Stupid me I forgot #!/bin/sh :o
Now it works great!
When I disconnect or power off/on the firmware is loaded in the printer right away!
Great work!
Type: Posts; User: GJAman
Stupid me I forgot #!/bin/sh :o
Now it works great!
When I disconnect or power off/on the firmware is loaded in the printer right away!
Great work!
I now have the firmware on the usb stick (after connecting a usb hub to my router). And added the line "tmp/harddisk/etc/hp1020/start_hp1020" (wich contains the line...
That works great over here :)
I will add the following it to my boot-script later on. :)
Hope it works!
That works great over here :)
I will add the following it to my boot-script later on. :)
That is not nice :mad:
I also bought a HP LaserJet 1020 some time ago. And now that we have moved to a new address, so I wanted to connect the HP LaserJet 1020 to the Asus WL-500g.
And now see...
attached image to this post [antiloop]
Woon je ook in Apeldoorn dat is toevallig :)
Ah, leuk waar zullen we het eens over hebben :)
http://oleg.wl500g.info/1.8.1.7-3/
When the distance is the same and I use the OLD firmware (1.8.1.7 CR3) the connection is good
When I use the NEW firmware (1.9.2.7 CRx) with the same distance the connection is bad! (even when the...
The range has decreased sinths firmware 1.9.2.7
Because I use the follow setup http://wl500g.info/showpost.php?p=3516&postcount=2
I have to use the full range. I Changed the output power but this...
"Changelog" Version 1.9.2.7
WL-500g English Firmware Version, version 1.9.2.7 Note: The zip file contains the firmware,Asus Speaker Express quick guide(English), Bandwidth Management quick...
Must that not be? ;)
3. Generate the DSS key by typing
dropbearkey -t dss -f /usr/local/etc/dropbear/dropbear_dss_host_key
4. Generate the RSA key by typing
dropbearkey -t rsa -f...
I just put firmware WL300g_1.8.1.7-1.trx on my Asus WL-300g and as you can see I have still a internet connection, so it is working :)
I will test some more functions (for example WPA-PSK and...
Here are the results from tests I preformed about two and a half months ago:
After I entered in telnet “et -i eth1 speed ....” (where the dots have to be replaced with auto or full10 or half10 or...
I just converted all domain name's in the gwebcaches file (from http://cvs.sourceforge.net/viewcvs.py/gift/Gnutella/data/) to ip adress's, see attachment.
1. Download "gwebcaches.txt"
2. Rename...
So I have swaped the 128MB MemoryStick with a IBM 40GB 7200RPM HDD :)
Isn't there anyone else who want to post there network setup? See Topicstart
- Time of Day to Enable Radio: Wireless > Advanced
- Time of Day to Enable LAN to WAN Filter: Internet Firewall > WAN & LAN Filter
- Time of Day to Enable URL Filter: Internet Firewall > URL Filter
I'am interested!
Here my network configuration:
Auto, half10 and full10 are working without any problems even if I don't unplug and plug back the cable. But half100 and full100 aren't working even if I unplug and plug the cable back.
BTW: my...
Here are the results from the tests I preformed today:
After I entered in telnet “et -i eth1 speed ....” (where the dots have to be replaced with auto or full10 or half10 or full100 or half100. I...
Have you also tried 10Fullduplex?
What kind of internet connection do you have (up/down speed)?
I can test some things in de afternoon (by my neighbours where my WL-500g stands) :)
I will post...
When I use promisc 0 the port immediately dies (while I have NOT transfered a lot of data) or MUST the port die before I can use prosmisc 0 to test the reaction :confused:
OK, I tried the following through telnet (remotely)
et -i eth1 promisc 0
result: WAN port dies
et -i eth1 promisc 1
result: WAN normaly
So in my situation is exactly the other way around ...