If you have recently updated to itunes 10, you have no doubt noticed that the ability to stream your library on the wl-700ge no longer works. I tried updating mt-daapd but I was already current. ...
Type: Posts; User: medsource
If you have recently updated to itunes 10, you have no doubt noticed that the ability to stream your library on the wl-700ge no longer works. I tried updating mt-daapd but I was already current. ...
MY wl700ge (now running kfurge 1.0.7.8) is running multiple personal websites (these are separate from the web based configuration pages). The multihoming component simply means that one IP and port...
Found my answer:
I went into the router via telnet and looked thru the nvram settings using:
nvram show
I then found the errant entries. They were listed in the nvram as forward_port#...
I'm running the 1.0.7.8 custom firmware and noticed something weird. There are extra ports in the port forwarding summary that are not in my static port forwarding table (in the advanced settings). ...
Is that really your dropbear start command??? If so you have a typo. You have put in the path opt/val/log in the dropbear start command and have fail2ban looking in opt/var/log. Dunno off hand...
You only need to do this if you have another router IN FRONT of the wl-700ge. If the wl-700ge is your router then you should not need to make any port forwarding modifications.
Well I'm not sure why asus would tell you this. I just checked my website using the ip only and no extra port numbers from my workplace (eg an outside location) and everything went as expected. Did...
Glad to hear that you got it working; but, I'm confused as to why you think that once you exit out of telnet that ushare would stop working (or why it actually does for you). I've never had that...
For heaven's sake don't comment out that line!!! Did you read what it does??? You are turning off an error correction mechanism!!!
If you did declare the value of the argument of True/Yes/1 then...
Are you really surfing from the extranet (I mean like surfing from a neighbors house) or are you simply surfing to your public ip / domain from within your lan again? If it is the latter then you...
Ah, I think I get where you are going. Your personal web page goes in the Photo folder (yeah I know it makes no sense). You need to turn ON the web server and turn OFFthe default web page and turn...
From within your lan you need to type <www.yourwebaddress.dyndns.com:8081> (without the brackets of course)
If you are outside your lan then the :8081 is not needed.
Kfurge:
I remember back when you were working on the 1.0.4.6 firmware that you noticed that asus had done some customization to vsftpd. Question: did they use the new vsftpd release in the new...
I'm assuming you are using the new vsftpd in the oleg optware repository? If so, yeah it does work in that mode, though it does seem to break the nice tie-in that the asus flavor has with the GUI...
Answered my own question... tried the new version and wasn't surprised by the results. Asus did tweak their distro to tie in with the GUI user access and security. This newer version does not. ...
To those who pine for the days of velcro shoes...
If you want to preserve the spindown option for the HDD you will need to send the vsftpd log file to a location that IS using cramfs (ram disk). ...
You might run into a problem with that log location for two reasons...
1) Unless /opt/var/log is cramfs (need to check the mount point for that) then everytime you experience an attack this data...
<rant>
Well, that lovely public bash really makes me want to check my config files and cron scripts WHEN I GET HOME TO WHERE MY WL-700GE IS to help you out.
Maybe you should learn to ask...
I changed, in the vsftpd.conf file, the location and method of the logging. I set it (if memory serves correct) to /var/tmp/log and called it ftp.log (I think). I then set a cron job to run a...
Did the performance improve also??? The included version of vsftpd blew chunks with large directories. I did like the tie-in of vsftpd to the security settings in the GUI, were these preserved in...
What errors appeared in your syslog? what logging level were you using? did the same thing happen when installing / running under python2.5? Did you modify the jail.conf before running in...
1. You'll need to be running a custom firmware (such as Kfurge 1.0.4.6 2a)
2. Install the uShare software via ipkg (same as you would any other ipkg install)
3. Edit the config file and launch....
Firstly you need python installed (2.4 and 2.5)
Then download the fail2ban sw from their server (http://www.fail2ban.org/wiki/index.php/Main_Page)
Install it (you'll have to mod the setup.cfg...
Firstly you need python installed (2.4 and 2.5)
Then download the fail2ban sw from their server (http://www.fail2ban.org/wiki/index.php/Main_Page)
Install it (you'll have to mod the setup.cfg...
You could also try uShare. I'm running it instead of the default as I get fewer crashes with my PS3