Page 43 of 64 FirstFirst ... 33414243444553 ... LastLast
Results 631 to 645 of 958

Thread: [HowTo] Install and configure Oleg's firmware

  1. #631
    Join Date
    Feb 2005
    Location
    Germany - Frankfurt
    Posts
    1,548
    you could give openvpn a try.
    Search the forum for openvpn.

    wengi
    Übersicht aller HowTos --- HowTo Overview (mostly german)
    WL-HDD mit diesem Setup. --- WL-HDD with this setup.
    Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
    Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)

  2. #632

    OVPN

    OVPN has been seted up and it's working ( from local laptop). Later will try from WAN.

  3. #633

    OVPN

    Yes. It's working great

  4. #634
    I want to post a custom message when logging in with putty, how do i do that?

    Please excuse me if this was discussed before and please link me to the topic or posts, but my internet connection is working painfully slow today and when i try to search for this i did not receive results.

    Thank you.

  5. #635
    Join Date
    Feb 2007
    Location
    Moscow, Russia
    Posts
    3,805

  6. #636
    Join Date
    Feb 2005
    Location
    Germany - Frankfurt
    Posts
    1,548
    Hello,

    this is a general linux question.
    Have alook at:

    http://linux.about.com/library/cmd/blcmdl5_issue.htm
    http://linux.about.com/library/cmd/blcmdl5_motd.htm

    issue is pre-login, motd is post-login.

    wengi
    Übersicht aller HowTos --- HowTo Overview (mostly german)
    WL-HDD mit diesem Setup. --- WL-HDD with this setup.
    Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
    Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)

  7. #637

    FTP login

    wtf is this
    Apr 20 14:00:49 vsftpd[1562]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    Apr 20 14:00:51 vsftpd[1562]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    Apr 20 14:00:53 vsftpd[1562]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    Apr 20 14:00:55 vsftpd[1565]: CONNECT: Client "210.82.111.91"
    Apr 20 14:00:56 vsftpd[1564]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    Apr 20 14:00:58 vsftpd[1564]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    Apr 20 14:01:00 vsftpd[1564]: [Administrator] FAIL LOGIN: Client "210.82.111.91"
    in web syslog I see, that someone has trayed to connect to my ftp from Apr 20 14:00:20 till Apr 20 14:24:28

    how I can block that f*** IP address?
    P.S. I don't have username "Administrator" for my ftp.
    It would be silly
    P.S.S. this isn't first time, when someone is traying to connect.

  8. #638
    Join Date
    Feb 2005
    Location
    Germany - Frankfurt
    Posts
    1,548
    Hi all,

    i added a step to correct the time zone settings for middle europe.
    search the howto for "pre-boot" and you will find the additions.

    wengi
    Übersicht aller HowTos --- HowTo Overview (mostly german)
    WL-HDD mit diesem Setup. --- WL-HDD with this setup.
    Kein Support per PM - Frage im jeweiligen Thread! --- No support via pm - ask in the according thread!
    Eine wirklich gute Idee erkennt man daran, dass ihre Verwirklichung von vorne herein ausgeschlossen erscheint. (Albert Einstein)

  9. #639

    Permission denied when i try to install new package

    Hi all,
    pls I have still problem with permission denied when i try:

    [admin@ASUS_160GB ipkg]$ ipkg update
    Downloading http://ipkg.nslu2-linux.org/feeds/op...le/Packages.gz
    sh: wget: Permission denied
    An error ocurred, return value: 1.
    Collected errors:
    ipkg_download: ERROR: Command failed with return value 127: `wget -q -P /opt/ipkg-4TwonM http://ipkg.nslu2-linux.org/feeds/op...le/Packages.gz'

    [admin@ASUS_160GB ipkg]$ ipkg upgrade
    sh: rm: Permission denied
    Nothing to be done
    Successfully terminated.

    I posted here at this thread before (read page 38, posts 559-569) but still have this problem.
    I am really newbie with linux so Wengi pls can you write me how to use e2fsck on /dev/discs/disc0/part2??? Dont know how to operate with superblocks etc.
    Second dont know if check is necessary because i can create dir on /opt and can copy files in it. So I can write to /opt.

    Any idea how to fix this permission denied problem? After finished this tutorial it forks for half year without problems.

