remove files on usb via smb - free space not updated

[0ggie]

I have stock firmware 1.9.7.5 and a usb drive attached. If I delete files via samba, they appear to be deleted but if I go to the USB status page, the free space never changes, even after I hit refresh.

If I try to move more files over via SMB, the router locks up and I have to reboot it.

Any ideas?

[0ggie]

no one has any suggestions?

[bigphantom]

if you go on web interface at System Command and there type
df and then enter

you should get something simmilar

Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 2880 2880 0 100% /
/dev/discs/disc0/part1 1005280 97008 908272 10% /tmp/harddisk


try it before deleting and after

I go to the USB status page

how do you do that?
i never did that !

[viktike]

It must be the original, offical firware, it has an USB Status page. And yes, it doesn't updates, till next reboot/remount. Asus'es sh*t stuff.

[0ggie]

Yes, it is the official asus firmware. Rebooting for it to update is pretty sad.

I guess I'll have to take the time and install oleg's firmware.