[HowTo] Install and configure Oleg's firmware

[!gm]

run

mke2fs -n /dev/discs/disca/part3

and use one of the superblocks in

e2fsck -b [superblock-here] /dev/discs/disca/part3

The e2fsck will run a long time on the router. I suggest you repair the filesystem on an other machine, by attaching the pen-drive there. The procedure is the same, but the device number may differ as you may have connected several pen-drives.

good luck
gm

[gagauta]

hi,

i have installed the latest firmware for wl500gp

i know about changes with disca

but i have a issue with opening a port

with vi I edit /usr/local/sbin/post-firewall and insert

iptables -I INPUT -m tcp -p tcp --dport 9091 -j ACCEPT

save in vi

flashfs save && flashfs commit && flashfs enable && reboot

after reboot I check open port with canyouseeme.org and receive error

what I do wrong?
please advise

10x