Over the last few days I created a new kamikaze 7.09 Image.
It is able to boot off the hdd and boot off usb
http://wl700g.homelinux.net/drupal/?q=node/146
Last edited by back2basic; 22-10-2007 at 16:54.
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
gonne test it tommorrow
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Last edited by back2basic; 25-10-2007 at 16:31.
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Try your new FW from http://wl700g.homelinux.net/drupal/?...es/kam7.09.trx
after flashing my router as usual(http://wl700g.homelinux.net/drupal/?q=node/146) on first booting the ready light just flashing and can't stop, i don't know why, i thing my HDD didn't spin down well and now i have that problem
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
During the firstboot the ready light does on during boot and goes off when its ready booting
When you're light stays on, I think the box try to boot from hdd ot usb
Please boot another working kamikaze image and then 'nvram unset boot_dev' and 'nvram commit' then flash my image again.
Everytime you install a new image you have to unset this value!!!!
after root is changed to usb or hdd the leds changed: ready goes on on power then blinks on boot en goes on when ready with boot
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
I installed the kam7.09 image. It seems to be running well enough and stable.
However, one thig I did notice: when I run top, it reports that over 90% CPU is occupied all of the time, oscillating between the following two tasks:
Code:9695 root R 516 9689 97.4 0.8 hotplug-callThis doesn't seem right to me. Any ideas?Code:9705 root R 528 622 97.8 0.8 default.script
When I run htop, it tells me that the default.script is related to udhcpc.
I suspect that someone might be trying to "appropriate" some of my wireless bandwidth.
Last edited by hal2k1; 29-10-2007 at 02:48.
Another thing I noticed:
The USB ports don't seem to be working, and the connected USB printer is not seen. This means that it does not work as a print server any more.Code:Oct 29 20:18:28 (none) lpr.notice p9100d[9365]: Connection from 192.168.1.36 port 4355 accepted Oct 29 20:18:28 (none) lpr.err p9100d[9365]: /dev/usb/lp0: No such file or directory Oct 29 20:18:30 (none) lpr.notice p9100d[9365]: Finished job: 379372 bytes received, 0 bytes sent
Having said that, Samba 3.0 is better than previous OpenWrt offerings for Samba.Code:root@OpenWrt:/# ls /dev/usb/ root@OpenWrt:/# ls /dev/ console full kmem mtd nvram ptmx random shm urandom cua gpio log mtdblock port pts root tts usb discs ide mem null ppp pty scsi tty zero
did you installed the ipkg for usb printer (kmod-usb-printer)
whem my box is idle the top looks like this
Code:Mem: 61644K used, 1284K free, 0K shrd, 25340K buff, 18396K cached Load average: 0.00 0.00 0.00 PID USER STATUS RSS PPID %CPU %MEM COMMAND 16205 root R 436 16202 1.1 0.6 top 16201 root S 564 562 0.1 0.8 dropbear 669 root S 5712 1 0.0 9.0 SABnzbd.py 738 root S 5712 670 0.0 9.0 SABnzbd.py 733 root S 5712 670 0.0 9.0 SABnzbd.py 737 root S 5712 670 0.0 9.0 SABnzbd.py 735 root S 5712 670 0.0 9.0 SABnzbd.py 734 root S 5712 670 0.0 9.0 SABnzbd.py 674 root S 5712 670 0.0 9.0 SABnzbd.py 684 root S 5712 670 0.0 9.0 SABnzbd.py 670 root S 5712 669 0.0 9.0 SABnzbd.py 671 root S 5712 670 0.0 9.0 SABnzbd.py 672 root S 5712 670 0.0 9.0 SABnzbd.py 673 root S 5712 670 0.0 9.0 SABnzbd.py 732 root S 5712 670 0.0 9.0 SABnzbd.py 742 root S 5712 670 0.0 9.0 SABnzbd.py 740 root S 5712 670 0.0 9.0 SABnzbd.py 675 root S 5712 670 0.0 9.0 SABnzbd.py 676 root S 5712 670 0.0 9.0 SABnzbd.py 743 root S 5712 670 0.0 9.0 SABnzbd.py 739 root S 5712 670 0.0 9.0 SABnzbd.pyCode:root@OpenWrt:~# uptime 12:52:24 up 20:38, load average: 0.00, 0.00, 0.00
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
Code:root@OpenWrt:~# logread -f Oct 29 12:56:34 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 2 Oct 29 12:56:34 (none) user.warn kernel: usb.c: USB device 2 (vend/prod 0x4b8/0x5) is not claimed by any active driver.Code:root@OpenWrt:~# ipkg install kmod-usb-printer Installing kmod-usb-printer (2.4.34-brcm-1) to root... Downloading http://downloads.openwrt.org/kamikaze/7.09/brcm-2.4/packages/./kmod-usb-printer_2.4.34-brcm-1_mipsel.ipk Configuring kmod-usb-printer Done.I think it should workCode:root@OpenWrt:~# logread -f Oct 29 12:57:47 (none) user.info kernel: hub.c: new USB device 01:03.1-1, assigned address 3 Oct 29 12:57:47 (none) user.info kernel: printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)
back2basic: Could you upload the image with the longer boottime, so we can get to mount our harddrives?
Thanks in advance
/regards
Henrik
the last one I tryed kept flashing so wasn't working at all. Gonne dig in that image tommorrow, for today I build ourself a nice little portal on
http://wl700g.homelinux.net/portal
its to display the tutorials in a more clear way for beginning linux guys
Openwrt or Custom Firmware on asus? - http://wl700ge.hezik.nl/ - Http://wl700g.homelinux.net
My ASUS collection: WL500gp(80GB usb-hdd - Running OpenWrt Kamikaze 7.09) | WL700gE(250GB - Running OpenWrt Kamikaze 8.09rc1)