Ïîâðåæäåíèå ôàéëîâîé ñèñòåìû íà USB HDD

**vlad2003.73** · 08-04-2008, 10:05

Всем здрасти. Не давно столкнулся с аналогичной проблемой.
Скажу сразу не являюсь офигенным спецом в linyx.
Есть винт wd 500gb используется для торента и в качестве хранилища. Подключен через USB.
Стал зависать торент с сообщением что нет места надиске (до этого работал месяца четыре без проблем), при этом утилитка (кажется df) показывет что занято только 33%. Через внутреннюю сетку из виндов показывает те же 33%. И из виндов пробовал туда лить файлы, льются без проблем. Пробовал убивать часть закачанных файлов (до занятых 25%) не помогает. Подскажите плиз где хотя бы копать.

. Такое ощущение, что торрент работает только пока свопа хватает.

**Slag** · 12-05-2008, 13:30

Ñòîëêíóëñÿ ñ àíàëîãè÷íîé ïðîáëåìîé.
rtorrent ïåðåñòàë ðàáîòàòü.
Íà äèñêå (WD500Gb MyBook) òðè ðàçäåëà: swap, opt è äëÿ òîððåíòîâ.
Çàïóñêàë e2fsck -f -y -v /dev/discs/disc0/part3
Áûëî ìíîãî multy-claimed blocks. Ìàëåíüêèå ôàéëû e2fsck ÷èíèë ñàì, à íà áîëüøèõ (ñîòíè Ìá) ïîäâèñàë - â òåðìèíàëå íè÷åãî íå ïðîèñõîäèëî, à äèîäû íà äèñêå ïîêàçûâàëè íèçêóþ àêòèâíîñòü. Òîãäà ÿ ðåáóòèë ðîóòåð, óäàëÿë (èëè êîïèðîâàë è óäàëÿë èñõîäíèê) ïðîáëåìíûé ôàéë. Çàòåì çàïóñêàë e2fsck ñíîâà. Â èòîãå ïðîãðàììà äîðàáîòàëà äî êîíöà. Äëÿ ïðîôèëàêòèêè ÿ ïðîãíàë e2fsck -f -y -v åù¸ ðàç.
Çàïóñòèë rtorrent, îí ïîðàáîòàë ÷àñîâ 15 è ñóäÿ ïî âñåìó îïÿòü îòâàëèëñÿ (â äàííûé ìîìåíò íå ìîãó ïðîâåðèòü ïðè÷èíó).
Íà ìîìåíò íà÷àëà ïðîáëåì ðîóòåð ñ äèñêîì ïðîðàáîòàëè 2.5 ìåñÿöà è íàêà÷àëè îêîëî 150Ãá òîððåíòîâ. Äèñê (part3) çàïîëíåí ïðîöåíòîâ íà 40.

Ïàðäîí, äèñê ïîêà ðàáîòàåò íîðìàëüíî. Ýòî áûëî îòêëþ÷åíèå ýëåêòðè÷åñòâà.

**mitxt** · 19-05-2008, 15:15

Ïðèâåò-ïðèâåò.

×óâñòâóþ, ÷òî ó ìåíÿ àíàëîãè÷íàÿ ïðîáëåìà. Ïðèçíàêè ñëåäóùèå:
- windows ïîêàçûâàåò, ÷òî äèñê çàíÿò íà 200 ãá, õîòÿ ðàçìåð ïàïêè íå ïðåâûøàåò 140 ãá;
-ïî÷åìó-òî â ïàïêàõ ñ èìåíåì òîððåíòà îòñóòñòâóåò çàêà÷êà

ò.å. âñ¸ åñòü: è config è stat è torrent, à çàêà÷êè íåòó;
-âðåìåíàìè íå âèäíî ïîäêëþ÷¸ííîãîã æ¸ñòêîãî äèñêà (ïîìîãàåò òîëüêî ïðè¸ì "âûäåðíóë-âä¸ðíóë" â ðîçåòêó.

Õàðàêòåðèñòèêà:
ðîóòåð - 520 GU
õàðä - âíåøíèé, seagate íà 250 gb (ext3)
êëèåíò - transmission

Ñàì ðàáîòàþ ïîä windows. Ñîîòâåòñòâåííî ñ linux íà ïîëíûé ÂÛ. Ìíå âñþ ñèñòåìó äðóã íàñòðàèâàë. ÿ òîëüêî ðòîì è ãëàçàìè õëîïàë.

