The original values on WL-500gP with Asus firmware 1.9.7.5 are:
nvram set sdram_init=0x000b
nvram set sdram_ncdl=0x207
In Marcnesium's tutorial there's a note about nvram setting to apply after oleg firmware installation, to increase nvram to 32Mb.
Now I have to replace Oleg's firmware with the original Asus fw, cause I'm reselling this router (I have another one running with Oleg's fw !!!).Code:nvram set sdram_init=0x0009 nvram set sdram_ncdl=0 nvram commit reboot
Should I go back with other nvram settings or reinstalling Asus's original fw will do all job for me ?
Thanks, Max
The original values on WL-500gP with Asus firmware 1.9.7.5 are:
nvram set sdram_init=0x000b
nvram set sdram_ncdl=0x207