Firmware v1.8.1.7 CR2 [Oleg] - updated ( CR2a )

[xlephant]

my "must have" ip settings:

wan ip adress:
192.168.1.16 (because of DMZ IP from my SDSL /ROUTER)
wan subnet mask:
255.255.255.0
gateway:
192.168.1.1

local router ip:
192.168.1.3 (my.router)

DHCP Server:
starts at:
192.168.1.5
ends at:
192.168.1.10

thats all. i don't know why the router is searching for 192x ips in my local network, and i don't know if he is realy doing this. the fact is, that i can't connect to hp.com and adobe.com (other i didn't try) with the subnetmask 255.0.0.0. ideas?

[Oleg]

Well, guy. This is the reason, why it's going to 1.1.1.1 - you CAN'T specify the same net for LAN and WAN side. Switch your LAN to 192.168.0.0/255.255.255.0 and your problems will be solved.
This is not a bug, this is a MISCONFIGURATION.

[xlephant]

ohh its such a shame
i feel ashamed, you're totaly right. i knew that, but i didn't notice that by typing in the last post.

if you came to frankfurt (airport) next time you will get this beer crate in real

thx a lot, now everything is working fine.

[reddevil]

Hi,
I have problem with the transfer speed from my wireless network to my hdd. that is attach at the usb port.

When i install the firmware (1.8.1.7) than the ftp transfer speed is around 50 Kbyte. this is much lower than when i install the firmware (9.8.2.1) (ftp transfer speed : +/- 350 Kbyte).

is it normal that it's so huge difference? It take month's to fill my 160 gig hd with this speed
Thanks in advance.

[Oleg]

Hi,
I have problem with the transfer speed from my wireless network to my hdd. that is attach at the usb port.

Have you checked wired connection?

When i install the firmware (1.8.1.7) than the ftp transfer speed is around 50 Kbyte. this is much lower than when i install the firmware (9.8.2.1) (ftp transfer speed : +/- 350 Kbyte).

Is it read or write speed. Also, which firmware version you're using exactly? Is it 1.8.1.7 or 1.8.1.7-2a?

[Oleg]

if you came to frankfurt (airport) next time you will get this beer crate in real

Ok, will do.

[reddevil]

Have you checked wired connection?

Is it read or write speed. Also, which firmware version you're using exactly? Is it 1.8.1.7 or 1.8.1.7-2a?

If i use the wired connection i get the same result. I'm using firmware 1.8.1.7-2a. the speed make no difference,iIt's when i upload or download files.

[Oleg]

If i use the wired connection i get the same result. I'm using firmware 1.8.1.7-2a. the speed make no difference,iIt's when i upload or download files.

Please try using ASUS 1.8.1.7 firmware and let me know if it works better. The only reason for me is that your hdd case has broken chipset or whatever. With usb stick I''ve 600k transfer rate.

[reddevil]

Please try using ASUS 1.8.1.7 firmware and let me know if it works better. The only reason for me is that your hdd case has broken chipset or whatever. With usb stick I''ve 600k transfer rate.

Oleg i made a mistake. here are my new results: (all in wired state, ftp, same file 12MB)

firmware :
- 9.8.2.1 : upload : 250 K/s Download : 400 K/s
- 1.8.1.7 : upload : 250 K/s Downlaod : 470 K/s
- 1.8.1.7-2a : upload : 50 K/s Download : 600 K/s

So the slow speed was only at upload. sorry about that. But it's not much if you compare it with the other firmwares. And why is the upload slower than download?

[Oleg]

Probably your case are built using the Genesys Logic chips... 1.8.1.7-2a has workarounds for it.
Take a look at this thread and
try launching and post results for this command

cat /proc/scsi/usb-storage-0/0

[reddevil]

Probably your case are built using the Genesys Logic chips... 1.8.1.7-2a has workarounds for it.
Take a look at this thread and
try launching and post results for this command

cat /proc/scsi/usb-storage-0/0

   
cat /proc/scsi/usb-storage-0/0

Host scsi0: usb-storage
Vendor: Myson Century, Inc.
Product: USB Mass Storage Device
Serial Number: 100
Protocol: 8070i
Transport: Bulk
GUID: 04cf88180000000000000100
Attached: Yes

[naruto]

Hello

i have 2 problems with this FW

1 the bigest i canot conect o my ISP (ARCOR) with PPOE.

2 the DHCP gives my no fix IP assign to MAC

with 1.7 FW from OLeg works all fine

THX

Maik

[daffy]

If Arcor = "Arcor of Germany", well, no problems whatsoever here, from the very beginning (1.6.3) until now (1.8.1.7-2a).

Since the last reset to defaults (my upgrade to 1.8.1.7-1), I haven't bothered assigning a static IP address to one specific MAC; this at least used to work in the 1.7 series (of Oleg's firmware).

[Oleg]

   
cat /proc/scsi/usb-storage-0/0

Host scsi0: usb-storage
Vendor: Myson Century, Inc.
Product: USB Mass Storage Device
Serial Number: 100
Protocol: 8070i
Transport: Bulk
GUID: 04cf88180000000000000100
Attached: Yes

Ok, I will check on this.

[Oleg]

Hello

i have 2 problems with this FW

1 the bigest i canot conect o my ISP (ARCOR) with PPOE.

2 the DHCP gives my no fix IP assign to MAC

with 1.7 FW from OLeg works all fine

THX

Maik

PPPoE works fine for me. Do you've anything in the logs?

Have you reseted unit to defaults after upgrade?

As for DHCP - manual assignment also work, be sure to clear caches on the clients.