Òàê âîò. Êàê áû ìíå âûÿñíèòü, êóäà óøëî äèñêîâîå ïðîñòðàííñòâî. È êàê âûòàùèòü òó çàêà÷êó, êîòîðóþ íå âèäíî?

**Joker008** · 23-05-2008, 16:30

Êòî ïîäñêàæåò êàê ðåøèòü ïðîáëåìó.Ïåðåñòàë ìîóíòèòñÿ îäèí ðàçäåë,ïðåäïîëàãàþ èç çà òîððåíòà,ïðîðàáîòàë áîëüøå ìåñÿöà è â÷åðà îòâàëèëñÿ.×òî èìååì:500ãèã äèñê â óñá êîðîáêå ðàçáèò íà 3 ðàçäåëà 1 ñâàï 512ì,âòîðîé îðò 1024ì,è òðåòèé âñå îñòàâøååñÿ ìåñòî(âîò îí è íå ìîóíòèòñÿ) â ëîãå ïèøåò ÷òî òî ïðî áèòûå áëîêè,íî êàê åãî ïðîâåðèòü åñëè åãî ïðèìàóíòèòü íå ïîëó÷àåòñÿ?Ïðîøèâêà 1.9.2.7-9,ôàéëîâàÿ ñèñòåìà åõò3,âîò êóñî÷åê ëîãà

May 23 15:24:38 login[306]: root login on `pts/0'
May 23 15:24:59 kernel: hub.c: new USB device 01:03.2-2, assigned address 3
May 23 15:25:06 kernel: kjournald starting. Commit interval 5 seconds
May 23 15:25:06 kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
May 23 15:25:06 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
May 23 15:25:06 kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 23 15:25:06 USB storage: ext3 fs at /dev/discs/disc0/part2 mounted to /tmp/mnt/disc0_2
May 23 15:25:06 kernel: EXT3-fs error (device sd(8,3)): ext3_check_descriptors: Block bitmap for group 0 not in group (block 2283297391)!
May 23 15:25:06 kernel: EXT3-fs: group descriptors corrupted !

**Novik** · 23-05-2008, 19:12

Originally Posted by Joker008

íî êàê åãî ïðîâåðèòü åñëè åãî ïðèìàóíòèòü íå ïîëó÷àåòñÿ?

Ðàçäåëû íóæíî ïðîâåðÿòü ÒÎËÜÊÎ â íåñìîíòèðîâàííîì ñîñòîÿíèè.
Â Âàøåì ñëó÷àå - òàê:
e2fsck -f /dev/discs/disc0/part3
è, íà âñÿêèé ñëó÷àé,
umount /tmp/mnt/disc0_2
e2fsck -f /dev/discs/disc0/part2
Ò.ê. ÿ ëè÷íî ñîâ÷åì íå óâåðåí, ÷òî ðóãàåòñÿ îíî ó Âàñ íà part3. Ó÷òèòå, ÷òî ñâîï äîëæåí áûòü âêëþ÷åí.

**Joker008** · 24-05-2008, 03:10

Âòîðîé ðàçäåë ïðîâåðèë âñå õîðîøî,à âîò ñ òðåòèì êîìàíäà äîëãî øóðøàëà äèñêîì,÷òî òî êàêèå òî áëîêè ñòèðàëèñü,âîñòàíàâëèâàëèñü äîëãî â îáùåì,ïîòîì â êîíöå âûäàëà ÷òî òî òàì ôàéëåä,ïîíÿë â îáùåì ÷òî òî íå ïîëó÷èëîñü.Òåïåðü ïî ïðåæíåìó ïðè ïåðåçàãðóçêå ìîíòèðóåò òîëüêî 2 ðàçäåë,3 èãíîðèðóåò.Ïî êîìàíäå ôäèñê -ë âèäíû âñå òðè ðàçäåëà,è ëîãå ïðî òðåòèé ðàçäåë íè÷åãî

