41:13 dropbear[9735]: exit before auth (user 'root', 1 fails): Disconnect received
Apr 13 06:41:14 dropbear[9739]: Child connection from 202.100.82.230:33101
Apr 13 06:41:15 dropbear[9734]: bad password attempt for 'root' from 202.100.82.230:60803
Apr 13 06:41:16 dropbear[9733]: exit before auth: Failed to get remote version
Apr 13 06:41:16 dropbear[9734]: exit before auth (user 'root', 1 fails): Disconnect received
Apr 13 06:41:17 dropbear[9740]: Child connection from 202.100.82.230:33370
Apr 13 06:41:17 dropbear[9741]: Child connection from 202.100.82.230:33402
Apr 13 06:41:18 dropbear[9742]: Child connection from 202.100.82.230:33093
Apr 13 06:41:19 dropbear[9739]: bad password attempt for 'root' from 202.100.82.230:33101
Apr 13 06:41:20 dropbear[9739]: exit before auth (user 'root', 1 fails): Disconnect received
Apr 13 06:41:20 dropbear[9743]: Child connection from 202.100.82.230:33708
Apr 13 06:41:22 dropbear[9738]: exit before auth: Failed to get remote version
Apr 13 06:41:22 dropbear[9741]: login attempt for nonexistent user from 202.100.82.230:33402
Apr 13 06:41:23 dropbear[9741]: exit before auth: Disconnect received
Apr 13 06:41:23 dropbear[9744]: Child connection from 202.100.82.230:34076
Apr 13 06:41:25 dropbear[9740]: bad password attempt for 'root' from 202.100.82.230:33370
Apr 13 06:41:26 dropbear[9745]: Child connection from 202.100.82.230:34422
Apr 13 06:41:27 dropbear[9740]: exit before auth (user 'root', 1 fails): Exited normally
Apr 13 06:41:28 dropbear[9746]: Child connection from 202.100.82.230:34183
Apr 13 06:41:29 dropbear[9743]: login attempt for nonexistent user from 202.100.82.230:33708
Apr 13 06:41:30 dropbear[9743]: exit before auth: Exited normally
Apr 13 06:41:32 dropbear[9747]: Child connection from 202.100.82.230:35189
Apr 13 06:41:33 dropbear[9746]: login attempt for nonexistent user from 202.100.82.230:34183
Apr 13 06:41:34 dropbear[9744]: exit before auth: Failed to get remote version
Apr 13 06:41:34 dropbear[9746]: exit before auth: Exited normally
Apr 13 06:41:35 dropbear[9748]: Child connection from 202.100.82.230:35582
Apr 13 06:41:37 dropbear[9745]: exit before auth: Failed to get remote version
Apr 13 06:41:39 dropbear[9749]: Child connection from 202.100.82.230:35970
Apr 13 06:41:39 dropbear[9742]: exit before auth: Failed to get remote version
Apr 13 06:41:42 dropbear[9748]: login attempt for nonexistent user from 202.100.82.230:35582
Apr 13 06:41:43 dropbear[9747]: exit before auth: Failed to get remote version
Apr 13 06:41:43 dropbear[9748]: exit before auth: Disconnect received
Apr 13 06:41:44 dropbear[9749]: login attempt for nonexistent user from 202.100.82.230:35970
Apr 13 06:41:44 dropbear[9752]: Child connection from 202.100.82.230:36634
Apr 13 06:41:45 dropbear[9753]: Child connection from 202.100.82.230:36358
Apr 13 06:41:45 dropbear[9749]: exit before auth: Disconnect received
Apr 13 06:41:45 dropbear[9754]: Child connection from 202.100.82.230:36768
Apr 13 06:41:45 dropbear[9755]: Child connection from 202.100.82.230:36888
Apr 13 06:41:48 dropbear[9756]: Child connection from 202.100.82.230:37160
Apr 13 06:41:49 dropbear[9752]: login attempt for nonexistent user from 202.100.82.230:36634
Apr 13 06:41:50 dropbear[9752]: exit before auth: Disconnect received
Apr 13 06:41:51 dropbear[9758]: Child connection from 202.100.82.230:37511
Apr 13 06:41:51 dropbear[9754]: login attempt for nonexistent user from 202.100.82.230:36768
Apr 13 06:41:52 dropbear[9754]: exit before auth: Disconnect received
Apr 13 06:41:53 dropbear[9759]: Child connection from 202.100.82.230:37805
Apr 13 06:41:53 dropbear[9753]: exit before auth: Exited normally
Apr 13 06:41:54 dropbear[9760]: Child connection from 202.100.82.230:37928
Apr 13 06:41:58 dropbear[9759]: login attempt for nonexistent user from 202.100.82.230:37805
Apr 13 06:41:59 dropbear[9759]: exit before auth: Disconnect received
Apr 13 06:42:00 dropbear[9761]: Child connection from 202.100.82.230:38663
Apr 13 06:42:06 dropbear[9755]: exit before auth: Failed to get remote version
Apr 13 06:42:08 dropbear[9756]: exit before auth: Failed to get remote version
Apr 13 06:42:10 dropbear[9762]: Child connection from 202.100.82.230:39878
Apr 13 06:42:10 dropbear[9763]: Child connection from 202.100.82.230:39485
Apr 13 06:42:11 dropbear[9758]: exit before auth: Failed to get remote version
Apr 13 06:42:13 dropbear[9764]: Child connection from 202.100.82.230:40255
Apr 13 06:42:16 dropbear[9760]: exit before auth: Failed to get remote version
Apr 13 06:42:16 dropbear[9762]: login attempt for nonexistent user from 202.100.82.230:39878
Apr 13 06:42:17 dropbear[9762]: exit before auth: Disconnect received
Apr 13 06:42:17 dropbear[9763]: exit before auth: Exited normally
Apr 13 06:42:19 dropbear[9766]: Child connection from 202.100.82.230:41018
Apr 13 06:42:20 dropbear[9767]: Child connection from 202.100.82.230:40915
Apr 13 06:42:21 dropbear[9761]: exit before auth: Failed to get remote version
Apr 13 06:42:22 dropbear[9768]: Child connection from 202.100.82.230:41428
Apr 13 06:42:28 dropbear[9769]: Child connection from 202.100.82.230:41796
Apr 13 06:42:28 dropbear[9767]: exit before auth: Exited normally
Apr 13 06:42:31 dropbear[9770]: Child connection from 202.100.82.230:42568
Apr 13 06:42:32 dropbear[9768]: exit before auth: Failed to get remote version
Apr 13 06:42:33 dropbear[9764]: exit before auth: Failed to get remote version
Apr 13 06:42:34 dropbear[9771]: Child connection from 202.100.82.230:42962
Apr 13 06:42:37 dropbear[9772]: Child connection from 202.100.82.230:43336
Apr 13 06:42:39 dropbear[9769]: exit before auth: Failed to get remote version
Apr 13 06:42:39 dropbear[9771]: login attempt for nonexistent user from 202.100.82.230:42962
Apr 13 06:42:40 dropbear[9771]: exit before auth: Disconnect received
Apr 13 06:42:40 dropbear[9773]: Child connection from 202.100.82.230:43719
Apr 13 06:42:40 dropbear[9774]: Child connection from 202.100.82.230:43798
Apr 13 06:42:41 dropbear[9770]: exit before auth: Exited normally
Apr 13 06:42:43 dropbear[9775]: Child connection from 202.100.82.230:44109
Apr 13 06:42:44 dropbear[9772]: login attempt for nonexistent user from 202.100.82.230:43336
Apr 13 06:42:45 dropbear[9772]: exit before auth: Disconnect received
Apr 13 06:42:46 dropbear[9776]: Child connection from 202.100.82.230:44434
Apr 13 06:42:49 dropbear[9766]: exit before auth: Failed to get remote version
Apr 13 06:42:49 dropbear[9777]: Child connection from 202.100.82.230:44874
Apr 13 06:42:50 dropbear[9773]: exit before auth: Failed to get remote version
Apr 13 06:42:51 dropbear[9774]: exit before auth: Failed to get remote version
Apr 13 06:42:52 dropbear[9778]: Child connection from 202.100.82.230:45255
Apr 13 06:42:54 dropbear[9775]: exit before auth: Failed to get remote version
Apr 13 06:42:56 dropbear[9779]: Child connection from 202.100.82.230:45637
Apr 13 06:42:57 dropbear[9776]: exit before auth: Failed to get remote version
Apr 13 06:42:59 dropbear[9780]: Child connection from 202.100.82.230:45992
Apr 13 06:43:02 dropbear[9781]: Child connection from 202.100.82.230:46380
Apr 13 06:43:04 dropbear[9778]: exit before auth: Exited normally
Apr 13 06:43:05 dropbear[9783]: Child connection from 202.100.82.230:46757
Apr 13 06:43:10 dropbear[9780]: exit before auth: Exited normally
Apr 13 06:43:14 dropbear[9784]: Child connection from 202.100.82.230:47544
Apr 13 06:43:16 dropbear[9779]: exit before auth: Failed to get remote version
Apr 13 06:43:17 dropbear[9785]: Child connection from 202.100.82.230:48299
Apr 13 06:43:20 dropbear[9777]: exit before auth: Failed to get remote version
Apr 13 06:43:20 dropbear[9786]: Child connection from 202.100.82.230:48653
Apr 13 06:43:22 dropbear[9781]: exit before auth: Failed to get remote version
Apr 13 06:43:23 dropbear[9787]: Child connection from 202.100.82.230:49069
Apr 13 06:43:25 dropbear[9784]: exit before auth: Failed to get remote version
Apr 13 06:43:29 dropbear[9787]: bad password attempt for 'root' from 202.100.82.230:49069
Apr 13 06:43:29 dropbear[9788]: Child connection from 202.100.82.230:49445
Apr 13 06:43:30 dropbear[9787]: exit before auth (user 'root', 1 fails): Disconnect received
Apr 13 06:43:31 dropbear[9786]: exit before auth: Failed to get remote version
Apr 13 06:43:33 dropbear[9789]: Child connection from 202.100.82.230:50240
Apr 13 06:43:34 dropbear[9790]: Child connection from 202.100.82.230:50029
Apr 13 06:43:36 dropbear[9783]: exit before auth: Failed to get remote version
Apr 13 06:43:38 dropbear[9785]: exit before auth: Failed to get remote version
Apr 13 06:43:39 dropbear[9791]: Child connection from 202.100.82.230:50633
Apr 13 06:43:41 dropbear[9790]: exit before auth: Exited normally

