From a bunch of articles I read online, since I use PPPoE, The correct value for PPPoE should be 1454 (HEX=5ae).
Type: Posts; User: twoblink
From a bunch of articles I read online, since I use PPPoE, The correct value for PPPoE should be 1454 (HEX=5ae).
Well, I found out that it was a nvram problem.
Had to flash it first clearing the nvram, then the recovery, then the new firmware.
That allowed me to use admin/admin to log in.
I just installed WL500gx-1.9.2.7-10.trx of olegs. It is up and running, but I don't know what the default login and password is!
I tried admin/admin and every combo therein.. but no go..
Any...
I posted this question before but I don't see the post, so I guess I'll repost again..
Can I do a complete pass-through from the inside to outside for one box only?
Diagram below:
Internet...
Oleg's firmware topped out at a whopping 98Mbits for box to box transfer:
(Server Side, Gentoo 2.6.x kernel + vsftpd)
(Client Side, XP box running LE_FTP passive)
dd-wrt topped out around...
I get 90~99mbits wired, and 21mbits for wifi.
I use the latest Oleg version.
I mucked with my MTU; make sure the two computers have the same MTU.
I was mucking with the firmware, installed dd-wrt, which ran well, but I couldn't get my printer to work under it, and so I switched to the latest Oleg firmware.
Question, has anybody benchmarked...
well, it ended up that I read somewhere (after like 4 hours worth of searches) that you might have to press the reset button after you've flashed the router if the previous flashed firmware was...
I tried all that was listed, still couldn't get it to print, so I went back to the old firmware.
I did notice that downloads from the internet were better with dd-wrt, but transfers between two...
I installed Oleg's WL500gx-1.9.2.7-7g ...
What's the login and password???
I tried "admin" "admin" but doesn't work..
??
I changed my firmware to dd-wrt.. it seems faster, but I was wondering if anybody has gotten USB printing to work on it.. if not, I might have to go back to the old firmware because I need printing....
It worked! Thanks!
:D
I started being unable to connect to my Router (WL-500g Deluxe) about 2 weeks ago. I now can't connect whatsoever, and it doesn't show up.
The "Air" light in the front isn't on.
Anything I...
Well..
I was going to post the famous "my wan port dies".
I was then going to follow it up with the "my wan->lan port forward times out".
Then I used the search button... and I think I've...