Universal Card Reader USB 2.0

**nazariy** · 01-01-2008, 15:05

C novum Godom Vas!
Eto moi 1º Thread

Thx you Oleg for your great work!!!!!
ia imey odny problemy, pary nedel tomy nazad kypil USB Card Reader USB2.0 i v xate imey SD Card 1GB.
Proshul z novum Firmware i kogda vsynyl Card Reader USB (CRU) to mne poiavilsia etot log:

Code:

Dec 30 23:05:18 kernel: hub.c: new USB device 01:03.2-2, assigned address 4
Dec 30 23:05:22 kernel: Device not ready.  Make sure there is a disc in the drive.
Dec 30 23:05:22 kernel: sda : READ CAPACITY failed.
Dec 30 23:05:22 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Dec 30 23:05:22 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Dec 30 23:05:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Dec 30 23:05:22 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Dec 30 23:05:22 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel: Device not ready.  Make sure there is a disc in the drive.
Dec 30 23:05:22 kernel: sda : READ CAPACITY failed.
Dec 30 23:05:22 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Dec 30 23:05:22 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Dec 30 23:05:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Dec 30 23:05:22 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Dec 30 23:05:22 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  unable to read partition table
Dec 30 23:05:22 kernel: Device not ready.  Make sure there is a disc in the drive.
Dec 30 23:05:22 kernel: sda : READ CAPACITY failed.
Dec 30 23:05:22 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Dec 30 23:05:22 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Dec 30 23:05:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Dec 30 23:05:22 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Dec 30 23:05:22 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  unable to read partition table
Dec 30 23:05:22 kernel: Device not ready.  Make sure there is a disc in the drive.
Dec 30 23:05:22 kernel: sda : READ CAPACITY failed.
Dec 30 23:05:22 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Dec 30 23:05:22 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Dec 30 23:05:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Dec 30 23:05:22 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Dec 30 23:05:22 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  unable to read partition table
Dec 30 23:05:22 kernel: Device not ready.  Make sure there is a disc in the drive.
Dec 30 23:05:22 kernel: sda : READ CAPACITY failed.
Dec 30 23:05:22 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Dec 30 23:05:22 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Dec 30 23:05:22 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Dec 30 23:05:22 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Dec 30 23:05:22 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  I/O error: dev 08:00, sector 0
Dec 30 23:05:22 kernel:  unable to read partition table

SD card ne zablokovana.
Xto nebyd znaet sho za problema?
ia dymay sho problema v CRU

Izveniti za latim i za moy ploxoi Ryskiy
Thx you

**ABATAPA** · 01-01-2008, 22:23

Originally Posted by nazariy

C novum Godom Vas!

Ñïàñèáî!

Originally Posted by nazariy

Dec 30 23:05:22 kernel: /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0

Êàðòà îïðåäåëèëàñü, íî íå ÷èòàåòñÿ. Âîçìîæíî, card-reader íå ðàáîòàåò ïðàâèëüíî.
Ïîïðîáóéòå äðóãóþ êàðòó (ìîæåò áûòü, íå SD) â ýòîì card-reader.

Originally Posted by nazariy

Izveniti za latim i za moy ploxoi Ryskiy
Thx you

Íî Âû ñòàðàëèñü.

Íå âñå äàæå èç íàñ â ñîâåðøåíñòâå çíàþò íå òîëüêî äðóãèå, íî è ñâîé ÿçûê. Ê ñîæàëåíèþ.

**nazariy** · 03-01-2008, 15:38

и --> i
ы --> u

Originally Posted by ABATAPA

Êàðòà îïðåäåëèëàñü, íî íå ÷èòàåòñÿ. Âîçìîæíî, card-reader íå ðàáîòàåò ïðàâèëüíî.
Ïîïðîáóéòå äðóãóþ êàðòó (ìîæåò áûòü, íå SD) â ýòîì card-reader.