  10. #640
    Neither I cannot do this if I want any change:
    Code:
    flashfs save && flashfs commit && flashfs enable && reboot
    here is post:

    Code:
    [admin@ASUS_160GB tmp]$ flashfs save && flashfs commit && flashfs enable && reboot
    /sbin/flashfs: /sbin/flashfs: 20: cat: Permission denied
    /sbin/flashfs: /sbin/flashfs: 73: [: Permission denied
    tar: Removing leading '/' from member names
    tar: /tmp/local: Unknown file type
    tar: Error exit delayed from previous errors
    /sbin/flashfs: /sbin/flashfs: 73: ls: Permission denied

  11. #641
    Join Date
    Feb 2007
    Location
    Moscow, Russia
    Posts
    3,805
    Something is wrong in your flashfs.
    Disable it:
    PHP Code:
    nvram set boot_local=""
    nvram commit
    reboot 
    Then check again, e.g. with
    PHP Code:
    flashfs status 
    If it responds, load it without execution:
    PHP Code:
    flashfs load 
    and search for the error in flashfs

    Related Russian thread: http://wl500g.info/showthread.php?t=18949

    P.S. one of the guesses: return LD_LIBRARY_PATH to the default value if it was updated in flashfs
    Last edited by al37919; 22-04-2009 at 17:16.

  12. #642
    Related Russian thread: http://wl500g.info/showthread.php?t=18949

    Ehm but I cant read Russian

    flashfs status gives me all Permission denied

    How can I search for errors in flashfs?
    Last edited by Etor; 23-04-2009 at 17:39.

  13. #643
    Join Date
    Feb 2007
    Location
    Moscow, Russia
    Posts
    3,805
    Quote Originally Posted by Etor View Post
    flashfs status gives me all Permission denied
    even after disbling it?
    Quote Originally Posted by Etor View Post
    How can I search for errors in flashfs?
    using common sense --- e.g. comment [or remove] everything and then uncomment file-by-file, line-by-line

  14. #644
    Join Date
    Feb 2008
    Location
    Norway
    Posts
    19
    What if...I use a usb flash drive for the swap area, and the HDD only for share files, and attach them both to the router via a usb hub? I guess the HDD would not spin up by transmission then, since the activity caused by daemon (and transmission) goes to the usb flash drive?

    Quote Originally Posted by wengi View Post
    Start and stop it manually.
    No other way because the daemon hosts the webinterface.

    wengi

  15. #645
    Quote Originally Posted by Etor View Post
    Hi all,
    pls I have still problem with permission denied when i try:

    [admin@ASUS_160GB ipkg]$ ipkg update
    Downloading http://ipkg.nslu2-linux.org/feeds/op...le/Packages.gz
    sh: wget: Permission denied
    An error ocurred, return value: 1.
    Collected errors:
    ipkg_download: ERROR: Command failed with return value 127: `wget -q -P /opt/ipkg-4TwonM http://ipkg.nslu2-linux.org/feeds/op...le/Packages.gz'

    [admin@ASUS_160GB ipkg]$ ipkg upgrade
    sh: rm: Permission denied
    Nothing to be done
    Successfully terminated.

    I posted here at this thread before (read page 38, posts 559-569) but still have this problem.
    I am really newbie with linux so Wengi pls can you write me how to use e2fsck on /dev/discs/disc0/part2??? Dont know how to operate with superblocks etc.
    Second dont know if check is necessary because i can create dir on /opt and can copy files in it. So I can write to /opt.

    Any idea how to fix this permission denied problem? After finished this tutorial it forks for half year without problems.
    I have the same problem with e2fsck:
    my ASUs says:
    kernel: EXT3-fs warning: mounting fs with errors, running e2fsck is recommended.
    so how to use e2fsck?

    Thank You

Page 43 of 64 FirstFirst ... 33414243444553 ... LastLast

Similar Threads

  1. [Howto] Install DLNA media servers for Oleg firmware
    By ecaddict in forum WL-500gP Tutorials
    Replies: 18
    Last Post: 06-06-2017, 08:40
  2. Replies: 24
    Last Post: 05-05-2015, 08:42
  3. Replies: 28
    Last Post: 02-06-2013, 21:58
  4. Replies: 6
    Last Post: 21-09-2012, 18:06
  5. [Howto] Install kernel modules for Oleg firmware
    By ecaddict in forum WL-500gP Tutorials
    Replies: 0
    Last Post: 05-12-2011, 17:18

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •