Hello,


I'm trying to configure WLAN on the WL500 Premium with no success so far.

My web interface is no longer functional (I removed it right after the install trying to make better use of resources).

What I've done so far is:
I've established a SSID, configured dnsmasq/etc and was able to connect to the wireless LAN without any problems.

Shortly after I decided to go with WPA for security and I've done the following:
- started NAS with parameters:

nas -P /tmp/nas.lan.pid -l br0 -H 34954 -i eth1 -k "7QRtSUcdQ3ZEnk,cVQy7In11c8vNyx%%CLnepE85HhI\GGWmh Jsz&s!YzkwmXpg" -m 132 -s retea-acasa -w 6

The Windows client I'm testing with is now failing authentication (it gives no error but it no longer connects/associates with the AP after I click on the wireless network and give in my key for WPA+PSK or WPA2+PSK).

Can someone help me understand what step I might be missing or what error I might be doing in my setup ? (is any other command or nvram setting required? )