Spasubo za repost

k sojaleny ia tolko imey kartu SD (2x32MB, 1x512SD, 1x1GB) probuval s 512 e s 32, probuval format ext3, ext2, fat, fat32 no on ne xochet rabotat

Code:

Jan  3 15:05:31 kernel: usb.c: USB disconnect on device 01:03.2-2 address 5
Jan  3 15:05:47 kernel: hub.c: new USB device 01:03.2-1, assigned address 6
Jan  3 15:05:53 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:05:53 kernel: sda : READ CAPACITY failed.
Jan  3 15:05:53 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:05:53 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:05:53 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:05:53 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:05:53 kernel: sda : READ CAPACITY failed.
Jan  3 15:05:53 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:05:53 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:05:53 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:05:53 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  unable to read partition table
Jan  3 15:05:53 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:05:53 kernel: sda : READ CAPACITY failed.
Jan  3 15:05:53 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:05:53 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:05:53 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:05:53 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  unable to read partition table
Jan  3 15:05:53 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:05:53 kernel: sda : READ CAPACITY failed.
Jan  3 15:05:53 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:05:53 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:05:53 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:05:53 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  unable to read partition table
Jan  3 15:05:53 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:05:53 kernel: sda : READ CAPACITY failed.
Jan  3 15:05:53 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:05:53 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:05:53 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:05:53 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:05:53 kernel:  unable to read partition table

y menia est vopros, pochemy

Code:

Jan  3 15:05:53 kernel: sda : block size assumed to be 512 bytes, disk size 1GB. :eek:

eto z kartku 521MB

, e s 32MB on pushet toje samoe

any help? ia dymay wto bydy kypliat normal USB drive

Vsem spasibo

EDIT:
Moi Card Driver: Card reader Zmate 6in1 http://www.fotoring.fi/prod_images/b...95974287b1.jpg

a takje nashol etot post, http://wl500g.info/showthread.php?t=...ht=card+reader k sojaleniy yje zabyl nemeckiy

izvinite za typoi vopras, no eto mne mojet pomoch?

Code:

if [ ! -d /dev/discs ]; then
   insmod scsi_mod && insmod sd_mod && insmod usb-storage && sleep 5s
fi

**zap** · 03-01-2008, 15:52

Ñòàðîå ÿäðî (â ñìûñëå 2.4), êîòîðîå â ðîóòåðå ñ íåêîòîðûìè êàðä-ðèäåðàìè êàê ðàç âîò òàê ñåáÿ âåëî. Âî-ïåðâûõ ñîçäàþòñÿ N scsi äèñêîâ, ãäå N - êîëè÷åñòâî äûðîê â óñòðîéñòâå (îáû÷íî 2 èëè 4), çàòåì îí, äóìàÿ ÷òî âñå ýòè äèñêè óæå ïîäêëþ÷åíû, äåëàåò ïîïûòêó îïðåäåëèòü ïàðàìåòðû ýòèõ äèñêîâ.

Êîãäà íè÷åãî ñ íèõ ñ÷èòàòü íå óäà¸òñÿ, îí 'îò áàëäû' áåð¸ò ðàçìåð â 1 ãèãàáàéò è íàçíà÷àåò ýòèì äèñêàì. Ýòè ðàçìåðû, êñòàòè, ìîæíî óâèäåòü ïî êîìàíäå 'cat /proc/partitions'.

Ïîïðîáóéòå ñëåäóþùåå:

1. Âñòàâüòå ðèäåð â USB ïîðò, çàòåì íà ðîóòåðå çàïóñòèòå êîìàíäó:

tail -f /tmp/syslog.log

ïîñëå ýòîãî âñòàâüòå êàðòî÷êó â ðèäåð. Åñëè ïðè ýòîì â ëîãå íå ïîÿâèòñÿ íèêàêèõ íàäïèñåé, çíà÷èò âòûêàíèå êàðòî÷êå íà õîäó ðàáîòàòü íå áóäåò. Âîîáùå ãîâîðÿ, â 'áîëüøèõ' ëèíóêñàõ äëÿ ýòîãî åñòü ñïåöèàëüíûé äåìîí (HAL daemon), êîòîðûé ðàç â ñåêóíäó îïðàøèâàåò òàêèå äèñêè, ÷òîáû ïîíÿòü, íå ïîÿâèëàñü ëè òàì êàðòî÷êà. Â ðîóòåðå òàêîé ïðîãðàììû íåò, íî íåêîòîðûå ðèäåðû êàðòî÷åê äîñòàòî÷íî óìíû, ÷òîáû ñàìè ñäåëàòü âñ¸ ÷òî íàäî.

2. Èíà÷å åäèíñòâåííîå, ÷òî Âàì îñòà¸òñÿ - âñòàâëÿòü â USB ïîðò ðèäåð ñðàçó ñ âîòêíóòîé êàðòî÷êîé. Ïðè èíèöèàëèçàöèè óñòðîéñòâà äðàéâåð îïðîñèò âñå ñëîòû óñòðîéñòâà, â êàêèõ-òî èç íèõ íàéä¸ò êàðòî÷êè è èíèöèàëèçèðóåò èõ. Òî åñòü äèíàìè÷åñêîãî îáíîâëåíèÿ ñïèñêà êàðòî÷åê ïðè òàêèõ óñëîâèÿõ íå ïîëó÷èòñÿ.

**nazariy** · 03-01-2008, 16:11

Originally Posted by zap

Ñòàðîå ÿäðî (â ñìûñëå 2.4), êîòîðîå â ðîóòåðå ñ íåêîòîðûìè êàðä-ðèäåðàìè êàê ðàç âîò òàê ñåáÿ âåëî. Âî-ïåðâûõ ñîçäàþòñÿ N scsi äèñêîâ, ãäå N - êîëè÷åñòâî äûðîê â óñòðîéñòâå (îáû÷íî 2 èëè 4), çàòåì îí, äóìàÿ ÷òî âñå ýòè äèñêè óæå ïîäêëþ÷åíû, äåëàåò ïîïûòêó îïðåäåëèòü ïàðàìåòðû ýòèõ äèñêîâ.

Êîãäà íè÷åãî ñ íèõ ñ÷èòàòü íå óäà¸òñÿ, îí 'îò áàëäû' áåð¸ò ðàçìåð â 1 ãèãàáàéò è íàçíà÷àåò ýòèì äèñêàì. Ýòè ðàçìåðû, êñòàòè, ìîæíî óâèäåòü ïî êîìàíäå 'cat /proc/partitions'.

Ïîïðîáóéòå ñëåäóþùåå:

1. Âñòàâüòå ðèäåð â USB ïîðò, çàòåì íà ðîóòåðå çàïóñòèòå êîìàíäó:

tail -f /tmp/syslog.log

ïîñëå ýòîãî âñòàâüòå êàðòî÷êó â ðèäåð. Åñëè ïðè ýòîì â ëîãå íå ïîÿâèòñÿ íèêàêèõ íàäïèñåé, çíà÷èò âòûêàíèå êàðòî÷êå íà õîäó ðàáîòàòü íå áóäåò. Âîîáùå ãîâîðÿ, â 'áîëüøèõ' ëèíóêñàõ äëÿ ýòîãî åñòü ñïåöèàëüíûé äåìîí (HAL daemon), êîòîðûé ðàç â ñåêóíäó îïðàøèâàåò òàêèå äèñêè, ÷òîáû ïîíÿòü, íå ïîÿâèëàñü ëè òàì êàðòî÷êà. Â ðîóòåðå òàêîé ïðîãðàììû íåò, íî íåêîòîðûå ðèäåðû êàðòî÷åê äîñòàòî÷íî óìíû, ÷òîáû ñàìè ñäåëàòü âñ¸ ÷òî íàäî.

2. Èíà÷å åäèíñòâåííîå, ÷òî Âàì îñòà¸òñÿ - âñòàâëÿòü â USB ïîðò ðèäåð ñðàçó ñ âîòêíóòîé êàðòî÷êîé. Ïðè èíèöèàëèçàöèè óñòðîéñòâà äðàéâåð îïðîñèò âñå ñëîòû óñòðîéñòâà, â êàêèõ-òî èç íèõ íàéä¸ò êàðòî÷êè è èíèöèàëèçèðóåò èõ. Òî åñòü äèíàìè÷åñêîãî îáíîâëåíèÿ ñïèñêà êàðòî÷åê ïðè òàêèõ óñëîâèÿõ íå ïîëó÷èòñÿ.

Spasibo

Ia sdelal tak kak vu skazali (krome komandu tail, potomyshta y menia nety log file v etoi dir.)
vsynyl USB, on dal error

Code:

Jan  3 15:52:00 USB storage: removed
Jan  3 15:52:11 kernel: usb.c: USB disconnect on device 01:03.2-1 address 7
Jan  3 15:52:27 kernel: hub.c: new USB device 01:03.2-2, assigned address 8
Jan  3 15:52:33 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:52:33 kernel: sda : READ CAPACITY failed.
Jan  3 15:52:33 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:52:33 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:52:33 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:52:33 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:52:33 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:52:33 kernel: sda : READ CAPACITY failed.
Jan  3 15:52:33 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:52:33 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:52:33 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:52:33 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:52:33 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  unable to read partition table
Jan  3 15:52:33 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:52:33 kernel: sda : READ CAPACITY failed.
Jan  3 15:52:33 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:52:33 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:52:33 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:52:33 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:52:33 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  unable to read partition table
Jan  3 15:52:33 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:52:33 kernel: sda : READ CAPACITY failed.
Jan  3 15:52:33 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:52:33 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:52:33 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:52:33 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:52:33 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  unable to read partition table
Jan  3 15:52:33 kernel: Device not ready.  Make sure there is a disc in the drive.
Jan  3 15:52:33 kernel: sda : READ CAPACITY failed.
Jan  3 15:52:33 kernel: sda : status = 1, message = 00, host = 0, driver = 08 
Jan  3 15:52:33 kernel: Info fld=0xa00 (nonstd), Current sd00:00: sns = 70  2
Jan  3 15:52:33 kernel: Raw sense data:0x70 0x00 0x02 0x00 0x00 0x0a 0x00 0x00 
Jan  3 15:52:33 kernel: sda : block size assumed to be 512 bytes, disk size 1GB.  
Jan  3 15:52:33 kernel:  /dev/scsi/host1/bus0/target0/lun0: I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  I/O error: dev 08:00, sector 0
Jan  3 15:52:33 kernel:  unable to read partition table

potom vsynyl SD Card (512 FAT32 e 32 s ext2) no nichevo ne poiavilos v log file.
Nikogda ne lybil sdavatsia s linuxom no vijy sho etot kard reader tolko dlia computerov

, da i cena normalnux USB yje 12euro ->2GB
No ia isho ne zdays

esli kto to imeet kakyy nibyt idey, mojete govorit

**zap** · 03-01-2008, 16:45

À ÷òî âûäà¸ò cat /proc/bus/usb/devices ?
Ïîñìîòðþ â íîâûõ ÿäðàõ, íåò ëè workaround'îâ íà ýòî óñòðîéñòâî...

**nazariy** · 03-01-2008, 17:01

Originally Posted by zap

À ÷òî âûäà¸ò cat /proc/bus/usb/devices ?
Ïîñìîòðþ â íîâûõ ÿäðàõ, íåò ëè workaround'îâ íà ýòî óñòðîéñòâî...