Jan 1 02:00:04 kernel: usb.c: registered new driver usbdevfs
Jan 1 02:00:04 kernel: usb.c: registered new driver hub
Jan 1 02:00:04 kernel: usb-uhci.c: $Revision: 1.275 $ time 13:26:21 Feb 24 2008
Jan 1 02:00:04 kernel: usb-uhci.c: High bandwidth mode enabled
Jan 1 02:00:04 kernel: PCI: Enabling device 01:03.0 (0000 -> 0001)
Jan 1 02:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x100, IRQ 12
Jan 1 02:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:04 kernel: usb.c: new USB bus registered, assigned bus number 1
Jan 1 02:00:04 kernel: hub.c: USB hub found
Jan 1 02:00:04 kernel: hub.c: 2 ports detected
Jan 1 02:00:04 kernel: PCI: Enabling device 01:03.1 (0000 -> 0001)
Jan 1 02:00:04 kernel: ECHI PCI device 30381106 found.
Jan 1 02:00:04 kernel: UCHI reg 0x41 = 10
Jan 1 02:00:04 kernel: UCHI reg 0x41 changed to = 0
Jan 1 02:00:04 kernel: usb-uhci.c: USB UHCI at I/O 0x120, IRQ 12
Jan 1 02:00:04 kernel: usb-uhci.c: Detected 2 ports
Jan 1 02:00:04 kernel: usb.c: new USB bus registered, assigned bus number 2
Jan 1 02:00:04 kernel: hub.c: USB hub found
Jan 1 02:00:04 kernel: hub.c: 2 ports detected
Jan 1 02:00:04 kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Jan 1 02:00:04 kernel: PCI: Enabling device 01:03.2 (0000 -> 0002)
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: PCI device 1106:3104
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: irq 12, pci mem c00f2000
Jan 1 02:00:04 kernel: usb.c: new USB bus registered, assigned bus number 3
Jan 1 02:00:04 kernel: ECHI PCI device 31041106 found.
Jan 1 02:00:04 kernel: ECHI reg 0x49 = 80010f20
Jan 1 02:00:04 kernel: ECHI reg 0x49 changed to = 80010f00
Jan 1 02:00:04 kernel: ECHI reg 0x4b = 80010f09
Jan 1 02:00:04 kernel: ECHI reg 0x4b changed to = 80010f29
Jan 1 02:00:04 kernel: PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correcting to 32
Jan 1 02:00:04 kernel: ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
Jan 1 02:00:04 kernel: hub.c: USB hub found
Jan 1 02:00:04 kernel: hub.c: 4 ports detected
Jan 1 02:00:05 kernel: usb.c: registered new driver usblp
Jan 1 02:00:05 kernel: printer.c: v0.13: USB Printer Device Class driver
Jan 1 02:00:05 kernel: hub.c: connect-debounce failed, port 1 disabled
Jan 1 02:00:05 dnsmasq[73]: DHCPREQUEST(br0) 192.168.1.5 00:13:02:de:c5:26
Jan 1 02:00:05 dnsmasq[73]: DHCPACK(br0) 192.168.1.5 00:13:02:de:c5:26
Jan 1 02:00:06 kernel: hub.c: new USB device 01:03.2-2, assigned address 2
Jan 1 02:00:06 kernel: usb.c: USB device 2 (vend/prod 0x13fd/0x1650) is not claimed by any active driver.
Jan 1 02:00:06 kernel: usb.c: registered new driver audio
Jan 1 02:00:06 kernel: audio.c: v1.0.0:USB Audio Class driver
Jan 1 02:00:06 kernel: Linux video capture interface: v1.00
Jan 1 02:00:06 kernel: SCSI subsystem driver Revision: 1.00
Jan 1 02:00:06 kernel: hub.c: new USB device 01:03.0-1, assigned address 2
Jan 1 02:00:07 kernel: printer.c: Disabling reads from problem bidirectional printer on usblp0
Jan 1 02:00:07 kernel: printer.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
Jan 1 02:00:07 kernel: printer.c: usblp0 Device ID string [174]='MFG:HEWLETT-PACKARD;MDL

