Results 1 to 4 of 4

Thread: 30m LAN cable betw. 2 wl-500gP not working

  1. #1

    30m LAN cable betw. 2 wl-500gP not working

    I have connected 2 Asus via 30m LAN cable and as a result I can not ping one or the other. I have tried all ports available. the LAN LED is always up sometimes flashing on different ports sometimes not.
    The 30m LAN cable is working properly if I only connect 1 Asus and ping it from the Laptop -that is surely working in both directions.
    Also the 2 Asus do communicate properly if I hook up just a 1m LAN cable between them.

    What is the problem? Is it the Asus 10/100 switch? Thanks for any advice!
    Last edited by dyonisos; 18-07-2007 at 22:14. Reason: Korrektur

  2. #2
    Is the cable a direct or a crossover cable?

  3. #3

    1:1 cable used, auto MDI-X

    Quote Originally Posted by jrosado View Post
    Is the cable a direct or a crossover cable?
    I am using a 1:1 cable. Anywhy that should not matter as the Asus does auto MDI-X. Also the LAN Link LED is up.

  4. #4

    issue was sheild

    the problem was not with cross-over or 1.1. I suspect one of the Asus spread the 50Hz all over the shielded cable. I simply isolated the cable shield on the end of one of the Asus (the suspected culprit) and now I see only 1% packet-loss.

Similar Threads

  1. 500GP и LAN HDD
    By freewind in forum Russian Discussion - РУССКИЙ (RU)
    Replies: 8
    Last Post: 18-07-2008, 08:09
  2. 500gP behind router (lifebox from Orange)
    By Driek in forum WL-500gP Firmware Discussion
    Replies: 0
    Last Post: 15-03-2007, 21:59
  3. wl500gd: no response after cable modem connect
    By luka74 in forum WL-500g Q&A
    Replies: 1
    Last Post: 20-01-2006, 21:07
  4. Replies: 1
    Last Post: 09-12-2005, 22:29

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •