[HowTo] Install and configure Oleg's firmware

[wengi]

@Kubicz

check your rc.unslung and corresponding xinetd rc file.
Can you start xinetd manually? (with start/stop option?)

wengi

[mataanjin]

Hi,

which service?
Generally have a look at the conf files in /opt/etc

wengi

web service( to acsses my router )
shh(dropbear?)

[Kubicz]

@Kubicz

check your rc.unslung and corresponding xinetd rc file.
Can you start xinetd manually? (with start/stop option?)

wengi

Hi wengi,

Thanks a lot, problem solved - it was in a user settings, because I changed my root user, but not changed settings of corresponding files.

Now have another problem, I feel like noob, because I had to deal this situation year ago and now cannot remember, how have a solved it.

Samba is set, but I cannot access even a folders, because have security set to USER. When typing address of the router than bumps a window, where I can put a user name and password, but cannot access it.

Tried several things, have setted /opt/etc/samba/smbpasswd, where I have a password, but not working. When having security in smb.conf set to SHARE, it works, but I need to have it secured -> USER.

Thanks for help!

[velcrow]

@ the forum Master -

Can this be stickyed - I am frightened it will depart from the landing page!!

Thanks Velcrow

(I keep referencing this post so it would be great to see it near the top)

[wengi]

Hi there,

been away some time.
Problems still current or solved in the meantime?

wengi

[killerage]

Hy wengie can you help me i have a problem with the listening port of transmission.I have to open the port from the asus or the asus automaticly opens the ports.Many thanks

[koper89]

"
[koper89@ROUTER root]$ free
total used free shared buffers cached
Mem: 30164 29284 880 0 596 21292
-/+ buffers/cache: 7396 22768
Swap: 524276 6740 517536
"
is this okay?? I must reboot my router often, when i use rtoorent.. is this usage of memory ok? or something is wrong?? How can i fix this??

[wengi]

Hy wengie can you help me i have a problem with the listening port of transmission.I have to open the port from the asus or the asus automaticly opens the ports.Many thanks

Depends on the network config.
- If your asus is directly connected to the inet you will have to open the port within iptables. (see Howto 14b, change port 22 to your transmission port)
- If another router is connecting to the internet you will have to open the port on this router.

@koper89
Looking good. Swap is used. I do not use rtorrent, so i can not help you that much...

wengi

[koper89]

is there web gui for transmission??

[wengi]

Yes. See bottom of chapter 9b.

wengi

[killerage]

I have a modem what is a router before the asus both all the ports are opened because the ip of the asus is in dmz zone....i want to disable completly the firewall , and learn hoe to open the ports if not.... pls help me

[mataanjin]

i want to access my box using ssh, but my isp block port 22.
how to redirect/forward incoming connection from 12222 to port 22?

is there possible in transmission, when i press log it's only
generate the graph(not showing the log file)?

if i turn off my firewall setting, post-firewall isn't executed?

in my transmission log i have this

Couldn't bind port 65534: Address already in use
Oct 22 13:47:46 transmissiond[1600]: Couldn't open port 65534 to listen for incoming peer connections (errno 125 - Address already in use)
Oct 22 13:47:46 transmissiond[1600]: Couldn't bind port 65534: Address already in use
Oct 22 13:47:46 transmissiond[1600]: Couldn't open port 65534 to listen for incoming peer connections (errno 125 - Address already in use)
Oct 22 13:47:46 transmissiond[1600]: Couldn't bind port 65534: Address already in use
Oct 22 13:47:46 transmissiond[1600]: Couldn't open port 65534 to listen for incoming peer connections (errno 125 - Address already in use)

what's the error, and how to correct it? i have open port 65534.
tq

[wengi]

I have a modem what is a router before the asus both all the ports are opened because the ip of the asus is in dmz zone....i want to disable completly the firewall , and learn hoe to open the ports if not.... pls help me

If you do not use your asus as router: Do NOT use "home gateway" mode.
This can be changed in the asus webinterface.
This will disable firewall, NAT and others...

wengi

[wengi]

@mataanjin

1. Do a forum search on how to redirect a port. this has been discussed several times.

2. "Address already in use" means Address already in use
You should have a look at ps if transmission is running several times (not the children!) or if another process is using thi port. try 'netstat' to list active ports.

wengi

[wengi]

Hi,

You con only eport rw if you have write rights!
/mnt is read-only:

[admin@blechbuechse /tmp]$ touch /mnt/temp
cannot touch `/mnt/temp': Read-only file system

Try to use /tmp/mnt.

wengi