Just to clarify: there two 300Mhz entries in the bootloader table. It will use first (300,133) if you does not specify bus speed. Unfortunately there seems to be a bug in the bootloader which is preventing 300/133 to run properly, so we choose second entry 300,150 which works fine on most routers. As opposite, 264Mhz entry is the only one in the bootloader table.
sure: http://wpte.kicks-ass.net/forum/view...hp?thread_id=8
Keep an eye on the temperature tho... asus underclocked the router for thermal reasons
Hello,
I read few threads about OC W500gP, but WL500W has different CPU - BCM4704 (default running at 266MHz). As we can read at Broadcom WWW BCM4704 is 300MHz CPU.
There is simple way to change CPU's freq using nvram command (additionally I want add heatsink and small fan to better air flow).
What about FSB of memory? If I think properly, when CPU is clocked at 266MHz there is 133MHz on memory. Can I setor I must setCode:clkfreq=300,133Best regardsCode:clkfreq=300,150
the following applies to wl500gpv1 & wl500w:
http://wl500g.info/showthread.php?t=12546