Bekomme vsftpd nicht zum laufen

[carterb]

Hallo zusammen,

ich habe vsftpd nach mascats tutorial installiert. Leider habe ich keinen Zugriff per FTP auf meinen Router. Weder von intern noch über dyndns-account von extern.

Vielleicht findet ja jemand den fehler.

Hier die laufenden Prozesse, denke vsftpd ist dabei ? oder?

[admin@Asus root]$ ps axf
  PID TTY      STAT   TIME COMMAND
    1 ?        S      0:01 /sbin/init
    2 ?        S      0:00 [keventd]
    3 ?        SN     0:00 [ksoftirqd_CPU0]
    4 ?        S      0:00 [kswapd]
    5 ?        S      0:00 [bdflush]
    6 ?        S      0:00 [kupdated]
    7 ?        S      0:00 [mtdblockd]
   59 ?        S      0:00 telnetd
   64 ?        S      0:00 httpd vlan1
   71 ?        S      0:00 klogd
   72 ?        S      0:00 dnsmasq
   74 ?        S      0:00 [khubd]
   83 ?        Ss     0:00 lpd
   85 ?        Ss     0:00 p9100d -f /dev/usb/lp0 0
   88 ?        Ss     0:00 waveservermain
   90 ?        Ss     0:00 rcamdmain
   96 ?        Ss     0:00 pppd file /tmp/ppp/options.wan0
   98 ?        Ss     0:00 infosvr br0
   99 ?        Ss     0:00 watchdog
  101 ?        Ss     0:00  \_ ntp
  115 ?        S      0:00 dropbear
  207 ?        Ss     0:01  \_ dropbear
  209 pts/0    Ss     0:00      \_ -sh
  234 pts/0    R+     0:00          \_ ps axf
  126 ?        S      0:00 [usb-storage-0]
  127 ?        S      0:00 [scsi_eh_0]
  132 ?        S      0:00 [kjournald]
  147 ?        S      0:00 /sbin/syslogd -m 0 -O /opt/var/log/messages -S -l 7
  152 ?        Ss     0:00 /opt/sbin/cron
  166 ?        S      0:01 /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1 -CX 1
  191 ?        S      0:00  \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1 -CX
  194 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  192 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  193 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  198 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  195 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  196 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  197 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  199 ?        S      0:00      \_ /opt/bin/XMail -SX 1 -Qn 1 -Yt 1 -Ln 1 -PX 1
  177 ?        S      0:00 /usr/sbin/busybox_httpd -c /opt/etc/httpd.conf -p 800
  186 ?        Ss     0:00 /opt/sbin/smbd -D
  188 ?        S      0:00 [kjournald]
  190 ?        Ss     0:00 /opt/sbin/nmbd -D
  205 ?        S      0:00 upnp -D -L br0 -W ppp0
  219 ?        Ss     0:00 /opt/sbin/xinetd 

Hier meine /opt/etc/vsftpd.conf

[admin@Asus etc]$ vi /opt/etc/vsftpd.conf
anonymous_enable=YES
ftp_username=oliver
# All Anonmyous Logins Are treated as Guests
guest_enable=NO
guest_username=guest
# User Control
#no_anon_password=NO
local_enable=NO
write_enable=NO
local_umask=022
#anon_upload_enable=YES
#anon_mkdir_write_enable=YES
dirmessage_enable=YES
# Activate logging of uploads/downloads.
xferlog_enable=YES
connect_from_port_20=YES
#chown_uploads=YES
#chown_username=wilco
vsftpd_log_file=/opt/var/log/vsftpd.log
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#idle_session_timeout=600
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#nopriv_user=ftpsecure
#async_abor_enable=YES
#ascii_upload_enable=YES
#ascii_download_enable=YES
ftpd_banner=Welcome to the NSLU2 vsftp daemon.
#deny_email_enable=YES
#banned_email_file=/opt/etc/vsftpd.banned_emails
#chroot_list_enable=NO
#chroot_list_file=/opt/etc/vsftpd.chroot_list
#ls_recurse_enable=YES
#chroot_local_user=YES
secure_chroot_dir=/opt/usr/share/empty/
local_root=/tmp/harddisk/ftp/
#listen=YES 

Hier meine /opt/etc/xinted.d/vsftpd

[admin@Asus etc]$ vi /opt/etc/xinetd.d/vsftp
cription: The vsftpd FTP server serves FTP connections.
# it uses normal, unencrypted usernames and passwords for auth
service ftp
{
disable = no
socket_type = stream
user = gast     gast
server = /opt/sbin/vsftpd
server_args = /opt/etc/vsftpd.conf
wait = no
nice = 10
only_from = 0.0.0.0/0
} 

Das logfile von vsftpd unter /opt/var/log/vsftpd.log ist leer.....

Habe ich was übersehen? Habe weder per anonymous noch mit "guest"-user Zugriff. Folgende Fehlermeldung vom FTP-Programm:

Serververbindung kann nicht hergestellt werden. 

Für alle die es versuchen wollen:

ftp://polch.homeftp.org 

Danke für jede Hilfe schon mal im Voraus.
Grüsse
Oliver

[Kunairu]

ich denke es liegt an der /opt/etc/xinted.d/vsftp das dort der user falsch angegeben ist sollte admin sein bzw es mit nobody versuchen. den user gast gibt es normal auf dem system nicht.
/opt/etc/xinted.d/vsftpd

service ftp
{
disable = no
socket_type = stream
user = admin
server = /opt/sbin/vsftpd
server_args = /opt/etc/vsftpd.conf
wait = no
nice = 10
only_from = 0.0.0.0/0
}

falls sonst noch was sein sollte probiers mal mit dieser conf und versuch dich mit dem admin einzuloggen.
sollte dies auch nicht gehen liegt es wohl an was anderem.
/opt/etc/vsftpd.conf

# Example config file /opt/etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
vsftpd_log_file=/opt/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that turning on ascii_download_enable enables malicious remote parties
# to consume your I/O resources, by issuing the command "SIZE /big/file" in
# ASCII mode.
# These ASCII options are split into upload and download because you may wish
# to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
# without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
# on the client anyway..
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to the NSLU2 vsftp daemon.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/opt/etc/vsftpd.banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/opt/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
ls_recurse_enable=YES

secure_chroot_dir=/opt/usr/share/empty

[carterb]

Danke für die Hilfe,

ich werde es gleich mal ausprobieren und melde mich wieder. Monentan ist die Zeit knapp und ich komme nicht dazu.

Bis die Tage
Oliver