Results 1 to 13 of 13

Thread: USB HDD connects as Webcam

  1. #1

    USB HDD connects as Webcam

    Hello,

    I am having troubles connecting a Ice Link Mobile HDD USB2.0 with a Maxtor 160 GB HD inside. I have created a 160 GB primary fat32 partition on the drive and have attached the drive to the router.
    In the system log I can read the following:

    Oct 15 21:59:23 USB webcam: attached

    But I don't have a webcam attached!

    How can I attach the HDD in a proper way??? Do I need another firmware, I tried to upgrade from 1.6.5.3 to 1.8.1.9 and I think I succeeded but somehow I still see 1.6.5.3 as firmware version in the firmware upgrade window.

    Who can help?

  2. #2
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206
    Try Web Camera Mode = Disabled in your router settings
    Brubber

    WL-500g, WL-138g, WL-160g

  3. #3
    Quote Originally Posted by brubber
    Try Web Camera Mode = Disabled in your router settings
    It is disabled!

    The message is HDD related, I tried it by disconnecting the HDD.

  4. #4
    Update:

    I rebooted my pc and now my firmware version is ok.

    I also tried a memory stick and that worked also.

    Is there a way to mount the hdd in a proper way?

  5. #5
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206
    Enabled the ftp server on your router?
    Brubber

    WL-500g, WL-138g, WL-160g

  6. #6
    Quote Originally Posted by brubber
    Enabled the ftp server on your router?
    Yes, memory stick gives no problems. I can reach it through ftp!

  7. #7
    Join Date
    Sep 2004
    Location
    NL
    Posts
    206
    Quote Originally Posted by Oldchatterman
    Yes, memory stick gives no problems. I can reach it through ftp!
    Yes ofcourse, stupid question
    Brubber

    WL-500g, WL-138g, WL-160g

  8. #8
    I updated the firmware to 9.8.2.1 and tried again. I saw more lines in the logging (maybe related to beta version of firmware).

    The following showed up in the logging:

    Oct 17 16:45:19 klogd: hub.c: new USB device 00:04.0-1, assigned address 2
    Oct 17 16:45:19 klogd: usb-storage: act_altsettting is 0
    Oct 17 16:45:19 klogd: usb-storage: id_index calculated to be: 108
    Oct 17 16:45:19 klogd: usb-storage: Array length appears to be: 111
    Oct 17 16:45:19 klogd: usb-storage: USB Mass Storage device detected
    Oct 17 16:45:19 klogd: usb-storage: Endpoints: In: 0x80d74df4 Out: 0x80d74de0 Int: 0x00000000 (Period 0)
    Oct 17 16:45:19 klogd: usb-storage: New GUID 04cf88130000000000000100
    Oct 17 16:45:19 klogd: usb-storage: GetMaxLUN command result is 1, data is 0
    Oct 17 16:45:19 klogd: usb-storage: Transport: Bulk
    Oct 17 16:45:19 klogd: usb-storage: Protocol: 8070i
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: scsi0 : SCSI emulation for USB Mass Storage devices
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Command INQUIRY (6 bytes)
    Oct 17 16:45:19 klogd: usb-storage: 12 00 00 00 ff 00 00 00 a0 b9 0a 80
    Oct 17 16:45:19 klogd: usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 12
    Oct 17 16:45:19 klogd: usb-storage: Bulk command transfer result=0
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/255
    Oct 17 16:45:19 klogd: usb-storage: Bulk data transfer result 0x1
    Oct 17 16:45:19 klogd: usb-storage: Attempting to get CSW...
    Oct 17 16:45:19 klogd: usb-storage: clearing endpoint halt for pipe 0xc0020280
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_clear_halt: result=0
    Oct 17 16:45:19 klogd: usb-storage: Attempting to get CSW (2nd try)...
    Oct 17 16:45:19 klogd: usb-storage: Bulk status result = 0
    Oct 17 16:45:19 klogd: usb-storage: Bulk status Sig 0x53425355 T 0x1 R 219 Stat 0x0
    Oct 17 16:45:19 klogd: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
    Oct 17 16:45:19 klogd: usb-storage: scsi cmd done, result=0x0
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: Vendor: Maxtor 6 Model: Y160P0 Rev: YAR4
    Oct 17 16:45:19 klogd: Type: Direct-Access ANSI SCSI revision: 02
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad LUN (0/1)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (1/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (2/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (3/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (4/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (5/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (6/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Bad target number (7/0)
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Command TEST_UNIT_READY (6 bytes)
    Oct 17 16:45:19 klogd: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
    Oct 17 16:45:19 klogd: usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN 0 L 0 F 0 CL 12
    Oct 17 16:45:19 klogd: usb-storage: Bulk command transfer result=0
    Oct 17 16:45:19 USB webcam: attached
    Oct 17 16:45:19 klogd: usb-storage: Attempting to get CSW...
    Oct 17 16:45:19 klogd: usb-storage: Bulk status result = 0
    Oct 17 16:45:19 klogd: usb-storage: Bulk status Sig 0x53425355 T 0x2 R 0 Stat 0x0
    Oct 17 16:45:19 klogd: usb-storage: scsi cmd done, result=0x0
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Command READ_CAPACITY (10 bytes)
    Oct 17 16:45:19 klogd: usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
    Oct 17 16:45:19 klogd: usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN 0 L 8 F 128 CL 12
    Oct 17 16:45:19 klogd: usb-storage: Bulk command transfer result=0
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_transfer_partial(): transfer complete
    Oct 17 16:45:19 klogd: usb-storage: Bulk data transfer result 0x0
    Oct 17 16:45:19 klogd: usb-storage: Attempting to get CSW...
    Oct 17 16:45:19 klogd: usb-storage: Bulk status result = 0
    Oct 17 16:45:19 klogd: usb-storage: Bulk status Sig 0x53425355 T 0x3 R 0 Stat 0x0
    Oct 17 16:45:19 klogd: usb-storage: scsi cmd done, result=0x0
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: SCSI device sda: 320173056 512-byte hdwr sectors (163929 MB)
    Oct 17 16:45:19 klogd: Partition check:
    Oct 17 16:45:19 klogd: /dev/scsi/host0/bus0/target0/lun0:usb-storage: queuecommand() called
    Oct 17 16:45:19 klogd: usb-storage: *** thread awakened.
    Oct 17 16:45:19 klogd: usb-storage: Command READ_10 (10 bytes)
    Oct 17 16:45:19 klogd: usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
    Oct 17 16:45:19 klogd: usb-storage: Bulk command S 0x43425355 T 0x4 Trg 0 LUN 0 L 4096 F 128 CL 12
    Oct 17 16:45:19 klogd: usb-storage: Bulk command transfer result=0
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
    Oct 17 16:45:19 klogd: usb-storage: usb_stor_transfer_partial(): transfer complete
    Oct 17 16:45:19 klogd: usb-storage: Bulk data transfer result 0x0
    Oct 17 16:45:19 klogd: usb-storage: Attempting to get CSW...
    Oct 17 16:45:19 klogd: usb-storage: Bulk status result = 0
    Oct 17 16:45:19 klogd: usb-storage: Bulk status Sig 0x53425355 T 0x4 R 0 Stat 0x0
    Oct 17 16:45:19 klogd: usb-storage: scsi cmd done, result=0x0
    Oct 17 16:45:19 klogd: usb-storage: *** thread sleeping.
    Oct 17 16:45:19 klogd: p1
    Oct 17 16:45:19 klogd: WARNING: USB Mass Storage data integrity not assured
    Oct 17 16:45:19 klogd: USB Mass Storage device found at 2


    Can someone see something strange in the loggings?

  9. #9
    I want to downgrade to a firmware version of Oleg, can somebody recommend me a version and could it make a difference?

  10. #10
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Seems ASUS decided, that you've attached a webcam based on vendor id. You need to flash custom firmware to get vendor id and device id from your case. I need this information to try fixing this.

  11. #11
    I upgraded to Oleg's firmware 1.7.5.9-5 and that did the trick for me, no problems anymore.
    Thanks for the work Oleg!

  12. #12
    Join Date
    Dec 2003
    Location
    Russian Federation
    Posts
    8,353
    Quote Originally Posted by Oldchatterman
    I upgraded to Oleg's firmware 1.7.5.9-5 and that did the trick for me, no problems anymore.
    Thanks for the work Oleg!
    Please send me an output for the
    Code:
    cat /proc/bus/usb/devices
    1.7.5.9-5 is bit outdated at the moment. Latest is 1.8.1.7-2.

  13. #13
    Quote Originally Posted by Oleg
    Please send me an output for the
    Code:
    cat /proc/bus/usb/devices
    1.7.5.9-5 is bit outdated at the moment. Latest is 1.8.1.7-2.
    The output:

    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
    P: Vendor=0000 ProdID=0000 Rev= 0.00
    S: Product=USB OHCI Root Hub
    S: SerialNumber=b8004000
    C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
    I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=04cf ProdID=8813 Rev=a0.01
    S: Manufacturer=Myson Century, Inc.
    S: Product=USB Mass Storage Device
    S: SerialNumber=100
    C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
    I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
    E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
    E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •