Hi everyone,
i've recently bought an Asus WL500gP and use it
to download torrents onto a USB connected harddisc.
Since i'm a little paranoid i want to encrypt the downloaded files.
I've already searched the web and this forum and the only solution
i found was using losetup to set up an XOR encryption. Since XOR
isn't secure enough i'm wondering if anyone managed to get
loop-aes, truecrypt or something similar to work with the WL500gP.
up!
is there any cryptsetup luks modules availible?
no, you'd need to compile them yourself, which is probably a little difficult since your router uses a 2.4 kernel instead of a 2.6
Another thing you might take into consideration is that encrypting it via the router is a terribly slow process. I don't quite expect speeds above 1MB/s
some info on dm-crypt: http://www.saout.de/tikiwiki/tiki-index.php
Last edited by wpte; 27-11-2010 at 16:28.
thank you for your reply
i have netgear wnr3500l, it works under 2.6
I just did that on wl-500gP v1 with custom rtn firmware (2.6.22.19, you can grab it here - http://wl500g.googlecode.com) with additional modules + compiled cryptsetup (which was the difficult part for me actually) cryptsetup_1.4.3-1_mipsel.ipk
1) So you'd need to build custom firmware with altered src/gateway/Makefile (to install aes.ko, cryptoloop.ko, sha256.ko, dm-mod.ko & dm-crypt.ko) & modify kernel config as well to build them
2) Install cryptsetup package (from the link I gave - dependencies will be installed automagically from Oleg's optware repository)
Yes, it's terribly slow to copy something into the container, but you can use it as a secure storage for router configuration for example. But I'm not sure if speeds would be slow on Netgear. I reckon it's bit better than 500gP.
What would you expect from this hardware? Needs better CPU / more memoryCode:$ dd if=/dev/zero of=1 bs=1M count=20 20+0 records in 20+0 records out 20971520 bytes (20.0MB) copied, 45.423548 seconds, 450.9KB/s
Last edited by staticroute; 07-06-2012 at 01:22.