Thanks in advance.

[mumsoft]

Could you do some investigation yourself?

Maybe login with ssh and try a random password for root, what does the log then say?
Maybe you could conclude then that someone evil is trying to get in!

Maybe you could edit your loooooooong quote a bit and make it shrtr.

Marc

[Gizmo1007]

gingishan1

Your being Hacked.
Happens a lot.
Ensure you keep dropbear with password on and look at settings for your VSFTPD sometimes they will try to get in that way as well.
If your additionally worried install fail2ban as an additional measure.

[Ford]

I want to start Dovecot automatic at boot up.
How can I do that in rc.local.
I tryed this several times, different ways but it won't start.
When I start Dovecot manual it works fine.
Someone there who can help me.

Gr. Ronald

[kfurge]

I want to start Dovecot automatic at boot up.
How can I do that in rc.local.
I tryed this several times, different ways but it won't start.
When I start Dovecot manual it works fine.
Someone there who can help me?

Two things generally are to blame for startup failures in rc.local:

1) Either your PATH, or some other environment variable, is not properly configured. Make sure all the environment matches the one your have when you login.

2) The busybox shell which executes rc.local is not able to execute the startup script for the program. Add this line to rc.local prior to executing the startup script for your application: "export KCSHELL=/opt/bin/bash". This will use bash instead of the busybox shell for every instance of /bin/sh.

- K.C.

[Ford]

Thanks KC for your answer.
But it don`t work this way.
Is there maybe an other way to start Dovecot automatic.

[Payton]

"ipkg update" will not work for me. (WL700gE_kc_1078_02.nas)
I will install the syslog-ng, please help!

THX

[LeperKing]

"ipkg update" will not work for me. (WL700gE_kc_1078_02.nas)
I will install the syslog-ng, please help!

THX

What's the error message?

LK