Found the answer here :
http://wl500g.info/showthread.php?t=...ghlight=usblp1
but where du i put the commands so the router starts them each time it boots ?
/smirge
Is this possible ?
I have a Samsung ML-1710p laser printer which works nicely
I have a Canon MP 530 which also works in the router
but not both of them plugged in the router - then only the one in the bottom USB slot works ?
It would be nice to have them both working in netperint
/smirge
Found the answer here :
http://wl500g.info/showthread.php?t=...ghlight=usblp1
but where du i put the commands so the router starts them each time it boots ?
/smirge
/usr/local/sbin/post-boot is a good place
i have no such dir
only a /usr/local/root
i do hav a /usr/sbin but no post-boot in that dir...
/smirge
OK
1) do you have Oleg's fw?
2) if no --- install it, becuse original one will not let you to do what you want
3) anyway you need to go through a tutorial on initial setup (either wengi's or marcnesium's), because this directory and the files in it should be created manually