I have a problem with this configuration:
http_server<----LAN---->WL500g_1<----WDS---->WL500g_2<----WLAN---->PC_with_WL138g
Firmware on both router: 1.9.2.7-7b
Encr.: WPA-PSK
When i try to download a big file (500MB) on PC_with_WL138g from http_server the speed is about 500kByte/s.
Thats not fast but enough for me. After ~50MB sometimes ~300MB the connection from WL500g_2 to PC_with_WL138g is dead.
In this Case only a reboot of WL500g_2 solve the problem.
On the WL500g_2 i can see that the client ist not AUTHORIZED
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[admin@WL500g_2 root]$ wl authe_sta_list
authe_sta_list 00:11:2F:E7:xx:xx # PC_with_WL138g
[admin@WL500g_2 root]$ wl autho_sta_list
autho_sta_list 00:13:E4:0F:xx:xx # WL500g_1
[admin@WL500g_2 root]$ wl sta_info 00:11:2F:E7:xx:xx
STA 00:11:2F:E7:xx:xx:
rateset [ 1 2 5.5 11 18 24 36 48 54 ]
idle 26 seconds
in network 153 seconds
state : AUTHENTICATED ASSOCIATED
flags 0x18
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Windows means that the connection is ok but no traffic is possible.
I have try:
1.Enable and disable the Network on PC_with_WL138g (Windows XP SP2)
2.Reboot the PC_with_WL138g
3.On the WL500g_2 wl down; wl restart; wl up
but nothing restore the connection.
I have the same problem with this configuration:
http_server<----LAN---->WL500g_1<----WDS---->WRT54GL<----WLAN---->Laptop_with_IPW2200BG
WL500g_1 Firmware: 1.9.2.7-7b
WRT54GL Firmware: DD-WRT V23 SP1
Encr.: WPA-PSK
Have somebody one of this configs without connection problems???
Last edited by tomekmik; 20-05-2006 at 09:21.