Ochen velukoe SPACIBO, za to cho tratite svoi chas, shtob mne pomoch

cat output:

Code:

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.04
S:  Manufacturer=Linux 2.4.20 ehci_hcd
S:  Product=PCI device 1106:3104
S:  SerialNumber=01:03.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  8 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=090c ProdID=6000 Rev= 1.00
S:  Manufacturer=Generic       ,   .
S:  Product=USB2.0 Card Reader
S:  SerialNumber=12345678901234567890
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=120
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=100
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms

hmm...on evo yvidil

Code:

S:  Manufacturer=Generic
S:  Product=USB2.0 Card Reader
S:  SerialNumber=12345678901234567890
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

no ne xochet rabotat

**Oleg** · 03-01-2008, 20:48

ß áû ïîðåêîìåíäîâàë ïîïðîáîâàòü ïîñëåäíþþ ìîþ ïðîøèâêó èç ïðåâüþ. Òàì þñá-ñòîðàäæ ïîðÿäêîì îáíîâë¸í. Ìîæåò ÷òî-íèáóäü èçìåíèòñÿ...

**zap** · 03-01-2008, 22:43

Àãà, çíà÷èò Vendor=090c ProdID=6000.

Ïîñìîòðåë ñàìîå ñâåæåå ÿäðî 2.6.23.12, íåò òàêîãî óñòðîéñòâà â ñïèñêå 'íåñòàíäàðòíûõ'. Åñòü 090c/1132, ýòî 5-in-1 Card Reader îò ôèðìû Feiya (?). Òàê ÷òî åñòü íàäåæäà, ÷òî ñ áîëåå ñâåæèìè äðàéâåðàìè (ñì. ïîñò Îëåãà) ïàöèåíòó ïîëåã÷àåò

Òåì áîëåå, ÷òî íàñêîëüêî ÿ ïîíÿë, Âû âîîáùå èñïîëüçóåòå äðóãóþ ïðîøèâêó.

**nazariy** · 04-01-2008, 09:37

Ochen vam spacibo
ia tolko shto ponial kakoi ia glypui

po prevuchke sgryzil 1º firmware --> 1.9.2.7-7g a ne 1.9.7.2

OK, idy ispravliat moy oshubky
moi kernel --> 2.4

kogda pereshy firmware postavly zdes rezultat.
thx you

**al37919** · 04-01-2008, 09:42

ýý òîëüêî áåç ãëóïîñòåé --- ïîä ïîñëåäíåé âåðñèåé Îëåã èìåë â âèäó 1.9.2.7-8.8 îòñþäà: http://oleg.wl500g.info/preview/

1.9.7.2 --- ýòî òâîð÷åñòâî àñóñà, êîòîðûé ê ñîæàëåíèþ èñïðàâëÿåò íå âñå ñâîè îøèáêè íàéäåííûå Îëåãîì.

Êåðíåë ó âñåõ 2.4 ïî îáúåêòèâíûì ïðè÷èíàì (íàëè÷èå äðàéâåðîâ)

**nazariy** · 04-01-2008, 21:35

Yje imey poslednyy versiy Firmware -88
no k sojaleniy daot toje samoe error. no inogda vmesto error on pishet:

Code:

Jan  4 21:17:54 kernel: hub.c: new USB device 01:03.2-1, assigned address 2
Jan  4 21:17:55 kernel: scsi0 : SCSI emulation for USB Mass Storage devices

no potom nichevo ne proisxodit.
->df, pokazyet tolko pamiat routera

EDIT:
Ok, v etom slychae nado y4itsia/spomenat delat "Device Driver"

Thread: Universal Card Reader USB 2.0

Thread Tools

Rate This Thread

Display

Universal Card Reader USB 2.0

Similar Threads

linuxrc bug? - WL-500g not booting from usb drive with hub

Unstable boot from USB

7.09 + USB + hotplug

WL-HDD copy data TO a USB Card Reader?

Posting Permissions