ESKJET 840C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hew lett-Packard DeskJet 840C;SERN:HU0A41T0NCKV;VSTATUS:$XB0$XC0,ff,DN,OFFF ,CUT;VP:0800,FL,B0;'
Jan 1 02:00:07 kernel: Initializing USB Mass Storage driver...
Jan 1 02:00:07 kernel: usb.c: registered new driver usb-storage
Jan 1 02:00:07 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 02:00:07 kernel: Vendor: Initio Model: HD501LJ Rev: 4.36
Jan 1 02:00:07 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jan 1 02:00:07 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 1 02:00:07 kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Jan 1 02:00:07 kernel: Partition check:
Jan 1 02:00:07 kernel: p1 p2 p3
Jan 1 02:00:07 kernel: USB Mass Storage support registered.
Jan 1 02:00:07 kernel: vlan1: Setting MAC address to 00 18 f3 e9 84 66.
Jan 1 02:00:07 kernel: VLAN (vlan1): Underlying device (eth0) has same MAC, not checking promiscious mode.
Jan 1 02:00:07 udhcpc[102]: udhcpc (v0.9.9-pre) started
Jan 1 02:00:08 dnsmasq[73]: read /etc/hosts - 5 addresses
Jan 1 02:00:08 dnsmasq[73]: read /etc/ethers - 4 addresses
Jan 1 02:00:08 dnsmasq[73]: reading /tmp/resolv.conf
Jan 1 02:00:08 dhcp client: deconfig: lease is lost
Jan 1 02:00:08 udhcpc[102]: Lease of xx.xxx.xxx.xxx obtained, lease time 1800
Jan 1 02:00:08 dnsmasq[73]: read /etc/hosts - 5 addresses
Jan 1 02:00:08 dnsmasq[73]: read /etc/ethers - 4 addresses
Jan 1 02:00:08 dnsmasq[73]: reading /tmp/resolv.conf
Jan 1 02:00:08 dnsmasq[73]: using nameserver 212.xxx.xx.xx#53
Jan 1 02:00:08 dnsmasq[73]: using nameserver 212.xxx.xx.xx#53
Jan 1 02:00:08 dnsmasq[73]: using nameserver xx.xxx.3.10#53
Jan 1 02:00:08 dnsmasq[73]: using nameserver 212.xxx.xx.xxx#53
Jan 1 02:00:08 dhcp client: bound IP : xx.xxx.xx.xxx from xx.xxx.xx.xxx
Jan 1 02:00:09 kernel: printer.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-PACKARD;MDL

ESKJET 840C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hew lett-Packard DeskJet 840C;SERN:HU0A41T0NCKV;VSTATUS:$XB0$XC0,ff,DN,OFFF ,CUT;VP:0800,FL,B0;'
Jan 1 02:00:09 kernel: printer.c: Parsing USBLPID...
Jan 1 02:00:18 kernel: kjournald starting. Commit interval 5 seconds
Jan 1 02:00:18 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
Jan 1 02:00:18 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 02:00:18 USB storage: ext3 fs at /dev/discs/disc0/part2 mounted to /tmp/mnt/disc0_2
May 24 04:40:06 ntp client: Synchronizing time with time.nist.gov ...
May 24 04:40:10 login[139]: root login on `pts/0'
May 24 04:40:20 nmbd[135]: [2008/05/24 04:40:20, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(405)
May 24 04:40:20 nmbd[135]: *****
May 24 04:40:20 nmbd[135]:
May 24 04:40:20 nmbd[135]: Samba name server PITERFTP is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1
May 24 04:40:20 nmbd[135]:
May 24 04:40:20 nmbd[135]: *****
May 24 04:42:34 kernel: printer.c: usblp0 Device ID string [174/max 1552]='MFG:HEWLETT-PACKARD;MDL

ESKJET 840C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:Hew lett-Packard DeskJet 840C;SERN:HU0A41T0NCKV;VSTATUS:$XB0$XC0,ff,DN,OFFF ,CUT;VP:0800,FL,B0;'
May 24 04:42:34 kernel: printer.c: Parsing USBLPID...
May 24 04:43:37 dnsmasq[73]: DHCPINFORM(br0) 192.168.1.5 00:13:02:de:c5:26
May 24 04:43:37 dnsmasq[73]: DHCPACK(br0) 192.168.1.5 00:13:02:de:c5:26

**Joker008** · 24-05-2008, 03:44

Íåñêîëüêî ðàç çàïóñêàë êîìàíäó,ðåçóëüòàò òîò æå

[piotr@PiterFTP root]$ e2fsck -f -y -v /dev/discs/disc0/part3
e2fsck 1.38 (30-Jun-2005)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Filesystem contains large files, but lacks LARGE_FILE flag in superblock.
Fix? yes

Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
i_file_acl for inode 12 (...) is 2293117360, should be zero.
Clear? yes

Inode 12 (...) has invalid mode (0115712).
Clear? yes

i_file_acl for inode 14 (...) is 1073222176, should be zero.
Clear? yes

Inode 14 (...) is an illegal character device.
Clear? yes

i_file_acl for inode 16 (...) is 4014045815, should be zero.
Clear? yes

Inode 16 (...) has invalid mode (0131151).
Clear? yes

i_file_acl for inode 18 (...) is 1165933215, should be zero.
Clear? yes

Inode 18 (...) is an illegal socket.
Clear? yes

i_file_acl for inode 19 (...) is 4211979685, should be zero.
Clear? yes

Inode 19 (...) has invalid mode (0134767).
Clear? yes

i_file_acl for inode 20 (...) is 3157978053, should be zero.
Clear? yes

Inode 20 (...) has invalid mode (0152462).
Clear? yes

i_file_acl for inode 21 (...) is 2701693320, should be zero.
Clear? yes

Inode 21 (...) has invalid mode (031676).
Clear? yes

i_file_acl for inode 24 (...) is 2525827505, should be zero.
Clear? yes

Inode 24 (...) has invalid mode (01545).
Clear? yes

i_file_acl for inode 25 (...) is 3070361600, should be zero.
Clear? yes

i_faddr for inode 25 (...) is 1110991856, should be zero.
Clear? yes

i_frag for inode 25 (...) is 9, should be zero.
Clear? yes

i_fsize for inode 25 (...) is 29, should be zero.
Clear? yes

Segmentation fault

**Novik** · 24-05-2008, 09:20

Òàùèòå äèñê íà áîëüøóþ ìàøèíó ñ ëèíóêñîì è ïðîâåðÿéòå òàì. Ïîäêëþ÷àòü æåëàòåëüíî íå ïî USB, à íàïðÿìóþ.
Åñëè íå âûéäåò - ôîðìàòèðóéòå ðàçäåë çàíîâî.

**naves** · 24-05-2008, 16:44

òðè ìåñÿöà çàìå÷àòåëüíî ðàáîòàëî smb, ftp, http íà
asus wl500gp + vipower vpa-35018 (sata to usb) +250Gb HITACHI SATA
è íà÷àëèñü áåçîáðàçèÿ.

Code:

cat /proc/scsi/usb-storage-0/0
   Host scsi0: usb-storage
       Vendor: Sunplus Technology Inc.
      Product: USB to Serial-ATA bridge
Serial Number: HITACHI HD      VFJ104R9394VAK
     Protocol: Transparent SCSI
    Transport: Bulk
         GUID: 04fc0c15f9ff3105b9395fb4
     Attached: Yes

ðàçäåë áûë ïî÷èíåí íà êîìïå ñ ëèíóêñîì:

Code:

   GParted 0.3.3
   Libparted 1.8.7

   Check and repair filesystem (ext3) on /dev/sdb1  01:33:44    ( SUCCES )

   calibrate /dev/sdb1  00:02    ( SUCCES )

        path: /dev/sdb1
        start: 63
        end: 478158659
        size: 478158597 (228.00 GiB)

check filesystem on /dev/sdb1 for errors and (if possible) fix
them  01:33:41    ( SUCCES )

     e2fsck -f -y -v /dev/sdb1

          Pass 1: Checking inodes, blocks, and sizes
          Deleted inode 19808258 has zero dtime. Fix? yes
.................
/dev/sdb1: ***** FILE SYSTEM WAS MODIFIED *****

 139388 inodes used (0.47%)
 18340 non-contiguous inodes (13.2%)
 # of inodes with ind/dind/tind blocks: 48587/8790/0
49454589 blocks used (82.74%)
 0 bad blocks
 2 large files

 124658 regular files
 13345 directories
 0 character device files
 0 block device files
 0 fifos
 570 links
 1370 symbolic links (1370 fast symbolic links)
 6 sockets
--------
 139949 files
 
  e2fsck 1.40.2 (12-Jul-2007)
 
   grow filesystem to fill the partition  00:01    ( SUCCES ) 
      
  resize2fs /dev/sdb1 
      
  resize2fs 1.40.2 (12-Jul-2007)
The filesystem is already 59769824 blocks long. Nothing to do!

ïîñëå ýòîãî âêëþ÷àþ õàðä â ðîóòåð

Code:

May 24 19:04:14 kernel: hub.c: new USB device 01:03.2-2, assigned address 2
May 24 19:04:19 kernel: usb_control/bulk_msg: timeout
May 24 19:04:24 kernel: usb_control/bulk_msg: timeout
May 24 19:04:24 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
May 24 19:04:24 kernel:   Vendor: Hitachi   Model: HDT725025VLA380   Rev:     
May 24 19:04:24 kernel:   Type:   Direct-Access                      ANSI SCSI revision: 02
May 24 19:04:24 kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
May 24 19:04:24 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May 24 19:04:24 kernel: Partition check:
May 24 19:04:24 kernel:  p1 p2
May 24 19:04:34 kernel: VFS: Can't find ext3 filesystem on dev sd(8,0).
May 24 19:04:34 kernel: MSDOS FS: Using codepage 950
May 24 19:04:34 kernel: MSDOS FS: IO charset cp950
May 24 19:04:34 kernel: FAT: bogus logical sector size 36352
May 24 19:04:34 kernel: VFS: Can't find a valid FAT filesystem on dev 08:00.
May 24 19:04:34 kernel: FAT: freeing iocharset=cp950
May 24 19:04:34 kernel: FAT: bogus logical sector size 36352
May 24 19:04:34 kernel: VFS: Can't find a valid FAT filesystem on dev 08:00.
May 24 19:04:34 kernel: kjournald starting.  Commit interval 5 seconds
May 24 19:04:34 kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
May 24 19:04:34 kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 24 19:04:34 USB storage: ext3 fs mounted to /tmp/harddisk 
May 24 19:04:34 kernel: VFS: Can't find ext3 filesystem on dev sd(8,2).
May 24 19:04:34 kernel: MSDOS FS: Using codepage 950
May 24 19:04:34 kernel: MSDOS FS: IO charset cp950
May 24 19:04:34 kernel: FAT: bogus logical sector size 0
May 24 19:04:34 kernel: VFS: Can't find a valid FAT filesystem on dev 08:02.
May 24 19:04:34 kernel: FAT: freeing iocharset=cp950
May 24 19:04:34 kernel: FAT: bogus logical sector size 0
May 24 19:04:34 kernel: VFS: Can't find a valid FAT filesystem on dev 08:02.
May 24 19:04:34 FTP server: daemon is started
May 24 19:04:35 /opt/sbin/cron[212]: (CRON) STARTUP (V5.0)
May 24 19:04:36 thttpd[228]: bind 0.0.0.0 - Address already in use
May 24 19:05:01 /opt/sbin/cron[237]: (root) CMD (run-parts /opt/etc/cron.5mins)
May 24 19:05:05 kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 70000
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 316932104
May 24 19:05:05 kernel: EXT3-fs error (device sd(8,1)): read_inode_bitmap: Cannot read inode bitmap - block_group = 1209, inode_bitmap = 39616513
May 24 19:05:05 kernel: usb.c: USB disconnect on device 01:03.2-2 address 2
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864592
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 328478032
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 0
May 24 19:05:05 kernel: EXT3-fs error (device sd(8,1)) in ext3_new_inode: IO failure
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138674200
May 24 19:05:05 kernel: EXT3-fs error (device sd(8,1)): ext3_get_inode_loc: unable to read inode block - inode=8667192, block=17334275
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 328478032
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 0
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 328478032
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 0
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 12360
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 317722776
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 317722824
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 321920560
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 404495696
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 12456
May 24 19:05:05 kernel: journal_bmap: journal block not found at offset 12 on sd(8,1)
May 24 19:05:05 kernel: Aborting journal on device sd(8,1).
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 12360
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 404495720
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 12368
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 404495720
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: Device 08:01 not ready.
May 24 19:05:05 kernel:  I/O error: dev 08:01, sector 138864648
May 24 19:05:05 kernel: hub.c: new USB device 01:03.2-2, assigned address 3
May 24 19:05:06 smbd[241]: [2008/05/24 19:05:06, 0] smbd/server.c:main(707) 
May 24 19:05:06 smbd[241]:   standard input is not a socket, assuming -D option 
May 24 19:05:06 kernel: Adding Swap: 1052248k swap-space (priority -1)
May 24 19:05:06 USB storage: removed
May 24 19:10:01 /opt/sbin/cron[267]: (root) CMD (run-parts /opt/etc/cron.5mins)
May 24 19:10:36 kernel: ext3_abort called.
May 24 19:10:36 kernel: EXT3-fs abort (device sd(8,1)): ext3_journal_start: Detected aborted journal
May 24 19:10:36 kernel: Remounting filesystem read-only
May 24 19:10:36 kernel: EXT3-fs error (device sd(8,1)) in start_transaction: Journal has aborted

ôàéë post-mount

Code:

#!/bin/sh
/bin/mount -o sync,noatime,rw /dev/discs/disc0/part1 /tmp/harddisk
/bin/mount -o sync,noatime,rw /dev/discs/disc1/part1 /tmp/harddisk

/bin/mount -o bind,sync,noatime,rw /tmp/harddisk/opt /opt
/bin/mount -o bind,sync,noatime,rw /tmp/harddisk/home /home

/opt/etc/init.d/S10cron
/opt/etc/init.d/S80lighttpd start
/opt/etc/init.d/S85proftpd start
smbd
swapon /dev/discs/disc0/part2

òå ïðè ïîäêëþ÷åíèè äèñê ìîíòèðóåòñÿ â /tmp/harddisk, ìîíòèðóåòñÿ /opt /home
íî ïîñëå ïîïûòîê çàïèñè íà íåãî íà÷èíàþòñÿ ïðîáëåìû, è äèñê ïåðåìîíòèðóåòñÿ â ðåæèì òîëüêî äëÿ ÷òåíèÿ...

**vectorm** · 24-05-2008, 19:52

Originally Posted by naves

ôàéë post-mount
Êîä:

#!/bin/sh
/bin/mount -o sync,noatime,rw /dev/discs/disc0/part1 /tmp/harddisk
/bin/mount -o sync,noatime,rw /dev/discs/disc1/part1 /tmp/harddisk

/bin/mount -o bind,sync,noatime,rw /tmp/harddisk/opt /opt
/bin/mount -o bind,sync,noatime,rw /tmp/harddisk/home /home

/opt/etc/init.d/S10cron
/opt/etc/init.d/S80lighttpd start
/opt/etc/init.d/S85proftpd start
smbd
swapon /dev/discs/disc0/part2

òå ïðè ïîäêëþ÷åíèè äèñê ìîíòèðóåòñÿ â /tmp/harddisk, ìîíòèðóåòñÿ /opt /home
íî ïîñëå ïîïûòîê çàïèñè íà íåãî íà÷èíàþòñÿ ïðîáëåìû, è äèñê ïåðåìîíòèðóåòñÿ â ðåæèì òîëüêî äëÿ ÷òåíèÿ...

Ýòî êàê ïîíÿòü???
À âîîáùå - åñëè äèñê îòâàëèâàåòñÿ - çíà÷èò îí ïëîõî ïî÷èíèëñÿ.

**naves** · 25-05-2008, 00:06

ñìûñë ýòèõ äâóõ ñòðî÷åê ÷òî ïîäêëþ÷àåòñÿ îäèí õàðä â ëþáóþ äûðêó, è áóäü îí õîòü ïåðâûì õîòü âòîðûì âñå áóäåò ìîíòèðîâàòüñÿ, âçÿòî îòñþäà http://wl500g.info/showpost.php?p=20276&postcount=3
ïðîâåðåíî íåñêîëüêî ðàç äèñê âðó÷íóþ ìîíòèðóåòñÿ, âñå çàìå÷àòåëüíî, íî ïîñëå íåêñîëüêèõ ïîïûòîê çàïèñè íà íåãî ïîÿâëÿåòñÿ êó÷à îøèáîê, îí ïåðåìîíòèðóåòñÿ íà ÷òåíèå. íà áîëüøîì áðàòå èñïðàâëÿþòñÿ îøèáêè â ôàéëîâîé ñèñòåìå...
1)ïðîáëåìà þñá ðîóòåðà - ïîäêëþ÷èë äðóãîé õàðä ðàáîòàåò.
2) ïðîáëåìà êîðîáêè - íàäî èñêàòü äðóãóþ êîðîáêó sata->usb
ïðîâåðèë áëîê ïèòàíèÿ áåç íàãðóçêè 14 âîëüò, ïðè âêëþ÷åíèè ïðîñàäêà äî 11 ïîòîì 12.
3) èëè ãëþ÷èò õàðä - ïðîâåðèòü åãî SMART íå íà ÷åì
ïðè÷åì ïðè ïîäêëþ÷åíèè ê êîìïó ïðîáëåì, êàê áû, íåò - ôàéëîâàÿ ñèñòåìà ÷èòàåòñÿ è ïèøåòñÿ

**vectorm** · 25-05-2008, 20:25

Originally Posted by naves

ñìûñë ýòèõ äâóõ ñòðî÷åê ÷òî ïîäêëþ÷àåòñÿ îäèí õàðä â ëþáóþ äûðêó, è áóäü îí õîòü ïåðâûì õîòü âòîðûì âñå áóäåò ìîíòèðîâàòüñÿ, âçÿòî îòñþäà http://wl500g.info/showpost.php?p=20276&postcount=3
ïðîâåðåíî íåñêîëüêî ðàç äèñê âðó÷íóþ ìîíòèðóåòñÿ, âñå çàìå÷àòåëüíî, íî ïîñëå íåêñîëüêèõ ïîïûòîê çàïèñè íà íåãî ïîÿâëÿåòñÿ êó÷à îøèáîê, îí ïåðåìîíòèðóåòñÿ íà ÷òåíèå. íà áîëüøîì áðàòå èñïðàâëÿþòñÿ îøèáêè â ôàéëîâîé ñèñòåìå...
1)ïðîáëåìà þñá ðîóòåðà - ïîäêëþ÷èë äðóãîé õàðä ðàáîòàåò.
2) ïðîáëåìà êîðîáêè - íàäî èñêàòü äðóãóþ êîðîáêó sata->usb
ïðîâåðèë áëîê ïèòàíèÿ áåç íàãðóçêè 14 âîëüò, ïðè âêëþ÷åíèè ïðîñàäêà äî 11 ïîòîì 12.
3) èëè ãëþ÷èò õàðä - ïðîâåðèòü åãî SMART íå íà ÷åì
ïðè÷åì ïðè ïîäêëþ÷åíèè ê êîìïó ïðîáëåì, êàê áû, íåò - ôàéëîâàÿ ñèñòåìà ÷èòàåòñÿ è ïèøåòñÿ

Ñêîðåå âñåãî ïðîáëåìà êîðîáêè.

**uinoksk** · 22-06-2008, 18:00

Èìååòñÿ
Host scsi0: usb-storage
Vendor: Western Digital
Product: External HDD
Serial Number: 575845393037373937393339
Protocol: Transparent SCSI
Transport: Bulk
GUID: 105810103037373937393339
Attached: Yes
Port: 1
Bus: 01:03.2-1
À òàêæå wl500gp
Îòâàëèâàåòñÿ ãäå-òî ðàç â ñóòêè. Ïðè ðàáîòå âèíò êàê-òî èçäàåò ùåë÷êè. Ïðè ïîäñîåäèíåíèè è ðàáîòå ñ îñíîâíûì ñèñòåìíèêîì( äà è ñ íîóòîì) ðàáîòàåò íîðìàëüíî. Ïîäîçðåíèå íà ïðîáëåìû ñ ïèòàíèåì, òê âñå ÷òî ïîäñîåäèíÿåòñÿ ê þñá-ïîðòàì ñèëüíî íàãðåâàåòñÿ ÷åðåç íåêîòîðîå âðåìÿ.

**vectorm** · 22-06-2008, 18:25

Originally Posted by uinoksk

Îòâàëèâàåòñÿ ãäå-òî ðàç â ñóòêè. Ïðè ðàáîòå âèíò êàê-òî èçäàåò ùåë÷êè. Ïðè ïîäñîåäèíåíèè è ðàáîòå ñ îñíîâíûì ñèñòåìíèêîì( äà è ñ íîóòîì) ðàáîòàåò íîðìàëüíî. Ïîäîçðåíèå íà ïðîáëåìû ñ ïèòàíèåì, òê âñå ÷òî ïîäñîåäèíÿåòñÿ ê þñá-ïîðòàì ñèëüíî íàãðåâàåòñÿ ÷åðåç íåêîòîðîå âðåìÿ.

Ýòî íå ïîäîçðåíèå, à ñóðîâàÿ äåéñòâèòåëüíîñòü. Ëèáî ñîåäèíÿòü âèíò ÷åðåç õàá ñ âíåøíèì ïèòàíèåì, ëèáî, åñëè åñòü - ïèòàòü îò ñîáñòâåííîãî ÁÏ.

**serg28serg** · 22-06-2008, 20:17

Åñëè êëàöàåò ãîëîâàìè, òî
Íå õâàòàåò ìîùíîñòè ïèòàíèÿ.
Ïîñîâåòóéòå HDD-USB-êîðîáî÷êó

Thread: Ïîâðåæäåíèå ôàéëîâîé ñèñòåìû íà USB HDD

Thread Tools

Rate This Thread

Display

Help

Similar Threads

linuxrc bug? - WL-500g not booting from usb drive with hub

Usb Hdd nicht mehr erkannt in olegs FW

7.09 + USB + hotplug

Please help... USB HDD doesn't work

Tags for this Thread

Posting Permissions